BioResources banner figure College of Natural Resources

About the Journal:
Author's
instructions
Editorial board
Editorial policies
Print edition
Open Journal Systems (OJS) Features:
Author submissions
Reviewer functions
Keyword search
Article Files by Category:
Back & current issues
Editorials
Research articles
Scholarly reviews
Special conference collection issues
Gifts to Journal:
Why give
Online gifts
By check, other
Resources:
Opportunities for graduate study and research
Home page, this site

Cover images:

Bordered pits in Scots pine wood

Bambusa cross-section

Copper-plated wood

Ancient wood

Forest litter: leaves, pine needles

Compressed_Wood

Shredded_MOW

Stained fiber sheath

Cover Vol 5 Issue 2, Lake Johnson

Coastal Scene, BioResources Vol. 5, Issue 1

Cover 4_4: wasp paper

BioRes 4(3) Electrospun

Cover 4 issue 2 Vuokatti, Finland view

Black gum

Cover 3 4

BioRes 3 3 white pine theme

Kraft fibers seen with polarized light

Haybales

Sap on cut douglas fir

Oil Palm Cover

Cover May 2007

Cover, Volume 2, Issue 1

Cover of issue 2, vol. 1

Cover, Vol. 1, Issue 1

BioResources
(http://www.bioresources.com; ISSN: 1930-2126)

BioResources is a peer-reviewed online journal devoted to the science and engineering of lignocellulosic materials, chemicals, and their applications for new uses and new capabilities. Articles can be searched on scholarly databases. An impact factor of 1.418 is listed in the 2010 Journal Citation Reports (ISI Web of Knowledge).

Features of issue no. 7(2), May 2012:
(currently in the process of building)

Lucia, L. A. (2012). "Biomass education in the twenty-first century," BioRes. 7(2), 1383-1384.
Shen, J., and Qian, X. "Application of fillers in cellulosic paper by surface filling: An interesting alternative or supplement to wet-end addition," BioRes. 7(2), 1385-1388. PDF
López Leal, M. A., Cortés Martínez, R., Alfaro Cuevas Villanueva, R., Martínez Flores, H. E., and Cortés Penagos, C. d. J. (2012). "Arsenate biosorption by iron-modified pine sawdust in batch systems: Kinetic and equilibrium studies," BioRes. 7(2), 1389-1404. PDF
Lv, Z., Dong, J., and Zhang, B. (2012). "Rapid identification and detection of flavonoid compounds from bamboo leaves by LC-(ESI)-IT-TOF/MS," BioRes. 7(2), 1405-1418. PDF
Terzi, E. Dogu, D., Kurt, F., Kartal, S. N., and Green III, F. (2012). "Effects of leaching medium on leachability of wood preserving N'N-hydroxynapthalimide (NHA)," BioRes. 7(2), 1419-1430. PDF
Grünewald, T., Ostrowski, S., Petutschnigg, A., Musso, M., and Wieland, S. (2012). "Structural analysis of wood-leather panels by Raman spectroscopy," BioRes. 7(2), 1431-1439. PDF
Mamiński, M. Ł., Szymański, R., Parzuchowski, P., Antczak, A., and Szymona, K. (2012). "Hyperbranched polyglycerols with bisphenol A core as glycerol-derived components of polyurethane wood adhesives," BioRes. 7(2), 1440-1451. PDF
Rudi, Bhat, I. u. H., Abdul Khalil, H. P. S., Naif, A., and Hermawan, D. (2012). "Evaluation of antitermitic activity of different extracts obtained from Indonesian teakwood (Tectona grandis L.f)," BioRes. 7(2), 1452-1461. PDF
Chen, Q., Ni, Y., and He, Z. (2012). "Substitution of high-yield-pulp for hardwood bleached kraft pulp in paper production and its effect on alkenyl succinic anhydride sizing," BioRes. 7(2), 1462-1473. PDF
Chen, Y., Fan, Y., Tshabalala, M. A., Stark, N. A., Gao, J., and Liu, R. (2012). "Optical property analysis of thermally and photolytically aged Eucalyptus camaldulensis chemithermomechanical pulp (CTMP)," BioRes. 7(2), 1474-1487. PDF
Martín-Sampedro, R., Rodríguez, A., Requejo, A., and Eugenio, M. E. (2012). "Improvement of TCF bleaching of olive tree pruning residue pulp by addition of a laccase and/or xylanase pre-treatment," BioRes. 7(2), 1488-1503. PDF

Features of issue no. 7(1), Feb. 2012:

Kumar, S., Bhalla, A., Shende, R. V., and Sani, R. K. (2012). "Decentralized thermophilic biohydrogen: A more efficient and cost-effective process," BioRes. 7(1), 1-2.
Zhu, S., Tong, Y., Lv, Y., and Wu, Y. (2012). "Use of ionic liquids to improve the production of hydroxymethylfurfural from renewable resources," BioRes. 7(1), 3-4. PDF
Li, Y., Dai, H., Wan, L., and Zhu, Z. (2012). "Surface sizing application of waterborne epoxy resin on low basis weight paper," BioRes. 7(1), 5-14. PDF
Takeno, K., Yokoyama, T., and Matsumoto, Y. (2012). "Effect of solvent on the beta-O-4 bond cleavage of a lignin model compound by tert-butoxide under mild conditions," BioRes. 7(1), 15-25. PDF
Shahverdi, M., Dashti, H., and Hossein, M. A. (2012). "Establishing a kiln drying schedule for poplar (Populus alba L.) lumber of 7 cm thickness," BioRes. 7(1), 26-37. PDF
Chaochanchaikul, K., Jayaraman, K., Rosarpitak, V., and Sombatsompop, N. (2012). "Influence of lignin content on photodegradation in wood/HDPE composites under UV weathering," BioRes. 7(1), 38-55. PDF
Youngsukkasem, S., Rakshit, S. K., and Taherzadeh, M. J. (2012). "Biogas production by encapsulated methane-producing bacteria," BioRes. 7(1), 56-65. PDF
Dong, C., Long, Z., Pang, Z., Luo, Y., and Li, X. (2012). "Effect of papermaking conditions on the retention of reversible thermochromic microcapsule in paper," BioRes. 7(1), 66-77. PDF
Silva, C. G., Benaducci, D., and Frollini, E. (2012). "Lyocell and cotton fibers as reinforcements for a thermoset polymer," BioRes. 7(1), 78-98. PDF
Chang, X. F., Olson, J. A., and Beatson, R. P. (2012). "A comparison between the effects of ozone and alkaline peroxide treatments on TMP properties and subsequent low consistency refining," BioRes.7(1), 99-111. PDF
López Rivilli, P., Alarcón, R., Isasmendi, G. L., and Pérez, J. D. (2012). "Stepwise isothermal fast pyrolysis (SIFP). Part II. SIFP of peanut shells - Antifungal properties of phenolic fractions," BioRes. 7(1), 112-117. PDF
Requejo, A., Feria, M. J., Vargas, F., and Rodríguez, A. (2012). "Total use of olive tree prunings by means of hydrothermal and combustion processes," BioRes. 7(1), 118-134. PDF
Gao, Y., Zhou, Y., Zhang, X., Zhang, L., and Qu, P. (2012). "Synthesis and characteristics of graft copolymers of poly(butyl acrylate) and cellulose fiber with ultrasonic processing as a material for oil absorption," BioRes. 7(1), 135-147. PDF
Mihailescu Amalinei, R. L., Miron, A., Volf, I., Paduraru, C., and Tofan, L. (2012). "Investigations on the feasibility of Romanian pine bark wastes conversion into a value-added sorbent for Cu(II) and Zn(II) ions," BioRes. 7(1), 148-160. PDF
Behrooz, R., Ghasemi, S., Atoii, G. A., and Fatehi, P. (2012). "Mg(OH)2-based hydrogen peroxide bleaching of CMP pulps at high consistency," BioRes. 7(10), 161-172. PDF
Ferreira, J. A., Lennartsson, P. R., Niklasson, C., Lundin, M., Edebo, L., and Taherzadeh, M. J. (2012). "Spent sulphite liquor for cultivation of an edible Rhizopus sp.," BioRes. 7(1), 173-188. PDF
Naji, H. R., Sahri, M. H., Nobuchi, T., and Bakar, E. S. (2012). "Clonal and planting density effects on some properties of rubber wood (Hevea brasiliensis Muell. Arg.)," BioRes. 7(1), 189-202. PDF
Xu, L., and Tschirner, U. (2012). "Peracetic acid pretreatment of alfalfa stem and aspen biomass," BioRes. 7(1), 203-216. PDF
Pirraglia, A., Gonzalez, R., Saloni, D., Wright, J., and Denig, J. (2012). "Fuel properties and suitability of Eucalyptus benthamii and Eucalyptus macarthurii for torrefied wood and pellets," BioRes. 7(1), 217-235. PDF
Ogawa, M., Bardant, T. B., Sasaki, Y., Tamai, Y., Tokura, S., and Uraki, Y. (2012). "Electricity-free production of activated carbon from biomass in Boneo to improve water quality," BioRes. 7(1), 236-245. PDF
Arami-Niya, A., Abnisa, F., Shafeeyan, M. S., Wan Daud, W. M. A., and Sahu, J. N. (2012). "Optimization of synthesis and characterization of palm shell-based bio-char as a by-product of bio-oil production process," BioRes. 7(1), 246-264. PDF
Jahan Latibari, A., Pourali, K., and Roghani, A. F. (2012). "Alkaline peroxide mechanical pulping of fast-growth paulownia wood," BioRes. 7(1), 265-274. PDF
Wang, X., Hu, J., Liang, Y., and Zeng, J. (2012). "TCF bleaching character of soda-anthraquinone pulp from oil palm frond," BioRes. 7(1), 275-282. PDF
Feria, M. J., García, J. C., Pérez, A., Gomide, J. L., Colodette, J. L., and López, F. (2012). "Process optimization in kraft pulping, bleaching, and beating of Leucaena diversifolia," BioRes. 7(1), 283-297. PDF
Chen, G.-F., and Liu, M.-H. (2012). "Adsorption of L-lysine from aqueous solution by spherical lignin beads: Kinetics and equilibrium studies," BioRes. 7(1), 298-314. PDF
Lee, J. Y., Youn, H. J., and Lee, H. L. (2012). "Fundamental study for quantitative analysis of the fluorescent whitening agent (FWA) content of paper and process water," BioRes. 7(1), 315-326. PDF
Quintanar Gómez, S., Arana-Cuenca, A., Mercado Flores, Y., Gracida Rodríguez, J. N., and Téllez-Jurado, A. (2012). "Effect of particle size and aeration on the biological delignification of corn straw using Trametes sp. 44," BioRes. 7(1), 327-344. PDF
Zhang, Y., Liu, Y.-Y., Xu, J.-L., Yuan, Z.-H., Qi, W., Zhuang, X.-S., and He, M.-C. (2012). "High solid and low enzyme loading based saccharification of agricultural biomass," BioRes. 7(1), 345-353. PDF
Sang, Y., McQuaid, M., and Englezos, P. (2012). "Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper," BioRes. 7(1), 354-373. PDF
Peng, H., Hu, Z., Yu, Z., Zhang, J., Liu, Y., Wan, Y., and Ruan, R. (2012). "Fractionation and thermal characterization of hemicelluloses from bamboo (Phyllostachys pubescens Mazel) culm," BioRes. 7(1), 374-390. PDF
Janga, K. K., Hägg, M.-B., and Moe, S. T. (2012). "Influence of acid concentration, temperature, and time on decrystallization in two-stage concentrated sulfuric acid hydrolysis of pinewood and aspenwood: A statistical approach," BioRes. 7(1), 391-411. PDF
Radeva, G., Valchev, I., Petrin, S., Valcheva, E., and Tsekova, P. (2012). "Kinetic study of the enzyme conversion of steam exploded Paulownia Tomentosa to glucose," BioRes. 7(1), 412-421. PDF
Mishra, S. P., Manent, A.-S., Chabot, B., and Daneault, C. (2012). "Production of nanocellulose from native cellulose - Various options utilizing ultrasound," BioRes. 7(1), 422-436. PDF
Ustaomer, D., and Usta, M. (2012). "The effects of boron compounds and different melamine contents in MUF resins on some properties of MDF panels," BioRes. 7(1), 437-446. PDF
Liu, C., Yang, X., Cui, J., Zhou, Y., Hu, L., Zhang, M., and Liu, H. (2012). "Tung oil based monomer for thermosetting polymers: Synthesis, characterization, and copolymerization with styrene," BioRes. 7(1), 447-463. PDF
Guisado, G., López, M. J., Vargas-García, M. C., Suárez-Estrella, F., and Moreno, J. (2012). "Pseudallescheria angusta, a ligninolytic microorganism for wood fibres biomodification," BioRes. 7(1), 464-474. PDF
Chaiarrekij, S., Apirakchaiskul, A., Suvarnakich, K., and Kiatkamjornwong, S. (2012). "Kapok I: Characteristics of kapok fiber as a potential pulp source for papermaking," BioRes. 7(1), 475-488. PDF
Hu, J., Lei, T., Shen, S., and Zhang, Q. (2012). "Optimal design and evaluation of a ring-die granulator for straws," BioRes. 7(1), 489-503. PDF
Ding, W.-D., Koubaa, A., and Chaala, A. (2012). "Dimensional stability of methyl methacrylate hardened hybrid poplar wood," BioRes. 7(1), 504-520. PDF
Salmén, L., Olsson, A.-M., Sevanic, J. S., Simonović, J., and Radotić, K. (2012). "Structural organisation of the wood polymers in the wood fibre structure," BioRes. 7(1), 521-532. PDF
Ma, H., Zhou, B., Li, Y., and Argyropoulos, D. S. (2012). "Conversion of fructose to 5-hydroxymethyl-furfural with a functionalized ionic liquid," BioRes. 7(1), 533-544. PDF
Wang, J., Zhou, X., and Ma, J. (2012). "Preparation and characteristics of a paper-based ultrafiltration membrane," BioRes. 7(1), 545-553. PDF
Hu, L., Zhou, Y., Zhang, M., and Liu, R. (2012). "Characterization and properties of a lignosulfonate-based phenolic foam," BioRes. 7(1), 554-564. PDF
Yildiz, S., Canakci, S., Yildiz, U. C., Ozgenc, O., and Tomak, E. D. (2012). "Improving of the impregnability of refractory spruce wood by Bacillus licheniformis pretreatment," BioRes. 7(1), 565-577. PDF
Kang, N., Liu, Z., Hui, L.-F., Si, C.-L., Cui, L., Zhao, T., and Mao, S.-T. (2012). "Study on the optimum process of acid-catalytic ethanol pretreatment of Chinese triploid poplar to enhance sugar recovery by hydrolysis," BioRes. 7(1), 578-592. PDF
Sun, L., Wang, F., Xie, Y., Feng, J., and Wang, Q. (2012). "The combustion performance of medium density fiberboard treated with fire retardant microspheres," BioRes.7(1), 593-601. PDF
Xue, Y., Jameel, H., and Park, S. (2012). "Strategies to recycle enzymes and their impact on enzymatic hydrolysis for bioethanol production," BioRes. 7(1), 602-615. PDF
Zhang, H., Song, S., Lang, Q., Zhang, J., and Pu, J. (2012). "Kappa number and pulp yield of Acacia spp. with near infrared reflectance (NIR) spectroscopy," BioRes. 7(1), 616-623. PDF
Feng, H., Li, J., and Wang, L. (2012). "The removal of Reactive Red 228 dye from aqueous solutions by chitosan-modified flax shive," BioRes. 7(1), 624-639. PDF
Ribas Batalha, L. A., Colodette, J. L., Gomide, J. L., Barbosa, L. C. A., Maltha, C. R. A., and Borges Gomes, F. J. (2012). "Dissolving pulp production from bamboo," BioRes. 7(1), 640-651. PDF
Song, X., Chen, F., and Liu, F. (2012). "Study on the reaction of alkyl ketene dimer (AKD) and cellulose fiber," BioRes. 7(1), 652-662. PDF
Yao, J., Hu, Y., and Lu, W. (2012). "A wood replacement material of sandwich structure using coir fiber mats and fiberglass fabrics as core layer," BioRes. 7(1), 663-674. PDF
Li, H., Lu, J., and Mo, J. (2012). "Physiochemical lignocellulose modification by the Formosan subterranean termite Coptotermes formosanus Shiraki (Isoptera: Rhinotermitidae) and its potential uses in the production of biofuels," BioRes. 7(1), 675-685. PDF
Yang, X, Liu, P., Hao, Z., Shi, J., and Zhang, S. (2012). "Characterization and identification of freshwater microalgal strains toward biofuel production," BioRes. 7(1), 686-695. PDF
Bazyar, B. (2012). "Decay resistance and physical properties of oil heat treated aspen wood," BioRes. 7(1), 696-705. PDF
Galai, S., Touhami, Y., and Marzouki, M. N. (2012). "Response surface methodology applied to laccases activities exhibited by Stenotrophomonas maltophilia AAP56 in different growth conditions," BioRes. 7(1), 706-726. PDF
Park, N.-J., Lim, H. K., Song, H. Y., Kim, D. R., Lee, K.-I., and Hwang, I. T. (2012). "Cloning, expression, and characterization of an alkalophillic endo-1,4-beta-xylanase from Paenibacillus sp. HPL-002," BioRes. 7(1), 727-742. PDF
Östberg, L., Håkansson, H., and Germgård, U. (2012). "Some aspects of the reactivity of pulp intended for high-viscosity viscose," BioRes. 7(1), 743-755. PDF
Rovio, S., Kallioinen, A., Tamminen, T., Hakola, M., Leskelä, M., and Siika-aho, M. (2012). "Catalysed alkaline oxidation as a wood fractionation technique," BioRes. 7(1), 756-776. PDF
Wang, Z., Xue, J., and Liu, W. (2012). "Nitrogen fixation and chelating property of wheat ammonium sulfite pulping spent liquor," BioRes. 7(1), 777-788. PDF
Treusch, O. G., and Petutschnigg, A. (2012). "A combination of polyethylenimine and phenolic resin as an adhesive for wood-based panels," BioRes. 7(1), 789-798. PDF
Todorović, N., Popović, Z., Milić, G., and Popadić, R. (2012). "Estimation of heat-treated beechwood properties by color change," BioRes. 7(1), 799-815. PDF
Wu, G., Lang, Q., Chen, H., and Pu, J. (2012). "Physical and chemical performance of eucalyptus wood with impregnated chemicals," BioRes. 7(1), 816-826. PDF
Karjalainen, M., Ämmälä, A., Rousu, P., and Niinimäki, J. (2012). "Method for automatic analysis of wheat straw pulp cell types," BioRes. 7(1), 827-840. PDF
Ismail, H., Muniandy, K., and Othman, N. (2012). "Fatigue life, morphological studies, and thermal aging of rattan powder-filled natural rubber composites as a function of filler loading and a silane coupling agent," BioRes. 7(1), 841-858. PDF
Jusoh, E. R., Ismail, M. H. S., Abdullah, L. C., Yunus, R., and Wan Abdul Rahman, W. A. (2012). "Crude palm oil as a bioadditive in polypropylene blown film," BioRes. 7(1), 859-867. PDF
Yu, M., Wang, G., Liu, C., and A, R. (2012). "Precipitation of lignosulphonates from SPORL liquid by calcium hydroxide treatment," BioRes. 7(1), 868-877. PDF
Liu, J., and Hu, H. (2012). "The role of cellulose binding domains in the adsorption of cellulases onto fibers and its effect on the enzymatic beating of bleached kraft pulp," BioRes. 7(10, 878-892. PDF
Wang, X., Liu, J., and Chai, Y. (2012). "Thermal, mechanical, and moisture absorption properties of wood-TiO2 composites prepared by a sol-gel process," BioRes. 7(10, 893-901. PDF
Belosinschi, D., Chabot, B., and Brouillette, F. (2012). "Release paper: Can phosphate esters be an alternative to silicone?" BioRes. 7(1), 902-912. PDF
Su, J., Mosse, W. K. J., Sharman, S., Batchelor, W., and Garnier, G. (2012). "Paper strength development and recyclability with polyamineamine-epichlorohydrin (PAE), BioRes. 7(1), 913-924. PDF
Fang, Chang-Hua, Cloutier, A., Blanchet, P., and Koubaa, A. (2012). "Densification of wood veneers combined with oil-heat treatment. Part II: Hygroscopicity and mechanical properties," BioRes. 7(1), 925-935. PDF
Danesh, M. A., ZiaeiTabari, H., Hosseinpourpia, R., Nazarnezhad, N., and Shams, M. (2012). "Investigation of the morphological and thermal properties of waste newsprint/ recycled polypropylene/ nanoclay composite," BioRes. 7(1), 936-945. PDF
Gao, Q., Shi, S. Q., Li, J., Liang, K., and Zhang, X. (2012). "Soybean meal-based wood adhesives enhanced by modified polyacrylic acid solution," BioRes. 7(1), 946-956. PDF
Muniandy, K., Ismail, H., and Othman, N. (2012). "Biodegradation, morphological, and FTIR study of rattan powder-filled natural rubber composites as a function of filler loading and silane coupling agent," BioRes. 7(1), 957-971. PDF
Yao, H., Zeng, X., Cheng, M., Yun, J., Jing, Z., and Jin, F. (2012). "Catalytic conversion of formic acid to methanol with Cu and Al under hydrothermal conditions," BioRes. 7(1), 972-983. PDF
Halis, R., Tan, H. R., Ashaari, Z., and Mohamed, R. (2012). "Biomodification of kenaf using white rot fungi," BioRes. 7(1), 984-996. PDF
Wang, S., Huang, J., and Chen, F. (2012). "Study on Mg-Al hydrotalcites in flame-retardant paper preparation," BioRes. 7(1), 997-1007. PDF
Wang, X., Hu, J., and Zeng, J. (2012). "Steam explosion pulping of oil palm empty fruit bunch fiber," BioRes. 7(1), 1008-1015. PDF
Ebrahimpour Kasmani, J., Talaeipour, M., Hemmasi, A. H., Mahdavi, S., and Samariha, A. (2012). "Biochemimechanical pulping of hornbeam chips with Panerochaete chrysosporium, " BioRes. 7(1), 1016-1028. PDF
Vaskova, I., Jeng, R., Tyagi, V., Rodriguez, A., and Sain, M. (2012). "Extracellular proteins produced by different species of the fungus Trichoderma on a secondary paper mill sludge substrate," BioRes. 7(1), 1029-1039. PDF
Ioelovich, M., and Morag, E. (2012). "Study of enzymatic hydrollysis of mild pretreated lignocellulosic biomasses," BioRes. 7(1), 1040-1052. PDF
Özşahin, Ş. (2012). "The use of an artificial neural network for modeling the moisture absorption and thickness swelling of oriented strand board," BioRes. 7(1), 1053-1067. PDF
Loo, M. M. L., Hashimm, R., and Leh, C. P. (2012). "Recycling of valueless paper dust to a low grade cellulose acetate: Effect of pretreatments on acetylation," BioRes. 7(1), 1068-1083. PDF
Buyuksari, U. (2012). "Physical and mechanical properties of particleboard laminated with thermally compressed veneer," BioRes. 7(1), 1084-1091. PDF
Shahverdi, M., Tarmian, A., Dashti, H., Ebrahimi, G., and Tajvidi, M. (2012). "Mechanical properties of poplar wood (Populus alba) dried by three kiln drying schedules," BioRes. 7(1), 1092-1099. PDF
Astier, C., Chaleix, V., Faugeron, C., Ropartz, D., Krausz, P., and Gloaguen, V. (2012). "Biosorption of lead(II) on modified barks explalined by the hard and soft acids and bases (HSAB) theory," BioRes. 7(1), 1100-1110. PDF
Wang, X., Zhang, S., Wang, J., Yu, X., and Lu, X. (2012). "Exploring optimal feed to microbes ratio for anaerobic acidogenic fermentation of cassava residue from brewery," BioRes. 7(1), 1111-1122. PDF
Cao, Y., Lu, J., Huang, R., Zhao, X., and Jiang, J. (2012). "Effect of steam-heat treatment on mechanical properties of Chinese fir," BioRes. 7(1), 1123-1133. PDF
Liu, J., Hu, H., and Luo, X. (2012). "Development of a novel empirical model to estimate the kraft pulp yield of fast-growing Eucalyptus," BioRes. 7(1), 1134-1144. PDF
Deng, Y., Feng, X., Yang, D., Yi, C., and Qiu, X. (2012). "Pi-pi stacking of the aromatic groups in lignosulfonates," BioRes. 7(1), 1145-1156. PDF
Chen, Y., Fan, Y., Gao, J, and Stark, N. M. (2012). "The effects of heat treatment on the chemical and color change of black locust (Robinia pseudoacacia) wood flour," BioRes. 7(1), 1157-1170. PDF
Asgher, M., Iqbal, H. M. N., and Asad, M. J. (2012). "Kinetic characterization of purified laccase produced from Trametes versicolor IBL-04 in solid state bio-processing of corncobs," BioRes. 7(1), 1171-1188. PDF
Kunjadia, P. D., Patel, F. D., Nagee, A., Mukhopadhyaya, P. N., and Dave, G. S. (2012). "Crystal violet (triphenylmethane dye) decolorization potential of Pleurotus ostreatus (MTCC 142)," BioRes. 7(1), 1189-1199. PDF
Abed, I., Paraschiv, M., Loubar, K., Zagrouba, F., and Tazerout, M. (2012). "Thermogravimetric investigation and thermal conversion kinetics of typical North African and Middle Eastern lignocellulosic wastes," BioRes. 7(1), 1200-1220. PDF
Islam, M. S., Hamdan, S., Rusop, M., Rahman, M. R., Ahmed, A. S., and Mohd Idrus, M. A. M. (2012). "Dimensional stability and water repellent efficiency measurement of chemically modified tropical light hardwood," BioRes. 7(1), 1221-1231. PDF
Gindl-Altmutter, W., and Keckes, J. (2012). "The structure and mechanical properties of spines from the cactus Opuntia ficus-indica," BioRes. 7(1), 1232-1237. PDF
Tondi, G., Wieland, S., Lemenager, N., Petutschnigg, A., Pizzi, A., and Thevenon, M.-F. (2012). "Efficacy of tannin in fixing boron in wood: Fungal and termite resistance," BioRes. 7(1), 1238-1252. PDF
Rosner, S. (2012). "Waveform features of acoustic emission provide information about reversible and irreversible processes during spruce sapwood drying," BioRes. 7(1), 1253-1263. PDF
Baillères, H., Hopewell, G., Boughton, G., and Brancheriau, L. (2012). "Strength and stiffness assessment technologies for improving grading effectiveness of radiata pine wood," BioRes. 7(1), 1264-1282. PDF
Segerholm, B. K., Ibach, R., and Wålinder, M. E. P. (2012). "Moisture soprtion in artificially aged wood-plastic composites," BioRes. 7(1), 1283-1293. PDF
Jones, S. M., van Dyk, J. S., and Pletschke, B. I. (2012). "Bacillus subtilis SJ01 produces hemicellulose degrading multi-enzyme complexes," BioRes. 7(1), 1294-1309. PDF
López, J. P., Mutjé, P., Pèlach, M. À., El Mansouri, N.-E., Boufi, S., and Vilaseca, F. (2012). "Analysis of the tensile modulus of polypropylene composites reinforced with stone groundwood fibers," BioRes. 7(1), 1310-1323. PDF
Gao, Y., Qin, M., Yu, H., and Zhang, F. (2012). "Effect of heat-dispersing on stickies and their removal in post-flotation," BioRes. 7(1), 1324-1336. PDF
Yoshihara, H. (2012). "Influence of the specimen depth to length ratio and lamination construction on Young's modulus and in-plane shear modulus of plywood measured by flexural vibration," BioRes. 7(1), 1337-1351. PDF
Hashim, R., Wan Nadhari, W. N. A., Sulaiman, O., Sato, M., Hiziroglu, S., Kawamura, F., Sugimoto, T., Seng, T. G., and Tanaka, R. (2012). "Properties of binderless particleboard panels manufactured from oil palm biomass," BioRes. 7(1), 1352-1365. PDF
Huber, P., and Carré, B. (2012). "Decolorization of process waters in deinking mills and similar applications: A review," BioRes. 7(1), 1366-1382. PDF

Features of issue no. 6(4), Nov. 2011:

Wang, Q., Ou, R., Shen, X., and Xie, Y. (2011). "Plasticizing cell walls as a strategy to produce wood-plastic composites with high wood content by extrusion processes," BioRes. 6(4), 3621-3622.
Santos, R. B.., Capanema, E. A., Balakshin, M. Y., Chang, H.-M., and Jameel, H. (2011). "Effects of hardwoods characteristics on kraft pulping process: Empahsis on lignin structure," BioRes. 6(4), 3623-3637. PDF
Wang, C., Chin, Y. F., and Tong, G. (2011). "The effect of cationic surfactants on xerographic toner agglomeration under alkaline pulping condition," BioRes. 6(4), 3638-3655. PDF
Srivastava, P., and Hasan, S. H. (2011). "Biomass of Mucor heimalis for the biosorption of cadmium from aqueous solutions: Equlibrium and kinetic studies," BioRes. 6(4), 3656-3675. PDF
Roohnia, M., Manouchehri, N., Tajdini, A., Yaghmaeipour, A., and Bayramzadeh, V. (2011). "Modal frequencies to estimate the defect position in a flexural wooden beam," BioRes. 6(4), 3676-3686. PDF
Porankiewicz, B., Axelsson, B., Grönlund, A., and Marklund, B. (2011). "Main and normal cutting forces by machining wood of Pinus sylvestris," BioRes. 6(4), 3687-3713. PDF
Santiagoo, R., Ismail, H., and Hussin, K. (2011). "Mechanical properties, water absorption, and swelling behaviour of rice husk powder filled polypropylene/recycled acrylonitrile butadiene rubber (PP/NBr/RHP) biocomposites using silane as a coupling agent," BioRes. 6(4), 3714-3726. PDF
Tofan, L., Paduraru, C., Volf, I., and Toma, O. (2011). "Waste of rapeseed from biodiesel production as a potential biosorbent for heavy metal ions," BioRes. 6(4), 3727-3741. PDF
Ismail, H., Omar, N. F., and Othman, N. (2011). "The effect of kenaf fibre loading on curing characterisitics and mechanical properties of waste tyre dust/kenaf fibre hybrid filler filled natural rubber compounds," BioRes. 6(4), 3742-3756. PDF
Khazabi, M., Gu, R., and Sain, M. (2011). "Fiber reinforced soy-based polyruethane spray foam insulation. Part 1: Cell morphologies," BioRes. 6(4), 3757-3774. PDF
Gu, R., Khazabi, M., and Sain, M. (2011). "Fiber reinforced soy-based polyurethane spray foam insulation. Part 2: Thermal and mechanical properties," BioRes. 6(4), 3775-3790. PDF
Kang, L., Wang, W., Pallapolu, V. R., and Lee, Y. Y. (2011). "Enhanced ethanol production from de-ashed paper sludge by simultaneous saccharification and fermentation and simultaneous saccharification and co-fermentation," BioRes. 6(4), 3791-3808. PDF
Lee, C. K., Ibrahim, D., Ibrahim, C. O., and Wan Rosli, W. D. (2011). "Pilot scale enzymatic deinking of mixed office wastepaper and old newspaper," BioRes. 6(4), 3809-3823. PDF
Hänninen, T., Kontturi, E., Leppänen, K., Serimaa, R., and Vuorinen, T. (2011). "Kraft pulping of Juniperus communis results in paper with unusually high elasticity," BioRes. 6(4), 3824-3835. PDF
Ghali, L., Aloui, M., Zidi, M., Ben Daly, H., M'sahli, S., and Sakli, F. (2011). "Effect of chemical modification of Luffa cylindrica fibers on the mechanical and hydrothermal behaviours of polyester/luffa composites," BioRes. 6(4), 3836-3849. PDF
Cui, L., Liu, Z., Hui, L.-F., and Si, C.-L. (2011). "Effect of cellobiase and surfactant supplementation on the enzymatic hydrolysis of pretreated wheat straw," BioRes. 6(4), 3850-3858. PDF
Lee, C. K., Ibrahim, D., Ibrahim, C. O., and Wan Rosli, W. D. (2011). "Enzymatic and chemical deinking of mixed office wastepaper and old newspaper: Paper quality and effluent characteristics," BioRes. 6(4), 3859-3875. PDF
Singh, S., Dutt, D., and Tyagi, C. H. (2011). "Environmentally friendly totally chlorine free bleaching of wheat straw pulp using novel cellulase-poor xylanases of wild strains of Coprinellus disseminatus," BioRes. 6(4), 3874-3882. PDF
Espinoza, O., Bond, B. H., and Buehlmann, U. (2011). "Energy and the US hardwood industry - Part 1: Profile and impact of prices," BioRes. 6(4), 3883-3898. PDF
Espinoza, O., Buehlmann, U., and Bond, B. H. (2011). "Energy and the US hardwood industry - Part II: Responses to Increasing Prices," BioRes. 6(4), 3899-3914. PDF
Karas, M., and Muszyński, L. (2011). "Sustainable bio-composites for highway infrastructure: Feasibility of material substitution in existing products," BioRes. 6(4), 3915-3932. PDF
Yapıcı, F., Uysal, B., Kurt, Ş., Esen, R., and Özcan, C. (2011). "Impacts of impregnation chemicals on finishing process and combustion properties of oriental beech (Fagus orientalis L.) wood," BioRes. 6(4), 3933-3943. PDF
Ma, J., Zhang, Z., Yang, G., Mao, J., and Xu, F. (2011). "Ultrastructural topochemistry of cell wall polymers in Populus nigra by transmission electron microscopy and Raman imaging," BioRes. 6(4), 3944-3959. PDF
Gao, Z., Wang, X.-M., Wan, H., and Brunette, G. (2011). "Binderless panels made with black spruce bark," BioRes. 6(4), 3960-3972. PDF
Jamalirad, L., Doosthoseini, K., Koch, G., Mirshokraie, S. A., and Hedjazi, S. (2011). "Physical and mechanical properties of plywood manufactured from treated red-heart beech (Fagus orientalis L.) wood veneers," BioRes. 6(4), 3973-3986. PDF
Pan, H., and Eberhardt, T. L. (2011). "Characterization of fly ash from the gasification of wood and assessment for its application as a soil amendment," BioRes. 6(4), 3987-4004. PDF
Pan, G. X. (2011). "Improving hydrogen peroxide bleaching of aspen CTMP by using aqueous alcohol media," BioRes. 6(4), 4005-4011. PDF
Guller, B., Isik, K., and Cetinay, S. (2011). "Genetic variation in Pinus brutia Ten.: Wood density traits," BioRes. 6(4), 4012-4027. PDF
Marashdeh, M. W., Hashim, R., Tajuddin, A. A., Bauk, S., and Sulaiman, O. (2011). "Effect of particle size on the characterization of binderless particleboard made from Rhizophora spp. mangrove wood for use as phantom material," BioRes. 6(4), 4028-4044. PDF
Wang, Z., Lin, W., and Song, W. (2011). "Theoretical study of the conversion from 5-hydroxymethylfuran-2-carbaldehyde to 2-hydroxy-5-methylene-2,5-dihydro-furan-2-carbaldehyde in the levulinic acid formation process," BioRes. 6(4), 4045-4054. PDF
Xie, Y., Tong, Q., Chen, Y., Liu, J., and Lin, M. (2011). "Manufacture and properties of ultra-low density fibreboard from wood fibre," BioRes. 6(4), 4055-4066. PDF
Taghiyari, H. R., Rangavar, H., and Farajpour Bibalan, O. (2011). "Effect of nano-silver on reduction of hot-pressing time and improvement in physical and mechanical properties of particleboard," BioRes. 6(4), 4067-4075. PDF
Yildirim, I., Ozsahin, S., and Akyuz, K. C. (2011). "Prediction of the financial return of the paper sector with artificial neural networks," BioRes. 6(4), 4076-4091. PDF
Guo, Z., Wang, S., Guo, L., and Li, X. (2011). "Catalytic steam reforming of ethanol for hydrogen production over Ni/CeO2-ZrO2 catalysts," BioRes. 6(4), 4092-4102. PDF
Akpinar, O., Levent, O, Sabanci, S., Uysal, R. S., and Sapci, B. (2011). "Optimization and comparison of dilute acid pretreatment of selected agricultural residues for recovery of xylose," BioRes. 6(4), 4103-4116. PDF
Adeogun, A. I., Ofudje, A. E., Idowu, M., and Kareem, S. O. (2011). "Equilibrium, Kinetic, and thermodynamic studies of the biosorption of Mn(II) ions from aqueous solution by raw and acid-treated corncob biomass," BioRes. 6(4), 4117-4134. PDF
Elenga, R. G., Dirras, G. F., Maniongui, J. G.., and Mabiala, B. (2011). "Thin-layer drying of Raffia textilis fiber," BioRes. 6(4), 4135-4144. PDF
Guo, D.-L., Wu, S.-B., Lou, R., Yin, X.-L., and Yang, Q. (2011). "Effect of organic bound Na groups on pyrolysis and CO2-gasification of alkali lignin," BioRes. 6(4), 4145-4157. PDF
Peng, P., Zhou, X., and Ma, J. (2011). "Water glass compound starch used as surface sizing agent to improve the strength of linerboard," BioRes. 6(4), 4158-4167. PDF
McLean, D., Agarwal, V., Stack, K., Horne, J., and Richardson, D. (2011). "Synthesis of guar gum-graft-poly(acrylamide-co-diallyldimethylammonium chloride) and its application in the pulp and paper industry," BioRes. 6(4), 4168-4180. PDF
Cserta, E., Hegedűs, G., and Németh, R. (2011). "Drying process in Norway spruce wood exposed to infrared radiation," BioRes. 6(4), 4181-4189. PDF
Kord, B., Danesh, M. A., Veysi, R., and Shams, M. (2011). "Effect of virgin and recycled plastics on moisture sorption of nanocomposites from newsprint fiber and organoclay," BioRes. 6(4), 4190-4199. PDF
Eronen, P., Junka, K., Laine, J., and Österberg, M. (2011). "Interaction between water-soluble polysaccharides and native nanofibrillar cellulose thin films," BioRes. 6(4), 4200-4217. PDF
Link, M., Kolbitsch, C., Tondi, G., Ebner, M., Wieland, S., and Petutschnigg, A. (2011). "Formaldehyde-free tannin-based foams and their use as lightweight panels," BioRes. 6(4), 4218-4228. PDF
Liu, S., Fang, G., Wang, Q., Deng, Y., and Han, S. (2011). "Kinetic modeling of enzymatic hydrolysis of poplar waste by wet oxidation pretreatment," BioRes. 6(4), 4229-4237. PDF
Kalagar, M., Khademieslam, H., Bazyar, B., and Hejazi, S. (2011). "Morphology and mechanical properties of alkali-treated rice straw flour-polypropylene composites," BioRes. 6(4), 4238-4246. PDF
Budakçı, M., İlçe, A. C., Korkut, D. S., and Gürleyen, T. (2011). "Evaluating the surface roughness of heat-treated wood cut with different circular saws," BioRes. 6(4), 4247-4258. PDF
Moutinho, I. M. T., Ferreira, P. J. T., and Figueiredo F., M. L. (2011). "Paper surface chemistry as a tool to improve inkjet printing quality," BioRes. 6(4), 4259-4270. PDF
Li, W., Wang, R., and Liu, S. (2011). "Nanocrystalline cellulose prepared from softwood kraft pulp via ultrasonic-assisted acid hydrolysis," BioRes. 6(4), 4271-4281. PDF
Ferrer, A., Vega, A., Ligero, P., and Rodríguez, A. (2011). "Pulping of empty fruit bunches (EFB) from the palm oil industry by formic acid," BioRes. 6(4), 4282-4301. PDF
Zhang, L., Li, J.-H., Li, S.-Z., and Liu, Z. L. (2011). "Challenges of cellulosic ethanol production from xylose-extracted corncob residues," BioRes. 6(4), 4302-4316. PDF
Asgher, M., and Iqbal, H. M. N. (2011). "Characterization of a novel manganese peroxidase purified from solid state culture of Trametes versicolor IBL-04," BioRes. 6(4), 4317-4330. PDF
Kuokkanen, M., Vilppo, T., Kuokkanen, T., Stoor, T., and Niinimäki, J. (2011). "Additives in wood pellet produciton - A pilot-scale study of binding agent usage," BioRes. 6(4), 4331-4355. PDF
Wang, B., Li, R., He, B., and Li, J. (2011). "The impacts of lignin coverage, relative bonded area, and fiber properties on sheet strength," BioRes. 6(4), 4356-4369. PDF
Spence, K. L., Venditti, R. A., Rojas, O. J., Pawlak, J. J., and Hubbe, M. A. (2011). "Water vapor barrier properties of coated and filled microfibrillated cellulose composite films," BioRes. 6(4), 4370-4388. PDF
Rasat, M. S. M., Wahab, R., Sulaiman, O., Moktar, J., Mohamed, A., Tabet, T. A., and Khalid, I. (2011). "Properties of composite boards from oil palm frond agricultural waste," BioRes. 6(4), 4389-4403. PDF
Boran, F., and Yeşilada, O. (2011). "Enhanced production of laccase by fungi under solid substrate fermentation condition," BioRes. 6(4), 4404-4416. PDF
Ligero, P., van der Kolk, J. C., de Vega, A., and van Dam, J. E. G. (2011). "Production of xylo-oligosaccharides from Miscanthus x giganteus by autohydrolysis," BioRes. 6(4), 4417-4429. PDF
Zhang, H., Zhang, J., Song, S., Wu, G., and Pu, J. (2011). "Modified nanocrystalline cellulose from two kinds of modifiers used for improving formaldehyde emission and bonding strength of urea-formaldehyde resin adhesive," BioRes. 6(4), 4430-4438. PDF
Mancera, C., El Mansouri, N.-E., Ferrando, F., and Salvado, J. (2011). "The suitability of steam exploded Vitis vinifera and alkaline lignin for the manufacture of fiberboard," BioRes. 6(4), 4439-4453. PDF
Asgher, M., Ahmed, N., and Iqbal, H. M. N. (2011). "Hyperproductivity of extracellular enzymes from indigenous white rot fungi (P. chrysosporium IBL-03) by utilizing agro-wastes," BioRes. 6(4), 4454-4467. PDF
Fang, H., Deng, J., and Zhang, X. (2011). "Continuous seam explosion of wheat straw by high pressure mechanical refining system to produce sugars for bioconversion," BioRes. 6(4), 4468-4480. PDF
Shakhes., J., Marandi, M. A. B., Zeinaly, F., Saraian, A., and Saghafi, T. (2011). "Tobacco residuals as promising lignocellulosic materials for pulp and paper industry," BioRes. 6(4), 4481-4493. PDF
Li, L., Yu, S.-T., Liu, F.-S., Xie, C.-X., and Xu, C.-Z. (2011). "Efficient enzymatic in situ saccharification of cellulose in aqueous-ionic liquid media by microwave pretreatment," BioRes. 6(4), 4494-4504. PDF
Ahmed, I., Zia, M. A., Iftikhar, T., and Iqbal, H. M. H. (2011). "Characterization and detergent compatibility of purified protease produced from Aspergillus niger by utilizing agro wastes," BioRes. 6(4), 4505-4522. PDF
El Mansouri, N.-E., Yuan, Q., and Huang, F. (2011). "Study of chemical modification of alkaline lignin by the glyoxylation reaction," BioRes. 6(4), 4523-4536. PDF
Abdul Khalil, H. P. S., Fizree, H. M., Jawaid, M., and Alattas, O. S. (2011). "Preparation and characterization of nano-structured materials from oil palm ash: A bio-agricultural waste from oil palm mill," BioRes. 6(4), 4537-4546. PDF
Ou, R., Guo, C., Xie, Y., and Wang, Q. (2011). "Non-isothermal crystallization kinetics of Kevlar fiber-reinforced wood flour/HDPE composites," BioRes. 6(4), 4547-4565. PDF
Luo, J., Genco, J., Cole, B., and Fort, R. (2011). "Lignin recovered from the near-neutral hemicellulose extraction process as a precursor for carbon fiber," BioRes. 6(4), 4566-4605. PDF
Sönmez, A., Budakçı, M., Demirci, Z., and Akkuş, M. (2011). "Effects of thermal aging on the film hardness of some wood varnishes," BioRes. 6(4), 4594-4605. PDF
Azhar, S., Wang, Y., Lawoko, M., Henriksson, G., and Lindström, M. E. (2011). "Extraction of polymers from enzyme-treated softwood," BioRes. 6(4), 4606-4614. PDF
Hietala, M., Niinimäki, J., and Oksman, K. (2011). "The use of twin-screw extrusion in processing of wood: The effect of processing parameter and pretreatment," BioRes. 6(4), 4615-4625. PDF
Shakhes, J., Zeinaly, F., Marandi, M. A. B., and Saghafi, T. (2011). "The effects of processing variables on the soda and soda-AQ pulping of kenaf bast fiber," BioRes. 6(4), 4626-4639. PDF
Duan, X., Xu, J., He, B., Li, J., and Sun, Y. (2011). "Preparation and rheological properties of cellulose/chitosan homogeneous solution in ionic liquid," BioRes. 6(4), 4640-4651. PDF
Gautam, G., Adhikari, S., Thangalazhy-Gopakumar, S., Brodbeck, C., Bhavnani, S., and Taylor, S. (2011). "Tar analysis in syngas derived from pelletized biomass in a commerical stratified downdraft gasifier," BioRes. 6(4), 4652-4661. PDF
El-Shekeil, Y. A., Salit, M. S., Abdan, K., and Zainudin, E. S. (2011). "Development of a new kenaf bast fiber-reinforced thermoplastic polyurethane composite," BioRes. 6(4), 4662-4672. PDF
Bhat, I.-u.-H., Abdul Khalil, H. P. S., Ismail, H., and Alshammari, T. (2011). "Morphological, spectroscopic, and thermal properties of alkali-treated and chemically modifed oil palm empty fruit bunch fibers and oil palm frond fibers: A comparative study," BioRes. 6(4), 4673-4685. PDF
Qian, Y., Deng, Y., Yi, C., Yu, H., and Qiu, X. (2011). "Solution behaviours and adsorption characteristics of sodium lignosulfonate under different pH conditions," BioRes. 6(4), 4686-4695. PDF
Cao, Y., Lu, J., Huang, R., Zhao, Y., and Wu, Y. (2011). "Evaluation of decay resistance for steam-heat-treated wood," BioRes. 6(4), 4696-4704. PDF
Kang, P., Zheng, Z., Qin, W., Dong, C., and Yang, Y. (2011). "Efficient fractionation of Chinese white poplar biomass with enhanced enzymatic digestability and modified acetone-soluble lignin," BioRes. 4705-4720. PDF
Buyuksari, U.., Akbulut, T., Guler, C., and As, N. (2011). "Wettability and surface roughness of natural and plantation-grown narrow-leaved ash (Fraxinus angustifolia Vahl.) wood," BioRes. 6(4), 4721-4730. PDF
Mashkour, M., Tajvidi, M., Kimura, T.., Kimura, F., and Ebrahimi, G. (2011). "Fabricating unidirectional magnetic papers using permanent magnets to align magnetic nanoparticle covered natural cellulose fibers," BioRes. 6(4), 4731-4738. PDF
Banerjee, S. (2011). "Glucose from paper mill sludge," BioRes. 6(4), 4739-4746. PDF
Robinson, T. J., Via, B. K., Fasina, O., Adhikari, S., and Carter, E. (2011). "Impregnation of bio-oil from small diameter pine into wood for moisture resistance," BioRes. 6(4), 4747-4761. PDF
Ahmad, M. N., Mokhtar, M. N., Baharuddin, A. S., Hock, L. S., Ali, S. R. A., Abd-Aziz, S., Rahman, N. A. A., and Hassan, M. A. (2011). "Changes in physicochemical and microbial community during co-composting of oil palm frond with palm oil mill effluent anaerobic sludge," BioRes. 6(4), 4762-4780. PDF
Tsai, W.-T., Tsai, Y.-L., and Liu, S.-C. (2011). "Utilization of driftwood as an energy source and its environmental and economic benefit analysis in Taiwan," BioRes. 6(4), 4781-4789. PDF
Ang, T. N., Yoon, L. W., Lee, K. M., Ngoh, G. C., Chua, A. S. M., and Lee, M. G. (2011). "Efficiency of ionic liquids in the dissolution of rise husk," BioRes. 6(4), 4790-4800. PDF
Silva, V. L., Lino, A. G., Ribeiro, R. A., Colodette, J. L., Forsström, A., and Wackerberg, E. (2011). "Factors affecting brightness reversion of hardwood kraft pulps," BioRes. 6(4), 4801-4814. PDF
Bachtiar, D., Salit, M. S., Zainudin, E., Abdan, K., and Mohd. Dahlan, K. Z. H. (2011). "Effects of alkaline treatment and a compatibilizing agent on tensile properties of sugar palm fibre-reinforced high impact polystyrene composites," BioRes. 6(4), 4815-4823. PDF
Pilon, G., and Lavoi, J.-M. (2011). "Characterization of switchgrass char produced in torrefaction and pyrolysis conditions," BioRes. 6(4), 4824-4839. PDF
Samarghandy, M. R., Hoseinzade, E., Taghavi, M., and Hoseinzadeh, S. (2011). "Biosorption of Reactive Black 5 from aqueous solution using acid-treated biomass from potato peel waste," BioRes. 6(4), 4840-4855. PDF
Pu, Y., Treasure, T., Gonzalez, R., Venditti, R., and Jameel, H. (2011). "Autohydrolysis pretreatment of mixed hardwoods to extract value prior to combustion," BioRes. 6(4), 4856-4870. PDF
Yoshihara, H. (2011). "Measurement of the Young's modulus and shear modulus of in-plane quasi-isotropic medium-density fiberboard by flexural vibration," BioRes. 6(4), 4871-4885. PDF
Kurt, R., Cil, M., Aslan, K., and Cavus, V. (2011). "Effect of pressure duration on physical, mechanical, and combustibility characteristics of laminated veneer lumber (LVL) made with hybrid poplar clones," BioRes. 6(4), 4886-4894. PDF
Luppold, W. G., and Bumgardner, M. S. (2011). "Thirty-nine years of U.S. wood furniture importing: Sources and products," BioRes. 6(4), 4895-4908. PDF
Shahriarinour, M., Wahab, M. N. A., Ariff, A. B., Mustafa, S., and Mohamad, R. (2011). "Kinetics of cellulase production by Aspergillus terreus at various levels of dissolved oxygen tension in a stirred tank bioreactor," BioRes. 6(4), 4909-4921. PDF
Martín-Sampedro, R., Martín, J. A., Eugenio, M. E., Revilla, E., and Villar, J. C. (2011). "Steam explosion treatment of Eucalyptus globulus wood: Influence of operational conditions on chemical and structural modifications," BioRes. 6(4), 4922-4935. PDF
Olivella, M. À., and del Rio, J. C. (2011). "Suberin composition from different bark layers of Quercus suber L. by PY-GC/MS in the presence of tetramethylammonium hydroxide (TMAH)," BioRes. 6(4), 4936-4941. PDF
Feng, Q., Chen, F., and Wu, H. (2011). "Preparation and characterization of a temperature-sensitive lignin-based Hydrogel," BioRes. 6(4), 4942-4952. PDF
Reinprecht, L., and Hibký, M. (2011). "The type and degree of decay in spruce wood analyzed by the ultrasonic method in three anatomical directions," BioRes. 6(4), 4953-4968. PDF
Moussaoui, Y., Ferhi, F., Elaloui, E., Ben Salem, R., and Belgacem, M. N. (2011). "Utilisation of Astragalus armatus roots in papermaking," BioRes. 6(4), 4969-4978. PDF
Zhang, J., Rizvi, G. M., and Park, C. B. (2011). "Effects of wood fiber content on the rheological properties, crystallization behavior, and cell morphology of extruded wood fiber/HDPE composites foams," BioRes. 6(4), 4979-4989. PDF
Miura, S., and Kitaoka, T. (2011). "In situ synthesis of gold nanoparticles on zinc oxides preloaded into a cellulosic paper matrix for catalytic applications," BioRes. 6(4), 4990-5000. PDF
Liu, Y., Wang, G., Xu, J., Zhang, Y., Liu, C., and Yuan, Z. (2011). "Effect of sulfite pretreatment to overcome the recalcitrance of lignin (SPROL) on enzymatic saccharificaiton of corn stalk," BioRes. 6(4), 5001-5011. PDF
Zhu, Z.-S., Li, X.-H., Zheng, Q.-M., Zhang, Z., Yu, Y., Wang, J.-F., Liang, S.-Z., and Zhu, M.-J. (2011). "Bioconversion of a mixture of paper sludge and extraction liquor from water prehydrolysis of Eucalyptus chips to ethanol using separate hydrolysis and fermentation," BioRes. 6(4), 5012-5026. PDF
Güler, C., and Büyüksarı, Ü. (2011). "Effect of production parameters on the physical and mechanical properties of particleboards made from peanut (Arachis hypogaea L.) hull," BioRes. 6(4), 5027-5036. PDF
López, J. P., Méndez, J. A., El Mansouri, N.-E., Mutjé, P., and Vilaseca, F. (2011). "Mean intrinsic tensile properties of stone groundwood fibers from softwood," BioRes. 6(4), 5037-5049. PDF
Mazzaferro, L. S., Cuña, M. M., and Breccia, J. D. (2011). "Produciton of xylo-oligosaccharides by chemo-enzymatic treatment of agricultural by-products," BioRes. 6(4), 5050-5061. PDF
Sharma, A. K., Dutt, D., Upadhyaya, J. S., and Roy, T. K. (2011). "Anatomical, morphological, and chemical characterization of Bambusa tulda, Dendrocalamus hamiltonii, Bambusa balcooa, Malocana baccifera, Bambusa arundinacea, and Eucalyptus tereticornis," BioRes. 6(4), 5062-5073. PDF
Ibrahim, M., Wan Daud, W. R., and Law, K.-N. (2011). "Comparative properties of soda pulps from stalk, bast, and core of Malaysian grown kenaf," BioRes. 6(4), 5074-5085. PDF
Si, C.-L., Lu, Y.-Y., Qin, P.-P., Sun, R.-C., and Ni, Y.-H. (2011). "Phenolic extractives with chemotaxonomic significance from the bark of Paulownia tomentosa var. tomentosa," BioRes. 6(4), 5086-5098. PDF
Zhang, H., Yuan, Z., Gilbert, D., Ni, Y., and Zou, X. (2011). "Use of a dynamic sheet former (DSF) to examine the effect of filler addition and white water recirculation on fine papers containing high-yield pulp," BioRes. 6(4), 5099-5109. PDF
Mahdavi, M., Ahmad, M. B., Haron, M. J., Rahman, M. Z. A., and Fatehi, A. (2011). "Optimized conditions for graft polymerization of poly(acrylamide) onto rubberwood fibre," BioRes. 6(4), 5110-5120. PDF
Lappi, H. E., and Alén, R. J. (2011). "Pyrolysis of crude tall oil-derived products," BioRes. 6(4), 5121-5138. PDF
Hart, P. W., Colson, G. W., Antonsson, S., and Hjort, A. (2011). "Impact of impregnation on high kappa number hardwood pulps," BioRes. 6(4), 5139-5150. PDF
Shi, Z.-J., Xiao, L.-P., Deng, J., Xu, F., and Sun, R.-C. (2011). "Isolation and characterization of soluble polysaccharides of Dendrocalamus brandisii: A high-yielding bamboo species," BioRes. 6(4), 5151-5166. PDF
Gao, Z., Ma, D., Lv, X., and Wang, Q. (2011). "Formation and evaluation of kraft fibre-reinforced unsaturated polyester (UPE) composites," BioRes. 6(4), 5167-5179. PDF
Safdari, V., Khodadadi, H., Hosseinihashemi, S. K., and Ganjian, E. (2011). "The effects of poplar bark and wood content on the mechanical properties of wood-polypropylene composites," BioRes. 6(4), 5180-5192. PDF
Aslanzadeh, S., Taherzadeh, M. J., and Sárvári Horváth, I. (2011). "Pretreatment of straw fraction of manure for improved biogas production," BioRes. 6(4), 5193-5205. PDF
Abdul Khalil, H. P. S., Marliana, M. M., and Alshammari, T. (2011). "Material properties of epoxy-reinforced biocomposites with lignin from empty fruit bunch as curing agent," BioRes. 6(4), 5206-5223. PDF
Isroi, Millati, R., Syamsiah, S., Niklasson, C., Cahyanto, M. N., Lundquist, K., and Taherzadeh, M. J. (2011). "Biological pretreatment of lignocelluloses with white-rot fungi and its applications: A review," BioRes. 6(4), 5224-5259. PDF
Paridah, M. T., Ahmed, A. B., SaifulAzry, S. O. A., and Ahmed, Z. (2011). "Retting process of some bast plant fibers and its effect on fibre quality: A review," BioRes. 6(4), 5260-5281. PDF
Wang, Z., Xu, J., and Cheng, J. J. (2011). "Modeling biochemical conversion of lignocellulosic materials for sugar production: A review," BioRes. 6(4), 5282-5306. PDF
Area, M. C., and Cheradame, H. (2011). "Paper aging and degradation: Recent findings and research methods," BioRes. 6(4), 5307-5337. PDF

Features of issue no. 6(3), Aug. 2011:

Wang, X., and Sun, R. (2011). "Self-assembled lignocellulose micelles: A new generation of value-added functional nanostructures," BioRes. 6(3), 2288-2290.
Hemmasi, A. H., Khademi-Eslam, H., Pourabbasi, S., Ghasemi, I., and Talaiepour, M. (2011). "Cell morphology and physico-mechanical properties of HDPE/EVA/rice hull hybrid foamed composites," BioRes. 6(3), 2291-2308. PDF
Jawaid, M., and Abdul Khalil, H. P. S. (2011). "Effect of layering pattern on the dynamic mechanical properties and thermal degradation of oil palm-jute fibers reinforced epoxy hybrid composite," BioRes. 6(3), 2309-2322. PDF
Xie, Y., Hill, C. A. S., Sun, D., Jalaludin, Z., Wang, Q., and Mai, C. (2011). "Effects of dynamic aging (hydrolysis and condensation) behaviour of organofunctional silanes in the aqeous solution on their penetrability into the cells walls of wood," BioRes. 6(3), 2323-2339. PDF
Orblin, E., and Fardim, P. (2011). "Interactions between cationic polyelectrolyte and pulp fines," BioRes. 6(3), 2340-2355.
Nenkova, S., Velev, P., Dragnevska, M., Nikolova, D., and Dimitrov, K. (2011). "Lignocellulose nanocomposite containing copper sulfide," BioRes. 6(3), 2356-2365. PDF
Wang, Q., Chen, K., Liu, S., Li, J., and Xu, J. (2011). "Kinetics of bagasse delignification by using high-boiling solvent," BioRes. 6(3), 2366-2374. PDF
Li, W., Wu, L., Di, C., Liu, C., and Sun, R. (2011). "DMAP-catalyzed phthalylation of cellulose with with phthalic anhydride in [bmim]Cl," BioRes. 6(3), 2375-2385. PDF
Tammelin, T., Harlin, A., Vehviläinen, M., Nousiainen, P., and Kolppo, K. (2011). "Method to prepare smooth and even cellulose-lignophenol films," BioRes. 6(3), 2386-2398.
Chen, H., Chen, K., Yang, R., Yang, F., and Gao, W. (2011). "Use of aluminum trihydrate filler to improve the strength properties of cellulosic paper exposed to high temperature treatment," BioRes. 6(3), 2399-2410. PDF
Najafi, A., and Khademi-Eslam, H. (2011). "Lignocellulosic filler/recycled HDPI composites: Effect of filler type of physical and flexural properties," BioRes. 6(3), 2411-2424. PDF
Wang, Y., Lindström, M. E., and Henriksson, G. (2011). "Mild alkaline treatment activates spruce wood for enzymatic processing: A possible stage in biorefinery processes," BioRes. 6(3), 2425-2434.
Chen, X., Qian, X., and An, X. (2011). "Using calcium carbonate whiskers as papermaking filler," BioRes. 6(3), 2435-2447. PDF
Sanchez, R. A., and Espósito, B. P. (2011). "Preparation of sugarcane bagasse modified with the thiophosphoryl function and its capacity for cadmium adsorption," BioRes. 6(2), 2448-2459. PDF
Xu, X., Shang, S., Song, Z., Cui, S., Wang, H., and Wang, D. (2011). "Preparation and characterization of rosin-based waterborne polyurethane from maleopimaric acid polyester polyol," BioRes. 6(3), 2460-2470. PDF
Pereira, P. H. F., Voorwald, H. C. J., Cioffi, M. O. H., Mulinari, D. R., Da Luz, S. M., and Da Silva, M. L. C. P. (2011). "Sugarcane bagasse pulping and bleaching: Thermal and chemical characterization," BioRes. 6(3), 2471-2482. PDF
Jafari-Petroudy, S. R., Resalati, H., and Rezayati-Charani, P. (2011). "Newsprint from soda bagasse pulp in admixture with hardwood CMP pulp," BioRes. 6(3), 2483-2491. PDF

El Mansouri, N.-E., Yuan, Q., and Huang, F. (2011). "Synthesis and characterization of kraft lignin-based epoxy resins," BioRes. 6(3), 2492-2503.

PDF
Yildiz, S., Yildiz, U. C., and Tomak, E. D. (2011). "The effects of natural weathering on the properties of heat-treated alder wood," BioRes. 6(3), 2504-2521. PDF
Saleem, N., and Bhatti, H. N. (2011). "Adsorptive removal and recovery of U(VI) by citrus waste biomass," BioRes. 6(3), 2522-2538. PDF
Guo, Z., Wang, S., Xu, G., and Cai, G. (2011). "Upgrading of bio-oil molecular distillation fraction with solid acid catalyst," BioRes. 6(3), 2539-2550. PDF
Gonzalez, R., Treasure, T., Phillips, R., Jameel, H., and Saloni, D. (2011). "Economics of cellulosic ethanol production: Green liquor pretreatment for softwood and hardwood, greenfield and repurpose scenarios," BioRes. 6(3), 2551-2567. PDF
Yang, G., Lucia, L. A., Chen, J., Cao, X., and Liu, Y. (2011). "Effects of enzyme pretreatment on the beatability of fast-growing poplar APMP pulp," BioRes. 6(3), 2568-2580. PDF
Javed, M. A., and Germgård, U. (2011). "The reactivity of prehydrolyzed softwood kraft pulps after prolonged cooking followed by chlorite delignification," BioRes. 6(3), 2581-2591. PDF
Liu, H.-M., Xie, X.-A., Feng, B., and Sun, R.-C. (2011). "Effect of catalysts on 5-lump distribution of constalk liquefaction in sub-critical ethanol," BioRes. 6(3), 2592-2604. PDF
Cui, L., Li, L., Zhang, A., Pan, G., Bao, D., and Chang, A. (2011). "Biochar amendment greatly reduces rice Cd uptake in a contaminated paddy soil: A two-year field experiment," BioRes. 6(3), 2605-2618. PDF
Dai, L., Dai, H., Yuan, Y., Sun, X., and Zhu, Z. (2011). "Effects of TEMPO oxidation system on kinetic constants of cotton fibers," BioRes. 6(3), 2619-2631. PDF
Abdolahian Sohi, A. M., Khademi-Eslam, H., Hemmasi, A. H., Roohnia, M., and Talaiepour, M. (2011). "Nondestructive detection of the effect of drilling on acoustic performance of wood," BioRes. 6(3), 2632-2646. PDF
El Mansouri, N.-E., Yuan, Q., and Huang, F. (2011). "Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins," BioRes. 6(3), 2647-2662. PDF
Shahriarinour, M., Ramanan, R. N., Abdul Wahab, M. N., Mohamad, R., Mustafa, S., and Ariff, A. B. (2011). "Improved cellulase production by Aspergillus terreus using oil palm empty fruit bunch fiber as substrate in a stirred tank bioreactor through optimization of the fermentation conditions," Biores. 6(3), 2663-2675. PDF
Espinoza, O., Buehlmann, U., Bumgardner, M., and Smith, B. (2011). "Assessing changes in the U.S. hardwood sawmill industry with a focus on markets and distribution," BioRes. 6(3), 2676-2689. PDF
Li, Y, and He, B. (2011). "Characterization of ink pigment penetration and distribution related to surface topography of paper using confocal laser scanning microscopy," BioRes. 6(3), 2690-2702. PDF
Rivilli, P. L., Yranzo, G. I., and Pérez, J. D. (2011). "Stepwise isothermal fast pyrolysis (SIFP) of biomass. Part 1. SIFP of pine sawdust," BioRes.6(3), 2703-2710. PDF
Ghafarzade Mollabashi, O., Saraeian, A. R., and Resalati, H. (2011). "The effect of surfactants application on soda pulping of wheat straw," BioRes. 6(3), 2711-2718. PDF
Teoh, Y. P., Don, M. M., and Ujang, S. (2011). "Media selection for mycelia growth, antifungal activity against wood-degrading fungi, and GC-MS study by Pycnoporus sanguineus," BioRes. 6(3), 2719-2731. PDF
Singh, J., Mishra, N. S., Uma, Banerjee, S., and Sharma, Y. C. (2011). "Comparative studies of physical characteristics of raw and modified sawdust for their use as adsorbents for removal of acid dye," BioRes. 6(3), 2732-2743. PDF
Lin, Y.-S., and Lee, W.-C. (2011). "Simultaneous saccharification and fermentation of alkali-pretreated cogongrass for bioethanon production," BioRes. 6(3), 2744-2756. PDF
Yapici, F., Ozcifci, A., Esen, R., and Kurt, S. (2011). "The effect of grain angle and species on thermal conductivity of some selected wood species," BioRes. 6(3), 2757-2762. PDF
Saloni, D. E., Lemaster, R., and Jackson, S. (2011). "Control system evaluation and implementation for the abrasive machining process on wood," BioRes. 6(3), 2763-2775. PDF
Feng,Y., Liu, H.-Q., Sun, R.-C., and Jiang, J.-X. (2011). "Enzymatic hydrolysis of cellulose from steam-pretreated Lespedeza stalk (Lespedeza crytobotrya) with four Trichoderma cellulases," BioRes 6(3), 2776-2789. PDF
Yuan, G., Dai, H., Ye, C., Zhang, Y., and Wang, Z. (2011). "Adsorption of Ca(II) from aqueous solution onto cellulosic fibers and its impact on the papermaking process," BioRes. 6(3), 2790-2804. PDF
Kılıç, M. (2011). "The effects of the force loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL)," BioRes. 6(3), 2805-2817. PDF
Ioelovich, M., and Morag, E. (2011). "Effect of cellulose structure on enzymatic hydrolysis," BioRes. 6(3), 2818-2835. PDF
Kuutti, L., Haavisto, S., Hyvärinen, S., Mikkonen, H., Koski, R., Peltonen, S., Suortti, T., and Kyllönen, H. (2011). "Properties and flocculation efficiency of cationized biopolymers and their applicability in papermaking and in conditioning of pulp and paper sludge," BioRes. 6(3), 2836-2850. PDF
Mancera, C., El Mansouri, N-E., Vilaseca, F., Ferrando, F., and Salvado, J. (2011). "The effect of lignin as a natural adhesive on the physico-mechanical properties of Vitis vinifera fiberboards," BioRes. 6(3), 2851-2860. PDF
Irshad, M., Asgher, M., Scheikh, M. A., and Nawaz, H. (2011). "Purification and characterization of laccase produced by Schyzophylum commune IBL-06 in solid state culture of banana stalks," BioRes. 6(3), 2861-2873. PDF
Fang, R., Cheng, X.-S., and Lin, W.-S. (2011). "Preparation and application of dimer acid/lignin graft copolymer," BioRes. 6(3), 2874-2884. PDF
Ćilerdžić, J., Stajić, M., Vukojević, J., Duletić-Laušević, S., and Knežević, A. (2011). "Potential of Trametes hirsuta to produce ligninolytic enzymes during degradation of agricultural residues," BioRes. 6(3), 2885-2895. PDF
Cao, X.-F., Yuan, T., Sun, S., and Sun, R.-C. (2011). "Isolation and characterization of soluble polysaccharides from Calamagrostis angustifolia Kom," BioRes. 6(3), 2896-2911. PDF
Pánek, M., and Reinprecht, L. (2011). "Bacillus subtilis for improving spruce wood impregnability," BioRes. 6(3), 2912-2931. PDF
Khanam, Z., Adam, F., Singh, O., and Ahmad, J. (2011). "A novel acylated flavonoidic glycoside from the wood of cultivated Acacia nilotica (L.) Willd. Ex. Delile.," BioRes. 6(3), 2932-2940. PDF
Xin, T.-T., Yuan, T., Xiao, S., and He, J. (2011). "Synthesis of cellulose-graft-poly(methyl methacrylate) via homogeneous ATRP," BioRes. 6(3), 2941-2953. PDF
Gonzalez, R., Phillips, R., Saloni, D., Jameel, H., Abt, R., Pirraglia, A., and Wright, J. (2011). "Biomass to energy in the southern United States: Supply chain and delivered cost," BioRes. 6(3), 2954-2976. PDF
Kemppainen, K., Körkkö, M., and Niinimäki, J. (2011). "Fractional pulping of toner and pigment-based injet ink printed papers - Ink and dirt behavior," BioRes. 6(3), 2977-2989. PDF
Xu, J., Wang, Z., Sharma-Shivappa, R. R., and Cheng, J. J. (2011). "Enzymatic hydrolysis of switchgrass and coastal Bermuda grass pretreated using different chemical methods," BioRes. 6(3), 2990-3003. PDF
Kowaluk, G., Fuczek, D., Beer, P., and Grzeskiewicz, M. (2011). "Influence of the raw materials and production parameters on chosen standard properties for furniture panels of biocomposites from fibrous chips," BioRes. 6(3), 3004-3018. PDF
Danish, M., Hashim, R., Ibrahim, M. N. M., Rafatullah, M., Ahmad, T., and Sulaiman, O. (2011). "Characterization of Acacia mangium wood based activated carbons prepared in the presence of basic activating agents," BioRes. 6(3), 3019-3033. PDF
Wang, Q., Chen, K., Li, J., Yang, G., Liu, S., and Xu, J. (2011). "The solubility of lignin from bagasse in a 1,4-butanediol/water system," BioRes. 6(3), 3034-3043. PDF
Zhang, Y., Cao, C.-Y., Feng, W.-Y., Xue, G.-X., and Xu, M. (2011). "Performance of a pilot-scale membrane process for the concentration of effluent from alkaline peroxide mechanical pulping plants," BioRes. 6(3), 3044-3054. PDF
Kord, B. (2011). "Evaluation on the effect of wood flour and coupling agent content on the hygroscopic thickness swelling rate of polypropylene composites," BioRes. 6(3), 3055-3065. PDF
Xi, E.-H., and Zhao, G.-J. (2011). "Research on differentiated xylem cells based on fractal dimension," BioRes. 6(3), 3066-3079. PDF
Mirski, R., and Dziurka, D. (2011). "Applicability of strand subsitution in the core of OSB," BioRes. 6(3), 3080-3086. PDF
Wang, Y., Chen, K., Mo, L., and Hu, H. (2011). "A cationic polyacrylamide dispersion synthesis by dispersion polymerization in aqueous solution," BioRes. 6(3), 3087-3095. PDF
Gullón, P., Salazar, N., González Muñoz, M. J., Gueimonde, M., Ruas-Madiedo, P., de los Reyes-Gavilán, C. G., and Parajó, J. C. (2011). "Assessment on the fermentability of xylooligosaccharides from rice husks," Biores. 6(3), 3096-3114. PDF
Chaochanchaikul, K., Rosarpitak, V., and Sombatsompop, N. (2011). "Structural and thermal stabilizations of PVC and wood/PVC composites by metal stearates and organotin," BioRes. 6(3), 3115-3131. PDF
Morrison, D., van Dyk, J. S., and Pletschke, B. I. (2011). "The effect of alcohols, lignin and phenolic compounds on the enzyme activity of Clostridium cellulovorans XynA," BioRes. 6(3), 3132-3141. PDF
Ravindran, C., Varatharajan, G. R., and Karthikeyan, A. (2011). "Role of alkaline-tolerant fungal cellulases in release of total antioxidants from agro-wastes under solid state fermentation," BioRes. 6(3), 3142-3154. PDF
Acharya, S. K., Mishra, P., and Mehar, S. K. (2011). "Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite," BioRes. 6(3), 3155-3165. PDF
Sönmez, A., Budakçı, M., and Pelit, H. (2011). "The effect of the moisture content of wood on the layer performance of water-borne varnishes," BioRes. 6(3), 3166-3177.
PDF
Ayrilmis, N. (2011). "Effect of fire retardants on surface roughness and wettability of wood plastic composite panels," BioRes. 6(3), 3178-3187. PDF
Cheng, F., and Hu, Y. (2011). "Reliability analysis of timber structure design of poplar lumber with nondestructive testing methods," BioRes. 6(3), 3188-3198. PDF
Tajdini, A., Tavakkoli, A., Jahan Latibari, A., Roohnia, M., and Tayeb, S. A. H. M. (2011). "Application of simultaneous equations model to estimate particleboard demand and supply," BioRes. 6(3), 3199-3209. PDF
Huang, H.-J., and Ramaswamy, S. (2011). "Thermodynamic analysis of black liquor steam gasification," BioRes. 6(3), 3210-3230. PDF
Eugenio, M. E., Hernández, M., Moya, R., Martín-Sampedro, R., Villar, J. C., and Arias, M. E. (2011). "Evaluation of a new laccase produced by Streptomyces ipomoea on biobleaching and ageing of kraft pulps," BioRes. 6(3), 3231-3241. PDF
Klasson, K. T., Uchimiya, M., Lima, I. M., and Boihem, Jr., L. L. (2011). "Feasibility of removing furfurals from sugar solutions using activated biochars made from agricultural residues," BioRes. 6(3), 3242-3251. PDF
Guo, H., Ma, A., Zhao, G., Yun, J., Liu, X., Zhang, H., and Zhuang, G. (2011). "Effects of farnesol on Penicillium decumbens's morphology and cellulase production," BioRes. 6(3), 3252-3259. PDF
Viet Cao, X., Ismail, H., Rashid, A. A., Takeichi, T., and Vo-Huu, T. (2011). "Mechanical properties and water absorption of kenaf powder filled recycled high density polyethylene/natural rubber biocomposites using MAPE as a compatibilizer," BioRes. 6(3), 3260-3271. PDF
Kilulya, K. F., Msagati, T. A. M., Mamba, B. B., Ngila, J. C., and Bush, T. (2011). "Imidazolium ionic liquids as dissolving solvents for chemical-grade cellulose in the determination of fatty acids using gas chromatography-mass spectrometry," BioRes. 6(3), 3272-3288. PDF
Hosseinihashemi, S. K., Modirzare, M., Safdari, V., and Kord, B. (2011). "Decay resistance, hardness, water absorption, and thickness swelling of a bagasse fiber/plastic composite," BioRes. 6(3), 3289-3299. PDF
Chen, X., Shen, W., Kou, S., and Liu, H. (2011). "GC-MS study of the removal of dissolved and colloidal substances in recycled papermaking by flocculation with nano-size TiO2 Colloids," BioRes. 6(3), 3300-3312. PDF
Samariha, A., and Khakifirooz, A. (2011). "Application of NSSC pulping to sugarcane bagasse," BioRes. 6(3), 3313-3323. PDF
Mahajan, G., and Sud, D. (2011). "Kinetics and equilibrium studies of Cr(VI) metal ion remediation by Arachis hypogea shells: A green approach," BioRes. 6(3), 3324-3338. PDF
Wang, W., Zhao, Z., Gao, Z., and Guo, M. (2011). "Whey protein-based water-resistant and environmentally safe adhesives for plywood," BioRes. 6(3), 3339-3351. PDF
Hein, P. R. G., and Brancheriau, L. (2011). "Radial variation of microfibril angle and wood density and their relationships in 14-year-old Eucalyptus urophylla S. t. Blake wood," BioRes. 6(3), 3352-3362. PDF
Olivella, M. À., Jové, P., Şen, A., Pereira, H., Villaescusa, I., and Fiol, N. (2011). "Sorption performance of Quercus cerris cork with polycyclic aromatic hydrocarbons and toxicity testing," BioRes. 6(3) 3363-3375. PDF
Neto, V. O. S., Oliveira, A. G., Teixeira, R. N. P., Silva, M. A. A., Freire, P. T. C., Keukeleire, D. D., and Nascimento, R. F. (2011). "Use of coconut bagasse as alternative adsorbent for separation of copper(II) ions from aqueous solutions: Isotherms, kinetics, and thermodynamic studies," BioRes. 6(3), 3376-3395. PDF
Wu, W.-B., Jing, Y., Gong, M.-R., Zhou, X.-F., and Dai, H.-Q. (2011). "Preparation and properties of magnetic cellulose fiber composites," BioRes. 6(3), 3396-3409. PDF
Chen, Y., Qian, X., and An, X. (2011). "Preparation and characterization of conductive paper via in situ polymerization of 3,4-ethylenedioxythiophene," BioRes. 6(3), 3410-3423. PDF
Tsoi, W.-Y. I., Kan, C.-W., and Yuan, C.-W. M. (2011). "Using ageing effect for hydrophobic modification of cotton fabric with atmospheric pressure plasma," BioRes. 6(3), 3424-3439. PDF
Zhong, W., Yu, H., Song, L., and Zhang, X. (2011). "Combined pretreatment with white-rot fungus and alkali at near room-temperature for improving saccharificaiton of corn stalks," BioRes. 6(3), 3440-3451. PDF
Buyukkileci, A. O., Tari, C., and Fernandez-Lahore, M. (2011). "Enhanced production of exo-polygalacturonase from agro-based products by Aspergillus sojae," BioRes. 6(3), 3452-3468. PDF
Liu, W., Yuan, Z., Mao, C., Hou, X., and Li, K. (2011). "Removal of hemicelluloses by NaOH pre-extraction from aspen chips prior to mechanical pulping," BioRes. 6(3), 3469-3480. PDF
Ferraz, J. M., Del Menezzi, C. H. S., Teixeira, D. E., and Martins, S. A. (2011). "Effects of treatment of coir fiber and cement/fiber ratio on properties of cement-bonded composites," BioRes. 6(3), 3481-3492. PDF
Wang, L., Sun, L., and Li, J. (2011). "Electroless copper plating of Fraxinus mandshurica veneer using glyoxylic acid as reducing agent," BioRes. 6(3), 3493-3504. PDF
Du, Y., Wang, Y., Peng, G.., Su, Z., Xu, M., Feng, W., Zhang, S., Ding, Y., Zhao, D., and Liu, P. (2011). "Reducing COD and BOD, as well as producing triacylglycerol by LDS5 grown in CTMP effluent," BioRes. 6(3), 3505-3514. PDF
Hu, L., Pan, H., Zhou, Y., and Zhang, M. (2011). "Methods to improve lignin's reactivity as a phenol substitute and as replacement for other phenolic compounds: A brief review," BioRes. 6(3), 3515-3525. PDF
Kumar, P., Negi, Y. S., and Singh, S. P. (2011). "Filler loading in the lumen or/and cell wall of fibers - A literature review," BioRes. 6(3), 3526-3546. PDF
Vishtal, A., and Kraslawski, A. (2011). "Challenges in industrial applications of technical lignins, BioRes. 6(3), 3547-3568. PDF
Li, B., Li, H., Zha, Q., Bandekar, R., Alsaggaf, A., and Ni, Y. (2011). "Review: Effects of wood quality and refining process on TMP pulp and paper quality," BioRes. 6(3), 3569-3584. PDF
Sasso, C., Beneventi, D., Zeno, E., Chaussy, D., Petit-Conil, M., and Belgacem, N. (2011). "Polypyrrole and polypyrrole/wood-derived materials conducting composites: A review," BioRes. 6(3), 3585-3620. PDF

Features of issue no. 6(2), May 2011:

Hill, C. A. S. (2011). "Wood modification: An update," BioRes. 6(2), 918-919.
Lundquist, K., and Parkås, J. (2011). "Different types of phenolic units in lignins," BioRes. 6(2), 920-926. PDF
Kord, B., and Kord, B. (2011). "Heavy metal levels in pine (Pinus eldarica Medw.) tree barks as indicators of atmospheric pollution," BioRes. 6(2), 927-935. PDF
Yu, X., Zhang, G., Xie, C., Yu, Y., Cheng, T., and Zhou, Q. (2011). "Equilibrium, kinetic, and thermodynamic studies of hazardous dye neutral red biosorption by spent corncob substrate," BioRes. 6(2), 936-949. PDF
Nosbi, N., Akil, H. M., Mohd Ishak, Z. A., and Abu Baker, A. (2011). "Behavior of kenaf fibers after immersion in several water conditions," BioRes. 6(2), 950-960. PDF
Pervaiz, M., and Sain, M. (2011). "Protein extraction from secondary sludge of paper mill wastewater and its utilization as a wood adhesive," BioRes. 6(2), 961-970. PDF
García, J. C., Zamudio, M. A. M., Pérez, A., Feria, M. J., Gomide, J. L., Colodette, J. L., and López, F. (2011). "Soda-AQ pulping of Paulownia wood after hydrolysis treatment," BioRes. 6(2), 971-986. PDF
Dogu, D., Kose, C., Kartal, S. N., and Erdin, N. (2011). "Wood identification of wooden marine piles from the ancient Byzantine port of Eleutherius/ Theodosius," BioRes. 6(2), 987-1018. PDF
Lal, M., Dutt, D., Tyagi, C. H., Kaur, H., and Kumar, A. (2011). "Bio-conventional bleaching of kraft-AQ pulp of A. cadamba by crude xylanases from Coprinellus disseminatus MLK-03 and effect of residual enzyme on effluent load," BioRes. 6(2), 1019-1028. PDF
Guo, W.-J., Wang, Y., Huang, M-Z., Wan, J.-Q., and Ma, Y.-W. (2011). "An investigation of the variation of pore structure in Eucalyptus fibre during recycling," BioRes. 6(2), 1029-1042. PDF
Abdul Khalil, H. P. S., Jawaid, M., and Abu Bakar, A. (2011). "Woven hybrid composites: Water absorption and thickness swelling behaviors," BioRes. 6(2), 1043-1052. PDF
Meza, P. R., Felissia, F. E., and Area, M. C. (2011). "Reduction of the recalcitrant COD of high yield pulp mills effluents by AOP. Part 1. Combination of ozone and activated sludge," BioRes. 6(2), 1053-1068. PDF
Tang, J., Chen, K., Xu, J., Li, J., and Zhao, C. (2011). "Effects of dilute acid hydrolysis on composition and structure of cellulose in Eulaliopsis binata," BioRes. 6(2), 1069-1078. PDF
Liu, J.-Y., Wu, S.-B., and Lou, R. (2011). "Chemical structure and pyrolysis response of beta-O-4 lignin model polymer," BioRes. 6(2), 1079-1093. PDF
Leponiemi, A., Johansson, A., and Sipilä, K. (2011). "Assessment of combined straw pulp and energy production," BioRes. 6(2), 1094-1104. PDF
van de Pas, D., Hickson, A., Donaldson, L, Lloyd-Jones, G., Tamminen, T., Fernyhough, A., and Mattinen, M.-L. (2011). "Characterization of fractionated lignins polymerized by fungal laccases," BioRes. 6(2), 1105-1121. PDF
Abdul Khalil, H. P. S., and Suraya, N. L. (2011). "Anhydride modification of cultivated kenaf bast fibers: Morphological, spectroscopic, and thermal studies," BioRes. 6(2), 1122-1135. PDF
Qin, Z.-Y., Tong, G.-L., Chin, Y. C. F., and Zhou, J.-C. (2011). "Preparation of ultrasonic-assisted high carboxylate content cellulose nanocrystals by TEMPO oxidation," BioRes. 6(2), 1136-1146. PDF
Kargarfard, A., and Jahan-Latibari, A. (2011). "The performance of corn and cotton stalks for medium density fiberboard production," BioRes. 6(2), 1147-1157. PDF
Vallejos, M. E., Felissia, F. E., Curvelo, A. A. S., Zambon, M. D., Ramos, L., and Area, M. C. (2011). "Chemical and physico-chemical characterization of lignins obtained from ethanol-water fractionation of bagasse," BioRes. 6(2), 1158-1171. PDF
Saadat-Nia, M. A., Brancheriau, L., Gallet, P., Enayati, A. A., Pourtahmasi, K., and Honarvar, F. (2011). "Ultrasonic wave parameter changes during propagation through poplar and spruce reaction wood," BioRes. 6(2), 1172-1185. PDF
Jia, N., Li, S.-M., Ma, M.-G., Zhu, J.-F., and Sun, R.-C. (2011). "Synthesis and characterization of cellulose-silica composite fiber in ethanol/water mixed solvents," BioRes. 6(2), 1186-1195. PDF
Zhou, Q., Cai, Y., Xu, Y., and Zhang, X. (2011). "Determination of moisture diffusion coefficient of larch board with finite difference method," BioRes. 6(2), 1196-1203. PDF
Pierre, F., Almeida, G., Brito, J. O., and Perré, P. (2011). "Influence of torrefaction on some chemical and energy properties of maritime pine and pedunculate oak," BioRes. 6(2), 1204-1218. PDF
Blanchard, V., and Blanchet, P. (2011). "Color stability for wood products during use: Effects of inorganic nanoparticles," BioRes. 6(2), 1219-1229. PDF
Liu, Y., Chen, K., Luo, K., Li, J., Mo, L., and Xu, J. (2011). "Using Mg(OH)2 in peroxide bleaching of wheat straw soda-AQ pulp," BioRes. 6(2), 1230-1241. PDF
Janardhnan, S., and Sain, M. (2011). "Targeted disruption of hydroxyl chemistry and crystallinity in natural fibers for the isolation of cellulose nano-fibers via enzymatic treatment," BioRes. 6(2), 1242-1250. PDF
Guo, S., Liu, Z., Hui, L.-F., Si, C.-L., and Pang, J.-J. (2011). "Application of polyoxometalate in hydrogen peroxide bleaching under acidic conditions," BioRes. 6(2), 1251-1261. PDF
Chen, F., Xu, M., Wang, L., and Li, J. (2011). "Preparation and characterization of organic aerogels from a lignin - resourcinol - formaldehyde copolymer," BioRes. 6(2), 1262-1272. PDF
Iqbal, H. M. N., Asgher, M., and Bhatti, H. N. (2011). "Optimization of physical and nutritional factors for synthesis of lignin degrading enzymes by a novel strain of Trametes vericolor," BioRes. 6(2), 1273-1287. PDF
Bhat, A. H., and Abdul Khalil, H. P. S. (2011). "Exploring 'nano filler' based on oil palm ash in polypropylene composites," BioRes. 6(2), 1288-1297. PDF
Ferrer, A., Rosal, A., Valls, C., Roncero, B., and Rodríguez, A. (2011). "Modeling hydrogen peroxide bleaching of soda pulp from oil-palm empty fruit bunches," BioRes. 6(2), 1298-1307. PDF
Aydemir, D., Gunduz, G., Altuntaş, E., Ertas, M., Şahin, H. T., and Hakki Alma, M. (2011). "Investigating changes in the chemical consitutents and dimensional stability of heat-treated hornbeam and uludag fir wood," BioRes. 6(2), 1308-1321. PDF
Tolba, R.., Wu, G., and Chen, A. (2011). "Adsorption of dietary oils onto lignin for promising pharameutical and nutritional applications," BioRes. 6(2), 1322-1335. PDF
Nyman, K., and Hakala, T. (2011). "Decolorization of inkjet ink and deinking of inkjet-printed paper with laccase-mediator system," BioRes. 6(2), 1336-1350. PDF
Kord, B. (2011). "Nanofiller reinforcement effects on the thermal, dynamic mechanical, and morphological behavior of HDPE/rice husk flour composites," BioRes. 6(2), 1351-1358. PDF
Basta, A. H., Sefain, M. Z., and El-Rewainy, I. (2011). "Role of some treatments on enhancing the eco-friendly utilization of lignocellulosic wastes in production of cement-fiber bricks," BioRes. 6(2), 1359-1375. PDF
Kaur, H., Dutt, D., and Tyagi, C. H. (2011). "Production of novel alkali-thermo-tolerant cellulase-poor xylanases from Coprinopsis cinerea HK-1 NFCCI-2032," BioRes. 6(2), 1376-1391. PDF
Wang, X., Chang, P. R., Li, Z., Wang, H., Liang, H., Cao, X., and Chen, Y. (2011). "Chitosan-coated cellulose/soy protein membranes with improved physical properties and hemocompatibility," BioRes. 6(2), 1392-1413. PDF
Yang, J., Wang, G., Qi, L., and Xu, J. (2011). "Optimizing sulfite pretreatment for saccharification of wheat straw using orthogonal design," BioRes. 6(2), 1414-1427. PDF
Ma, X., Huang, L., Chen, Y., Cao, S., and Chen, L. (2011). "Preparation of bamboo dissolving pulp for textile production. Part 1. Study on prehydrolysis of green bamboo for producing dissolving pulp," BioRes. 6(2), 1428-1439. PDF
Luduena, L., Fasce, D., Alvarez, V. A., and Stefani, P. M. (2011). "Nanocellulose from rice husk following alkaline treatment to remove silica," BioRes. 6(2), 1440-1453. PDF
Lam, Y. L., Kan, C. W., and Yuen, C. W. (2011). "Effect of oxygen plasma pretreatment and titanium dioxide overlay coating on flame retardant finished cotton fabrics," BioRes. 6(2), 1454-1474. PDF
Zabihzadeh, S. M., Omidvar, A., Marandi, M. A. B., Dastoorian, F., and Mirmehdi, S. M. (2011). "Effect of filler loading on physical and flexural properties of rapeseed stem/PP composites," BioRes. 6(2), 1475-1483. PDF
Liang, C., Zhan, H., Li, B., and Fu, S. (2011). "Characterization of bamboo SCMP alkaline extractives and the effects of peroxide bleaching," BioRes. 6(2), 1484-1494. PDF
Dutt, D., Jain, R. K., Maheshwari, A., and Kaur, H. (2011). "Cost reduction studies of decorative laminates," BioRes. 6(2), 1495-1504. PDF
Verma, N., Bansal, M. C., and Kumar, V. (2011). "Pea peel waste: A lignocellulosic waste and its utility in cellulase production by Tricoderma reesei under solid state cultivation," BioRes. 1505-1519. PDF
Akalin, M. K., and Karagöz, S. (2011). "Pyrolysis of tobacco residue: Part 1. Thermal," BioRes. 6(2), 1520-1531. PDF
Li, J., Li, S., Wang, H., Yang, Y., and Guo, G. (2011). "Preparation of a lignin-based composite and its properties," BioRes. 6(2), 1532-1542. PDF
Gunduz, G., Aydemir, D., Onat, S. M., and Akgun, K. (2011). "The effects of tannin and thermal treatment on physical and mechanical properties of laminated chestnut wood composites," BioRes. 6(2), 1543-1555. PDF
Ghosh, M. K., and Ghosh, U. K. (2011). "Utilization of pine needles as bed material in solid state fermentation for production of lactic acid by Lactobacillus strains," BioRes. 6(2), 1556-1575. PDF
Xiao, L.-P., Sun, Z.-J., Shi, Z.-J., Xu, F., and Sun, R.-C. (2011). "Impact of hot compressed water pretreatment on the structural changes of woody biomass for bioethanol production," BioRes. 6(2), 1576-1598. PDF
Gonzalez, R., Jameel, H., Chang, H.-M., Treasure, T., Pirraglia, A., and Saloni, D. (2011). "Thermo-mechanical pulping as a pretreatment for agricultural biomass as biochemical conversion," BioRes. 6(2), 1599-1614. PDF
Wan, J., Yang, J., Ma, Y., and Wang, Y. (2011). "Effects of pulp preparation and papermaking processes on the properties of OCC fibers," BioRes. 6(2), 1615-1630. PDF
Hrabalova, M., Schwanninger, M., Wimmer, R., Gregorova, A., Zimmermann, T., and Mundigler, N. (2011). "Effects on thermal, morphological, and viscoelastic properties of poly(vinylalcohol)/fibre composites," BioRes. 6(2), 1631-1647. PDF
Çakıcıer, N., Korkut, S., and Korkut, D. S. (2011). "Varnish layer hardness, scratch resistance, and glossiness of various wood species as affected by heat treatment," BioRes. 6(2), 1648-1658. PDF
Vilaseca, F., Puig, J., Pèlach, M. À., El Mansouri, N.-E., Alcalà, M., Roux, J.-C., and Mutjé, P. (2011). "Study and modeling of the disintegration kinetics of coated paper," BioRes. 6(2), 1659-1669. PDF
Li, S., Gao, Y., Bai, H., Zhang, L., Qu, P., and Bai, L. (2011). "Preparation and characteristics of polysulfone dialysis composite membranes modified with nanocrystalline cellulose," BioRes. 6(2), 1670-1680. PDF
Li, H., Liu, H., Fu, S., and Zhan, H. (2011). "Surface hydrophobicity modification of cellulose fibers by layer-by-layer self-assembly of lignosulfonates," BioRes. 6(2), 1681-1695. PDF
Shahriarinour, M., Wahab, M. N. A., Mohamad, R., Mustafa, S., and Ariff, A. B. (2011). "Cyanobacterial biomass as N-supplement to oil palm empty fruit bunch (OPEFB) fibre for improvement of cellulase production by Aspergillus terreus in submerged fermentation," BioRes. 6(2), 1696-1706. PDF
Saeed, A., Fatehi, P., Ni, Y., and van Heiningen, A. (2011). "Impact of furfural on the sugar analysis of prehydrolysis liquor of kraft-based dissolving pulp production process using the HPAEC technique," BioRes. 6(2), 1707-1718. PDF
Wanrosli, W. D., Kassim, H. H. M., and Seeni, A. (2011). "Cellulose phosphate from oil palm biomass as potential biomaterials," BioRes. 6(2), 1719-1740. PDF
Kord, B., and Hosseini Kiakojouri, S. M. (2011). "Effect of nanoclay dispersion on physical and mechanical properties of wood flour/ polypropylene/ glass fiber hybrid composites," BioRes. 6(2), 1741-1751. PDF
Bhat, I. H., Mustafa, M. T. B., Mohmod, A. L., and Abdul Khalil, H. P. S. (2011). "Spectroscopic, thermal, and anatomical characterization of cultivated bamboo (Gigantochloa spp.)," BioRes. 6(2), 1752-1763. PDF
Dai, Z., Court, G., Li, Z., and Ni, Y. (2011). "Effect of polymers and metal ions on the behavior of pitch from a spruce TMP-based specialty paper mill based on DSC and confocal LSM analysis," BioRes. 6(2), 1764-1772. PDF
Akalın, M. K., and Karagöz, S. (2011). "Pyrolysis of tobacco residue. Part 2: Catalytic," BioRes. 6(2), 1773-1805. PDF
Jové, P., Olivella, M. À., and Cano, L. (2011). "Study of the variability in chemical composition of bark layers of Quercus suber L. from different production areas," BioRes. 6(2), 1806-1815. PDF
Belini, U. L., Hein, P. R. G., Filho, M. T., Rodrigues, J. C., and Chaix, G. (2011). "Near infrared spectroscopy for estimating sugarcane bagasse content in medium density fiberboard," BioRes. 6(2), 1816-1829. PDF
Sánchez, C., Egüés, I., Llano-Ponte, R., and Labidi, J. (2011). "Acid- and base-catalized hydrolysis of corn stalk," BioRes. 6(2), 1830-1842. PDF
Hosseini Hashemi, S. K., and Kord, B. (2011). "Variation of within-stem biometrical and physical property indices of wood from Cupressus sempervirons L.," BioRes. 6(2), 1843-1857. PDF
Wang, Z., Lin, W., and Song, W. (2011). "Mechanistic study of the conversion from DMDFC to DOHE in the levulinic acid formation process by theoretical approaches," BioRes. 6(2), 1858-1867. PDF
Wang, Q., Chen, K., Li, J., Xu, J., and Liu, S. (2011). "Simultaneous determination of chlorine dioxide and hypochlorous acid in bleaching system," BioRes. 6(2), 1868-1879. PDF
Ding, T., Gu, L., and Liu, X. (2011). "Influence of steam pressure on chemical changes of heat-treated Mongolian pine wood," BioRes. 6(2), 1880-1889. PDF
Borrega, M., Nieminen, K., and Sixta, H. (2011). "Effects of hot water extraction in a batch reactor on the delignification of birch wood," BioRes. 6(2), 1890-1903. PDF
Ben Marzoug, I. B., Allègue, L., Sakli, F., and Roudesli, S. (2011). "Acid, acrylamide and zeolite modification of cellulosic esparto fibers for dyes decolourisation," BioRes. 6(2), 1904-1915. PDF
Gao, Y., Qin, M., Li, C., Yu, H., and Zhang, F. (2011). "Control of sticky contaminants with cationic talc in deinked pulp," BioRes. 6(2), 1916-1925. PDF
Wang, X.-Q., and Zhou, X.-F. (2011). "Novel starch solution prepared from the starch and NaOH/ thiourea/ urea aqueous solution and its application as surface sizing agent," BioRes. 6(2), 1926-1938. PDF
Han, M., Choi, G.-W., Kim, Y., and Koo, B.-C. (2011). "Bioethanol production by Miscanthus as a lignocellulosic biomass: Focus on high efficiency conversion to glucose and ethanol," BioRes. 6(2), 1939-1953. PDF
Karaoğlu, M. H., Uğurlu, M., and Kula, İ. (2011). "Adsorption characterization of Co(II) ions onto chemically treated Quercus coccifera shell: Equilibrium, kinetic, and thermodynamic studies," BioRes. 6(2), 1954-1971. PDF
Li, G., and Liu, W. (2011). "Adsorption of pitch and stickies on magnesium aluminum hydroxides treated at different temperatures," BioRes. 6(2), 1972-1987. PDF
Mohkami, M., and Talaeipour, M. (2011). "Investigation of the chemical structure of carboxylated and carboxymethylated fibers from waste paper via XRD and FTIR analysis," BioRes. 6(2), 1988-2003. PDF
Zambare, V. P., Zambare, A. V., Muthukumarappan, K., and Christopher, L. P. (2011). "Potential of thermostable cellulases in the bioprocessing of switchgrass to ethanol," BioRes. 6(2), 2004-2021. PDF
Yue, X., Chen, F., and Zhou, X. (2011). "Improved interfacial bonding of PVC/wood-flour composites by lignin amine modification," BioRes. 6(2), 2022-2034. PDF
Wang, L., and Liu, H. (2011). "Electroless nickel plating on chitosan-modified wood veneer," BioRes. 6(2), 2035-2044. PDF
Köse, C., Terzi, E., Büyüksarı, Ü, Avci, E., Ayrılmış, N., Kartal, S. N., and Imamura, Y. (2011). "Particleboard and MDF panels made from a mixture of wood and pinecones: Resistance to decay fungi and termites under laboratory conditions," BioRes. 6(2), 2045-2054. PDF
Roohnia, M., Hashemi-dizaji, S.-F., Brancheriau, L., Tajdini, A., Hemmasi, A.-H., and Manouchehri, N. (2011). "Effect of soaking process in water on the acoustical quality of wood for traditional musical instruments," BioRes. 6(2), 2055-2065. PDF
Khisti, U., Bastawde, K. B., and Gokhale, D. V. (2011). "Hyper-production of beta-glucosidase and beta-xylosidase by Aspergillus niger NCIM 1207 in xylan-containing media," BioRes. 6(2), 2066-2076. PDF
Area, M. C., Felissia, F. E., Carvalho, M. G. V. S., Ferreira, P. J., Barboza, O. M., and Bengoechea, D. I. (2011). "Caracterization of Eucalyptus grandis kraft pulps treated with phosphontates in different stages of TCF bleaching," BioRes. 6(2), 2077-2090. PDF
Sun, F., Zhou, Y, Bao, B., Chen., A., and Du, C. (2011). "Influence of solvent treatment on mould resistance of bamboo," BioRes. 6(2), 2091-2100. PDF
Singha, A. S., Kaith, B. S., and Khanna, A. J. (2011). "Synthesis and characterization of Cannabis indica fiber reinforced composites," BioRes. 6(2), 2101-2117. PDF
Gündüz, G., Yapıcı, F., Özçifçi, A., and Kalaycıoğlu, H. (2011). "The effects of adhesive ratio and pressure time on some properties of oriented strand board," BioRes. 6(2), 2118-2124. PDF
Horvath, B., Peralta, P., Frazier, C., and Peszlen, I. (2011). "Thermal softening of transgenic aspen," BioRes. 6(2), 2125-2134. PDF
de Palacios, P., Esteban, L. G., García Fernández, F., García-Iruela, A., González-Adrados, J. R., and Conde, M. (2011). "Comparative study of the 35 oC sorption Isotherms of cork stripped from the tree in 1968 and 2006," BioRes. 6(2), 2135-2144. PDF
Kiuru, J., Sievänen, J., Tsitko, I., Pajari, H., and Tukiainen, P. (2011). "A new dual biocide concept for fine papermaking," BioRes. 6(2), 2145-2160. PDF
Hubbe, M. A., Hasan, S. H., and Ducoste, J. J. (2011). "Cellulosic substrates for removal of pollutants from aqueous systems: A review. 1. Metals," BioRes. 6(2), 2161-2287. PDF

Features of issue no. 6(1), Feb. 2011:

Wang, Q., Wu, Y., and Zhu, S. (2011). "Use of ionic liquids for improvement of cellulosic ethanol production," BioRes. 6(1), 1-2.
Sánchez, R., Ferrer, A., Serrano, L., Toledano, A., Labidi, J., and Rodríguez, A. (2011). "Hesperaloe funifera as a raw material for integral utilization of its components," BioRes. 6(1), 3-21. PDF
Mahdavi, M., Ahmad, M. B., Haron, M. J., and Rahman, M. Z. A. (2011). "Adsorption of Cr(III) from aqueous solutions by polyacrylamide-grafted rubberwood fibre: Kinetics, equilibrium, and thermodynamic studies," BioRes. 6(1), 22-33. PDF
Badger, P., Badger, S., Puettmann, M., Steele, P., and Cooper, J. (2011). "Techno-economic analysis: Preliminary assessment of pyrolysis oil production costs and material energy balance associated with a transportable fast pyrolysis system," BioRes. 6(1), 34-47. PDF
Jahan Latibari, A., Hossein, M. A., and Hosseinpour, R. (2011). "Application of alkaline sulfite pulping on corn stalks," BioRes. 6(1), 48-58. PDF
Hosseini Hashemi, S. K., and Jahan Latibari, A. (2011). "Evaluation and identification of walnut heartwood extractives for protection of poplar wood," BioRes. 6(1), 59-69. PDF
Jia, B., Su, L., Han, G., Wang, G., Zhang, J., and Wang, L. (2011). "Adsorption properties of nickel-based magnetic activated carbon prepared by Pd-free electroless plating," BioRes. 6(1), 70-80. PDF
Belhassen, R., Vilaseca, F., Mutjé, P., and Boufi, S. (2011). "Preparation and properties of starch-based biopolymers modified with difunctional isocyanates," BioRes. 6(1), 81-102. PDF
Kaur, H., Dutt, D., and Tyagi, C. H. (2011). "Optimization of soda pulping process of ligno-cellulosic residues of lemon and sofia grasses produced after steam distillation," BioRes. 6(1), 103-120. PDF
Mishra, S. P., Thirree, J., Manent, A.-S., Chabot, B., and Daneault, C. (2011). "Ultrasound-catalyzed TEMPO-mediated oxidation of native cellulose for the production of nanocellulose: Effect of process variables," BioRes. 6(1), 121-143. PDF
Gao, W.-H., Chen, K.-F., Yang, R.-D., Yang, F., and Han, W.-J. (2011). "Properties of bacterial cellulose and its influence on the physical properties of paper," BioRes. 6(1), 144-153. PDF
Singh, S., Dutt, D., and Tyagi, C. H. (2011). "Complete characterization of wheat straw (Triticum aestivum PBW-343 L. Emend. Fiori & Paul.) - A renewable source of fibers for pulp and paper making," BioRes. 6(1), 154-177. PDF
Ioelovich, M., and Leykin, A. (2011). "Study of sorption properties of cellulose and its derivatives," BioRes. 6(1), 178-195. PDF
Cheng, H., Zhan, H., Fu, S., and Lucia, L. A. (2011). "Alkali extraction of hemicellulose from depithed corn stover and effects on soda-AQ pulping," BioRes. 6(1), 196-206. PDF
Kumar, P., Negi, Y. S., and Singh, S. P. (2011). "Offset printing behavior of baggase and hardwood paper sheets loaded by in-situ precipitation," BioRes. 6(1), 207-218. PDF
Lyytikäinen, K., Saukkonen, E., Kajanto, I., and Käyhkö, J. (2011). "The effect of hemicellulose extraction on fiber charge properties and retention behavior of kraft pulp fibers," BioRes. 6(1), 219-231. PDF
Si, C.-L., Lu, Y.-Y., Zhang, Y., Xu, J., Qin, P.-P., Sun, R.-C., and Ni., Y.-H. (2011). "Antioxidative low molecular weight extractives from triploid Populus tomentosa xylem," BioRes. 6(1), 232-242. PDF
Kang, S., Li, B., Chang, J., and Fan, J. (2011). "Antioxidant abilities comparison of lignins with their hydrothermal liquefaction products," BioRes. 6(1), 243-252. PDF
Zhou, X., Tan, L, Zhang, W., Lv, C., Zheng, F., Zhang, R., Du, G., Tang, B., and Liu, X. (2011). "Enzymatic hydrolysis lignin derived from corn stover as an intrinsic binder for bio-composites manufacture: Effect of fiber moisture content and pressing temperature on boards' properties," BioRes. 6(1), 253-264. PDF
Khiari, R., Mauret, E., Belgacem, M. N., and Mhemmi, F. (2011). "Tunisian date palm rachis used as an alternative source of fibres for papermaking applications," BioRes. 6(1), 265-281. PDF
Díaz, R., Alonso, S., Sánchez, C., Tomasini, A., Bibbins-Martínez, M., and Díaz-Godínez, G. (2011). "Characterization of the growth and laccase activity of strains of Pleurotus ostreatus in submerged fermentation," BioRes. 6(1), 282-290. PDF
Shahriarinour, M., Wahab, M. N. A., Mustafa, S., Mohamad, R., and Ariff, A. B. (2011). "Effect of various pretreatments of oil palm empty fruit bunch fibres for subsequent use as substrate on the performance of cellulase production by Aspergillus terreus," BioRes. 6(1), 291-307. PDF
Candan, Z., Ayrilmis, N., and Akbulut, T. (2011). "Dimensional stability performance of fire retardant treated veneer-oriented strandboard composites," BioRes. 6(1), 308-316. PDF
Sun, R., Song, X., Sun, R., and Jiang, J. (2011). "Effect of lignin content on enzymatic hydrolysis of furfural residues," BioRes. 6(1), 317-328. PDF
Young, T. M., Zaretski, R. L., Perdue, J. H., Guess, F. M., and Liu, X. (2011). "Logistic regression models of factors influencing the location of bioenergy and biofuels plants," BioRes. 6(1), 329-343. PDF
Vargas Radillo, J. J., Ruiz-López, M. A., Rodríguez Macías, R., Barrientos Ramírez, L., García-López, P. M., and López-Dellamary Toral, F. A. (2011). "Fermentable sugars from lupinus rotundiflorus biomass by concentrated hydrochloric acid hydrolysis,"BioRes. 6(1), 344-355. PDF
Karlsson, O., Sidorova, E., and Morén, T. (2011). "Influence of heat transferring media on durability of thermally modified wood," BioRes. 6(1), 356-372. PDF

Fang. C.-H., Cloutier, A., Blanchet, P., Koubaa, A., and Mariotti, N. (2011). "Densification of wood veneers combined with oil-heat treatment. Part 1: Dimensional stability," BioRes. 6(1), 373-385.

PDF
Roohnia, M., Hossein, M.-A., Alavi-Tabar, S.-E., Tajdini, A., Jahan-Latibari, A., and Manouchehri, N. (2011). "Acoustic properties in Arizona cypress logs: A tool to select wood for sounding board," BioRes. 6(1), 386-399. PDF
Spiridon, I., Teacă, C.-A., and Bodîrlău, R. (2011). "Structural changes evidenced by FTIR spectroscopy in cellulosic materials after pre-treatment with ionic liquid and enzymatic hydrolysis," BioRes. 6(1), 400-413. PDF
Yuan, T.-Q., Sun, S., Xu, F., and Sun, R.-C. (2011). "Isolation and physico-chemical characterization of lignins from ultrasound irradiated fast-growing poplar wood," BioRes. 6(1), 414-433. PDF
Miklečić, J., Jirouš-Rajković, V., Antonović, A., and Španić, N. (2011). "Discolouration of thermally modified wood during simulated indoor sunlight exposure," BioRes. 6(1), 434-446. PDF
Pathak, P., Bhardwaj, N. K., and Singh, A. K. (2011). "Optimization of chemical and enzymatic deinking of photocopier waste paper," BioRes. 6(1), 447-463. PDF
Zhang, Y., Gu, J., Tan, H., Di, M., Zhu, L, and Weng, X. (2011). "Straw based particleboard bonded with composite adhesives," BioRes. 6(1), 464-476. PDF
García-Ortuño, T., Andréu-Rodríguez, J., Ferrández-García, M. T., Ferrández-Villena, M.., and Ferrández-García, C. E. (2011). "Evaluation of the physical and mechanical properties of particleboard made from giant reed (Arundo donax L.)," BioRes. 6(1), 477-486. PDF
Frone, A. N., Panaitescu, D. M., Donescu, D., Spataru, C. I., Radovici, C., Trusca, R., and Somoghi, R. (2011). "Preparation and characterisization of PVA composites with cellulose nanofibers obtained by ultrasonication," BioRes. 6(1), 487-512. PDF
Martin-Sampedro, R., Eugenio, M. E., Revilla, E., Martín, J. A., and Villar, J. C. (2011). "Integration of kraft pulping on a forest biorefinery by the addition of a steam explosion pretreatment," BioRes. 6(1), 513-528. PDF
Ogundiran, M. B., Babayemi, J. O., and Nzeribe, C. G. (2011). "Determination of metal content and an assessment of the potential use of waste cashew nut ash (CNSA) as a source for potash production," BioRes.6(1), 529-536. PDF
Munusamy, K., Somani, R. S., and Bajaj, H. C. (2011). "Tamarind seeds carbon: Preparation and methane uptake," BioRes. 6(1), 537-551. PDF
Bansal, N., Tewari, R., Gupta, J. K., Soni, R., and Soni, S. K. (2011). "A novel strain of Aspergillus niger producing a cocktail of hydrolytic depolymerising enzymes for the production of second generation biofuels," BioRes. 6(1), 552-569. PDF
Mocchiutti, P., Galván, M. V., Inalbon, M. C., and Zanuttini, M. A. (2011). "Improvement of paper properties of recycled unbleached softwood kraft pulps by poly(allylamine hydrochloride), BioRes. 6(1), 570-583. PDF
Kord, B., Ismaeilimoghadam, S., and Malekian, B. (2011). "Effect of immersion temperature on the water uptake of polypropylene/ wood flour/ organoclay hybrid nanocoposite," BioRes. 6(1), 584-593. PDF
Zeng, J.-S., Chen, K.-F., and Li, J. (2011). "Study of the bulk density of high consistency pulp and engineering application in the bleaching tower," BioRes. 6(1), 594-605. PDF
Wang, J., Li, J., Li, S., Freitang, C., and Morrell, J. J. (2011). "Antifungal activities of Cunninghamia lanceolata heartwood extractives," BioRes. 6(1), 606-614. PDF
Niu, M., Zhao, G.-J., and Alma, M. H. (2011). "Thermogravimetric studies on condensed wood residues in polyhydric alcohols liquefaction," BioRes. 6(1), 615-630. PDF
Sun, Y., Lin, C.-X., Liu, M.-H., and Liu, Y.-F. (2011). "Equilibrium adsorption behaviors and kinetic characteristics of oxymatrine on a spherical cellulose adsorbert," BioRes. 6(1), 631-640. PDF
Rusu, M., Mörseburg, K., Gregersen, Ø., Yamakawa, A., and Liukkonen, S. (2011). "Relation between fibre flexibility and cross-sectional properties," BioRes. 641-655. PDF
Sang, Y., McQuaid, M., and Englezos, P. (2011). "Optimization of chemical use for highly filled mechanical grade papers with precipitated calcium carbonate," BioRes. 656-671. PDF
Laitinen, O., Kemppainen, K., Stoor, T., and Niinimäki, J. (2011). "Fractionation of pulp and paper particles selectively by size," BioRes. 6(1), 672-685. PDF
Gong, Y., Lin , L., and Yan, Z. (2011). "Catalytic hydrogenation and oxidation of biomass-derived levulinic acid," BioRes. 6(1), 686-699. PDF
Shnawa, H. A., Muhsen, M. G., Aldaeem, D. A., Ibraheem, I. K., Gumaa, F. M., and Saleh A. I. (2011). "Synthesis of barium tannate from eucalyptus bark and its use as a thermal stabilizer for poly(vinyl chloride)," BioRes. 6(1), 700-706. PDF
Xu, J., Chen, Y., Cheng, J. J., Sharma-Shivappa, R. R., and Burns, J. C. (2011). "Delignification of switchgrass cultivars for bioethanol production," BioRes. 6(1), 707-720. PDF
Li, L., Lee, S., Lee, H. L., and Youn, H. J. (2011). "Hydrogen peroxide bleaching of hardwood kraft pulp with adsorbed birch xylan and its effect on paper properties," BioRes. 6(1), 721-736. PDF
Islam, M. S., Hamdan, S., Rahman, M. R., Jusoh, I., Ahmed, A. S., and Idrus, M. (2011). "Dynamic Young's modulus, morphological, and thermal stability of 5 tropical light hardwoods modified by benzene diazonium salt treatment," BioRes. 6(1), 737-750. PDF
Udohitinah, J. S., and Oluwadare, A. O. (2011). "Pulping properties of kraft pulp of Nigerian-grown kenaf (Hibiscus cannabinus L.)," BioRes. 6(1), 751-761. PDF
Karunanithy, C., and Muthukumarappan, K. (2011). "Optimization of alkali, big bluestem particle size, and extruder parameters for maxium enzymatic sugar recovery using response surface methodology," BioRes. 6(1), 762-790. PDF
Vishtal, A., Rousu, P., Hultholm, T., Turku, K., Paananen, P., and Käyhkö, J. (2011). "Drainage and retention enhancement of a wheat straw-containing pulp furnish using microparticle retention aids," BioRes. 6(1), 791-806. PDF
Via, B. K., Fasina, O., and Pan, H. (2011). "Assessment of pine biomass density through mid-infrared spectroscopy and multivariate modeling," BioRes. 6(1), 807-822. PDF
Bose, S. K., Leavitt, A., Stromberg, B., Kanungo, D., and Francis, R. C. (2011). "Inclusion of a pressurized acidolysis stage in chemical pulp bleaching," BioRes. 6(1), 823-840. PDF
Farsheh, A. T., Talaeipour, M., Hemmasi, A. H., Khademieslam, H., and Ghasemi, I. (2011). "Investigation on the mechanical and morphological properties of foamed nanocomposites based on wood flour/PVC/multi-walled carbon nanotube," BioRes. 6(1), 841-852. PDF
Ko, C.-H., Chen, F.-J., Liao, W.-J., and Shih, T.-L. (2011). "Impacts of lignin contents and yeast extract addition on the interaction between spruce pulps and crude recombinant Paenibacillus endoglucanase," BioRes. 6(1), 853-866. PDF
Pereira, P. H. F., Voorwald, H. J. C., Cioffi, M. O. H., and Da Silva, M. L. C. P. (2011). "Novel cellulose/ NbOPO4.nH2O hybrid material from sugarcane bagasse," BioRes. 6(1), 867-878. PDF
Shi, S., Shi, S. Q., Barnes, H. M., and Pittman, C. U., Jr. (2011). "A chemical process for preparing cellulosic fibers hierarchically from kenaf bast fibers," BioRes. 6(1), 879-890. PDF
Imani, R., Talaiepour, M., Dutta, J., Ghobadinezhad, M. R., Hemmasi, A. H., and Nazhad, M. M. (2011). "Production of antibacterial filter paper from wood cellulose," BioRes. 6(1), 891-900. PDF
Wan Daud, W. R., and Law, K.-N. (2011). "Oil palm fibers as papermaking material: Potentials and challenges," BioRes. 6(1),901-917. PDF

Features of issue no. 5(4), Nov. 2010:

Hubbe, M. A. (2010). "The implementation of findings published in scholarly articles," BioRes. 5(4), 2024-2025.
Shen, J., Song, Z., Qian, X., Liu, W., and Yang, F. (2010). "Fillers and the carbon footprint of papermaking," BioRes. 5(4), 2026-2028.
Gu, X., He, M., Shi, Y., and Li, Z. (2010). "Production of aromatic aldehyde by microwave catalytic oxidation of a lignin model compound with La-containing SBA-15/H2O2 systems," BioRes. 2029-2039.
Liu, H., and Wang, L. (2010). "Electroless nickel deposition on Fraxinum mandshurica veneer modified with APTHS for EMI shielding," BioRes. 5(4), 2040-2050. PDF
Lv., G.-J., Wu, S.-B., and Lou, R. (2010). "Characteristics of corn stalk hemicellulose pyrolysis in a tubular reactor," BioRes. 5(4), 2051-2062. PDF
Krongtaew, C., Messner, K., Ters, T., and Fackler, K. (2010). "Characterization of key parameters for biotechnological lignocellulose conversion assessed by FT-NIR spectroscopy. Part 1. Qualitative analysis of pretreated straw," BioRes. 5(4), 2063-2080. PDF
Krongtaew, C., Messner, K., Ters, T., and Fackler, K. (2010). "Characterization of key parameters for biotechnological lignocellulose conversion assessed by FT-NIR spectroscopy. Part 2. Quantitative analysis by partial least squares regression," BioRes. 5(4), 2081-2096. PDF
Shibata, S., Bozlur, R. M., Fukumoto, I., and Kanda, Y. (2010). "Effects of injection temperature on mechanical properties of bagasse/polypropylene injection molding composites," BioRes. 5(4), 2097-2111. PDF
Azizi Mossello, A., Harun, J., Resalati, H., Ibrahim, R., Shmas, S. R. F., and Tahir, P. M. (2010). "New approach to use of kenaf for paper and paperboard production," BioRes. 5(4), 2112-2122. PDF
Dutt, D., Upadhyaya, J. S., and Tyagi, C. H. (2010). "Studies on Hibiscus cannabinus, Hibiscus sabdariffa, and Cannabinus sativa pulp to be a substitute for softwood pulp - Part 1: AS-AQ delignification process," BioRes 5(4), 2123-2136. PDF
Dutt, D., Upadhyaya, J. S., and Tyagi, C. H. (2010). "Studies on Hibiscus cannabinus, Hibiscus sabdariffa, and Cannabinus sativa pulp to be a substitute for softwood pulp - Part 2: SAS-AQ and NSSC-AQ delignification processes," BioRes 5(4), 2137-2152. PDF
Haapala, A., Körkkö, M., Kemppainen, K., MacNeil, D., and Niinimäki, J. (2010). "Purification of white waters by selective flotation," BioRes. 5(4), 2153-2172. PDF
Asikainen, S., Furhmann, A., Ranua, M., and Robertsén, L. (2010). "Effect of birch kraft pulp primary fines on bleaching and sheet properties," BioRes. 5(4), 2173-2183. PDF
Lou, R., Wu, S.-B., Lv, G.-J., and Guo, D.-L. (2010). "Pyrolytic products from rice straw and enzymatic/mild acidolysis lignin (EMAL)," BioRes. 5(4), 2184-2194. PDF
Gu, R., Kokta, B. V., Frankenfeld, K., and Schlufter, K. (2010). "Bacterial cellulose reinforced thermoplastic composites: Preliminary evaluation of fabrication and performance," BioRes. 5(4), 2195-2207. PDF
Attiogbe, F. K., Bose, S. K., Wang, W., McNeillie, A., and Francis, R. C. (2010). "The peroxymonocarbonate anions as pulp bleaching agents. Part 1. Results with lignin model compounds and chemical pulps," BioRes. 5(4), 2208-2220. PDF
Attiogbe, F. K., Wang, W., McNeillie, A., and Francis, R. C. (2010). "The peroxymonocarbonate anions as pulp bleaching agents. Part 2. Mechanical pulp brightening and effects of metal ions," BioRes. 5(4), 2208-2220. PDF
Farahani, M. R. M., and Taghizadeh, F. (2010). "Roughness of esterified eastern cottonwood," BioRes. 5(4), 2232-2238. PDF
Leger, C. A.., Chan, F. D., and Scheider, M. C. (2010). "Fractionation and characterisation of technical ammonium lignosulfonate," BioRes. 5(4), 2239-2247. PDF
Jia, B., and Wang, L. (2010). "Preparation of microwave absorbing nickel-based activated carbon by electroless plating with palladium-free activation," BioRes. 5(4), 2248-2257. PDF
Ghasemi, S., Eshkiki, R. B., Fatehi, P., and Ni, Y. (2010). "Impact of acid washing and chelation on Mg(OH)2-based hydrogen peroxide bleaching of mixed hardwoods CMP at high consistency," BioRes. 5(4), 2258-2267. PDF
López, Y., García, A., Karimi, K., Taherzadeh, M. J., and Martín, C. (2010). "Chemical characterisation and dilute-acid hydrolysis of rice hulls from an artisan mill," BioRes. 5(4), 2268-2277. PDF
Khalil, H. P. S. A., Bhat, I.-u.-H., and Sartika, M. Y. (2010). "Degradation, mechanico-physical, and morphological properties of empty fruit bunch reinforced polyester composites," BioRes. 5(4), 2278-2296. PDF
Ladeira, N. C., Peixoto, V. J., Penha, M. P., Barros, E. B. P., and Leite, S. G. F. (2010). "Optimization of 6-pentyl-alpha-pyrone production by solid state fermentation using sugarcane bagasse as residue," BioRes. 5(4), 2297-2306. PDF
Fan, M. (2010). "Characterization and performance of elementary hemp fibres: Factors influencing tensile strength," BioRes. 5(4), 2307-2322. PDF
Qu, P., Tang, H., Gao, Y., Zhang, L.-P., and Wang, S. (2010). "Polyethersulfone composite membrane blended with cellulose fibrils," BioRes. 5(4), 2323-2336. PDF
Schwartz, T. J., and Lawoko, M. (2010). "Removal of acid-soluble lignin from biomass extracts using Amberlite XAD-4 Resin," BioRes. 5(4), 2337-2347. PDF
Sasso, C., Beneventi, D., Zeno, E., Chaussy, D., Petit-Conil, M., Nortier, P., and Belgacem, N. (2010). "Polypyrrole synthesis via carboxymethylcellulose-iron complexes," BioRes. 5(4), 2348-2361. PDF
Stajić, M., Kukavica, G., Vukojević, J., Simonić, J., Veljović-Jovanović, S., and Duletić-Laušević, S. (2010). "Wheat straw conversion by enzymatic system of Ganoderma lucidum," BioRes. 5(4), 2362-2373. PDF
Pirraglia, A., Gonzalez, R., and Saloni, D. (2010). "Techno-economical analysis of wood pellets production for U.S. manufacturers," BioRes. 5(4), 2374-2390. PDF
Mahdavi, S., Kermanian, H., and Varshoei, A. (2010). "Comparison of mechanical properties of date palm fiber-polyethyelene composite," BioRes. 5(4), 2391-2403 PDF
Kurian, J. K., Minu, A. K., Banerji, A., and Kishore, V. V. N. (2010). "Bioconversion of hemicellulose hydrolysate of sweet sorghum bagasse to ethanol by using Pichia stipitis NCIM 3497 and Debaryomyces hansenii sp.," BioRes. 5(4), 2404-2416. PDF
Ogunsile, B. O., and Quintana, G. C. (2010). "Modeling of soda-ethanol pulps from Carpolobia lutea, BioRes. 5(4), 2417-2430. PDF
Zhong, L., Fu, S., Li, F., and Zhan, H. (2010). "Chlorine dioxide treatment of sisal fibre: Surface lignin and its influences on fibre surface characteristics and interfacial behaviour of sisal fibre/phenolic resin composites," BioRes. 5(4), 2431-2446. PDF
Hu, J., Xu, G., Liu, J., Lei, T., and Shen, S. (2010). "Finite element modeling simulation in the straw pellet cold compressing molding process," BioRes. 5(4), 2447-2456. PDF
Hoseinpour, H., Karimi, K., Zilouei, H., and Taherzadeh, M. J. (2010). "Simultaneous pretreatment of lignocellulose and hydrolysis of starch in mixtures to sugars," BioRes. 5(4), 2457-2469. PDF
Rao, M., Varma, A. J., and Deshmukh, S. S. (2010). "Production of single cell protein, essential amino acids, and xylanase by Penicillium janthinellum," BioRes. 5(4), 2470-2477. PDF
Esmeraldo, M. A., Barreto, A. C. H., Freitas, J. E. B., Fechine, P. B. A., Sombra, A. S. B., Corradini, E., Mele, G., Maffezzoli, A., and Massetto, S. E. (2010). "Dwarf-gren coconut fibers: A versatile natural renewable raw bioresource. Treatment, morphology, and physicochemical properties," BioRes. 5(4), 2478-2501. PDF
Kautto, J., Saukkonen, E., and Henricson, K. (2010). "Digestibility and paper-making properties of prehydrolyzed softwood chips," BioRes. 5(4), 2502-2519. PDF
Mayeli, N., and Talaeipour, M. (2010). "Effect of different HLB value and enzymatic treatment on the properties of old newspaper deinked pulp," BioRes. 5(4), 2520-2534. PDF
Rodriguez, M., Rodrigues, A., Bayer R., J., Vilaseca, F., Girones, J., and Mutje, P. (2010). "Determination of corn stalk fibers' strength through modeling of the mechanical properties of its composites," BioRes. 5(4), 2535-2546. PDF
Sharma, R. K., Singh, J., and Chauhan, G. S. (2010). "Study of immobilization of protease and sorption of BSA on cellulose, cellulose derivatives, and graft copolymers," BioRes. 5(4), 2547-2555. PDF
Jonoobi, M., Harun, J., Tahir, P. M., Zaini, L. H., SaifulAzry, S., and Makinejad, M. D. (2010). "Characteristics of nanofibers extracted from kenaf core," BioRes. 5(4), 2556-2566. PDF
Loureiro, P. E. G., Domingues, E. F., Evtuguin, D. V., and Carvalhol, M. G., V. S. (2010). "ECF bleaching with a final hydrogen peroxide stage: Impact of the chemical composition of Eucalyptus globulus kraft pulp," BioRes. 5(4), 2567-2580. PDF
Wu, G.-F., Lang, Q., Qu, P., Jiang, Y.-F., and Pu, J. (2010). "Effect of chemical modification and hot-press drying on poplar wood," BioRes. 5(4), 2581-2590. PDF
González, D., Campos, A. R., Cunha, A. M., Santos, V., and Parajó, J. C. (2010). "Utilization of fibers obtained by peroxyformic acid processing of broom as reinforcing agents for biocomposites," BioRes. 5(4), 2591-2610. PDF
Hamdan, S., Rahman, M. R., Ahmed, A. S., Talib, Z. A., and Islam, M. S. (2010). "Influence of N,N-dimethylacetamid on the thermal and mechanical properties of polymer-filled wood," BioRes. 5(4), 2611-2624. PDF
He, Z., Ni, Y., and Zhou, Y. (2010). "Presence of hardwood chips and its impact on pulp strength properties in the production of bleached softwood kraft pulp," BioRes. 5(4), 2625-2639. PDF
Dogu, D., Tirak, K., Candan, Z., and Unsal, O. (2010). "Anatomical investigation of thermally compressed wood panels," BioRes. 5(4), 2640-2663. PDF
Kiuru, J., Tukiainen, P., and Tsitko, I. (2010). "Electrochemically generated biocides for controlling contamination in papermaking," BioRes. 5(4), 2664-2680. PDF
Wang, Q., Chen, K., Li, J., Liu, S., and Wang, Z. (2010). "A rapid method for determination of silicon content in black liquor by UV spectroscopy," BioRes. 5(4), 2681-2689. PDF
Ozkaya, K., Burdurlu, E., Ilce, A. C., and Ciritcioglu, H. H. (2010). "Diagonal tensile strength of an oriented strand-board (OSB) frame with dovetail corner joint," BioRes. 5(4), 2690-2701. PDF

Allix, J., Beneventi, D., Zeno, E., and Nortier, P. (2010). "Flotation de-inking of 50% ONP/ 50% OMG recovered papers mixtures using nonionic surfactant, soap, and surfactant/soap blends," BioRes. 5(4), 2702-2719.

PDF
Khalil, H. P. S. A., Bhat, I. H., and Awang, K. B. (2010). "Preliminary study on enhanced properties and biological resistance of chemically modified Acacia spp.,"BioRes. 5(4), 2720-2737. PDF
Popil, R. E. (2010). "High stiffness surface coating optimization through starch encapsulation of platy kaolin," BioRes. 5(4), 2738-2750. PDF
Bäckström, M., and Hammar, L.-A. (2010). "The influence of the counter-ions to the charged groups on the refinability of never-dried bleached pulps," BioRes. 5(4), 2751-2764. PDF
Rani, M., Agarwal, A., and Negi, Y. S. (2010). "Review: Chitosan based hydrogel polymeric beads - As drug delivery system," BioRes. 5(4), 2765-2807. PDF
Hubbe, M. A., Nazhad, M., and Sánchez, C. (2010). "Composting as a way to convert cellulosic biomass and organic waste into high-value soil amendments: A review," BioRes. 5(4), 2808-2854. PDF

Features of issue no. 5(3), Aug. 2010:

Bozell, J. J. (2010). "An evolution from pretreatment to fractionation will enable successful development of the integrated biorefinery," BioRes. 5(3), 1326-1327.
Shen, J., Song, Z., Qian, X., Yang, F., and Kong, F. (2010). "Nanofillers for papermaking wet end applications," BioRes. 5(3), 1328-1331.
Nambisan, P. (2010). "Utilization of weeds and agriwaste by popularizing handpapermaking in Kerala, India," BioRes. 5(3), 1332-1335.
Thompson, D. W., Hansen, E. N., Knowles, C., and Muszynski, L. (2010). "Opportunities for wood plastic composite products in the U.S. highway construction sector," BioRes. 5(3), 1336-1352. PDF
Xing, M., Yao, S., Zhou, S.-K., Zhao, Q., Lin, J.-H., and Pu, J.-W. (2010). "The influence of ultrasonic treatment on the bleaching of CMP revealed by surface and chemical structural analyses," BioRes. 5(3), 1353-1365. PDF
Kline, L. M., Hayes, D. G., Womac, A. R., and Labbé, N. (2010). "Simplified determination of lignin content in hard and soft woods via UV-spectrophotometric analysis of biomass dissoved in ionic liquids," BioRes. 5(3), 1366-1383. PDF
Babayemi, J. O., Dauda, K. T., Kayode, A. A. A., Nwude, D. O., Ajiboye, J. A., Essien, E. R., and Abiona, O. O. (2010). "Determination of potash alkali and metal contents of ashes obtained from peels of some varieties of Nigeria grown Musa species," BioRes. 5(3), 1384-1392. PDF
Ioelovich, M., Leykin, A., and Figovsky, O. (2010). "Study of cellulose paracrystallinity," BioRes. 5(3), 1393-1407. PDF
Beis, S. H., Mukkamala, S., Hill, N., Joseph, J., Baker, C., Jensen, B., Stemmler, E. A., Wheeler, M. C., Frederick, B. G., van Heiningen, A., Berg, A. G., and DeSisto, W. J. (2010). "Fast pyrolysis of lignins," BioRes. 5(3), 1408-1424. PDF
Shi, B., Shannon, T. G., and Pelky, E. (2010). "Novel use of waste keratin and cotton linter fibers for prototype tissue papers and their evaluation," BioRes. 5(3), 1425-1435. PDF
Stanciu, C. (2010). "Research concerning the use of beechwood prehydrolysates to grow yeasts," BioRes. 5(3), 1436-1445. PDF
Ang, L. S., Leh, C. P., and Lee, C. C. (2010). "Effects of alkaline pre-impregnation and pulping on Malaysia cultivated kenaf (Hibiscus cannabinus)," BioRes. 5(3), 1446-1462. PDF
Vieira, R. S., Lima, J. T., Silva, J. R. M., Hein, P. R. G., Baillères, H., and Baraúna, E. E. P. (2010). "Small wooden objects using eucalypt sawmill wood waste," BioRes. 5(3), 1463-1472. PDF
Altun, S., Burdurlu, E., and Kılıç, M. (2010). "Effect of adhesive type on the bending moment capacity of miter frame corner joints," BioRes. 5(3), 1473-1483. PDF
Feng, H., Li, J., and Wang, L. (2010). "Preparation of biodegradable flax shive cellulose-based superabsorbent polymer under microwave irradiation," BioRes. 5(3), 1484-1495. PDF
Lee, J. M., Jameel, H., and Venditti, R. A. (2010). "One and two stage autohydrolysis pretreatments for enzyme hydrolysis of coastal Bermuda grass to produce fermentable sugars," BioRes. 5(3), 1496-1508. PDF
Wong, Z., Chen, K., and Li, J. (2010). "Formation of vanillin and syringaldehyde in an oxygen delignification process," BioRes. 5(3), 1509-1516. PDF
Rekaby, M. M., El-Thalough, I. A., Rahman, A. A. H., and El-Khabery, S. A. E. (2010). "Technological evaluation of carboxymethyl sesbania galactomannan gum derivatives as thickeners in reactive printing," BioRes. 5(3), 1517-1529. PDF
Zhou, Y., Renneckar, S., Pillai, K. V., Li, Q., Lin, Z., and Church, W. T. (2010). "Layer-by-layer nanoscale bondlines for macroscale adhesion," BioRes. 5(3), 1530-1541. PDF
Azizi Mossello, A., Jalaluddin, H., Resalati, H., Rushdan I., Paridah, M. T., Fallah Shamsi, S. R. and Ainun, Z. M. A. (2010). "Soda-anthraquinone pulp from Malaysian cultivated kenaf for linerboard production," BioRes. 5(3), 1542-1553. PDF
Zamani, A., and Taherzadeh, M. J. (2010). "Production of low molecular weight chitosan by hot dilute sulfuric acid," BioRes. 5(3), 1554-1564. PDF
Zhao, X., van der Heide, E., Zhang, T., and Liu, D. (2010). "Delignification of sugarcane bagasse with alkali and peracetic acid and characterization of the pulp," BioRes. 5(3), 1565-1580. PDF
Chen, H., Chen, Y., Zhan, H., and Fu, S. (2010)."Enhanced biodegradation of pulping effluents by a statistical experimental design using microbial consortia," BioRes. 5(3), 1581-1594. PDF
Azizi Mossello, A., Harun, J., Ibrahim, R., Resalati, H., Shamsi, S. R. F., Tanir, P. M., and Yusoff, M. N. M. (2010). "Evaluation of linerboard properites from Malaysian cultivated kenaf soda-anthraquinone pulps versus commercial pulps," BioRes. 5(3), 1595-1604. PDF
Han, W., Chen, K., Yang, D.-D., Yang, F., Zhao, C., and Gao, W. (2010). "Utilization of bagasse fiber for preparation of biodegradable flame retarding composites (BFRCS)," BioRes. 5(3), 1605-1625. PDF
Kabir, M. A., Huque, M. M., Islam, M. R., and Bledzki, A. K. (2010). "Mechanical properties of jute fiber reinforced polypropylene composite: Effect of chemical treatment by benzenediazonium salt in alkaline medium," BioRes. 5(3), 1618-1625. PDF
Porankiewicz, B., Banski, A., and Wieloch, G. (2010). "Specific resistance and specific intensity of belt sanding of wood," BioRes. 5(3), 1626-1660. PDF
Ranjan, D., and Hasan, S. H. (2010). "Rice bran carbon: An alternative to commercial activated carbon for the removal of hexavalent chromium from aqueous solution," BioRes. 5(3), 1661-1674. PDF
Huber, P., Carré, B., and Zeno, E. (2010). "The effects of several non-oxidizing biocides on fine paper wet-end chemistry," BioRes. 5(3), 1675-1688. PDF
Meenakshi, Singh, G., Bhalla, A., and Hoondal, G. S. (2010). "Solid state fermentation and characterization of partically purified thermostable mannanase from Bacillus sp. MG-33," BioRes. 5(3), 1689-1701. PDF
Sheikhi, P., Talaeipour, M., Hemasi, A. H., Eslam, H. K., and Gumuskaya, E. (2010). "Effect of drying and chemical treatment on bagasse soda pulp properties during recycling," BioRes. 5(3), 1702-1716. PDF
Wang, K., Jiang, J.-X., Xu, F., Sun, R.-C., and Baird, M. S. (2010). "Influence of steam pressure on the physico-chemical properties of degraded hemicelluloses obtained from steam-exploded Lespedeza stalks," BioRes. 5(3), 1717-1732. PDF
Zhao, G., Lai, R., He, B., Greschik, T., and Li, X. (2010). "Replacement of softwood kraft pulp with ECF-bleached bamboo kraft pulp in fine paper," BioRes. 5(3), 1733-1744. PDF
Talebizadeh, A., and Rezayati-Charani, P. (2010). "Evaluation of pulp and paper making characteristics of rice stem fibers prepared by twin-screw extruder pulping," BioRes. 5(3), 1745-1761. PDF
Li, M.-F., Fan, Y.-M., Sun, R.-C., and Xu, F. (2010). "Characterization of extracted lignin of bamboo (Neosinocalamus affinis) pretreated with sodium hydroxide/urea solution at low temperature," BioRes. 5(3), 1762-1778. PDF
Zhou, S., Yao, S., Mian, X., and Pu, J. (2010). "Applied study of birch pulp bleaching using dimethyldioxirane to obtain acetate-grade pulp," BioRes. 5(3), 1779-1788. PDF
Chand, N., Sharma, J., Bapat, M. N., and Nigrawal, A. (2010). "Effect of positional density on DC conductivity of bamboo fibre," BioRes. 5(3), 1789-1798. PDF
Wang, B., He, B., and Li, J. (2010). "Study on lignin coverage of masson pine fiber," BioRes. 5(3), 1799-1810. PDF
Qu, P., Gao, Y., Wu, G.-F., and Zhang, L.-P. (2010). "Nanocomposites of poly(lactic acid) reinforced with cellulose nanofibrils," BioRes. 5(3), 1811-1823. PDF
Buyuksari, U., Avci, E., Ayrilmis, N., and Akkilic, H. (2010). "Effect of pine cone ratio on the wettability and surface roughness of particleboard," BioRes. 5(3), 1824-1833. PDF
El-Wakil, N. A., Fahmy, Y., Abou-Zeid, R. E., Dufresne, A., and El-Sherbiny, S. (2010). "Liquid crystalline behavior of hydroxypropyl cellulose esterified with 4-alkoxybenzoic acid," BioRes. 5(3), 1834-1845. PDF
Chikkol Venkateshappa, S., Bennehalli, B., Kenchappa, M. G., and Ranganagowda, R. P. G. (2010). "Flexural behaviour of areca fibers composites," BioRes. 5(3), 1846-1858. PDF
Ayrilmis, N., and Buyuksari, U. (2010). "Utilization of olive mill sludge in the manufacture of fiberboard," BioRes. 5(3), 1859-1867. PDF
Kurt, R. (2010). "Suitability of three hybrid poplar clones for laminated veneer lumber manufacturing using melamine urea formaldehyde adhesive," BioRes. 5(3), 1868-1878. PDF
Ezhumalai, S., and Thangavelu, V. (2010). "Kinetic and optimization studies on the bioconversion of lignocellulosic material into ethanol," BioRes. 5(3), 1879-1894. PDF
Zhang, X., and Liu, W. (2010). "Sodium titanate nanobelt as a microparticle to induce clay flocculation with CPAM," BioRes. 5(3), 1895-1907. PDF
Leponiemi, A.., Pahkala, K., and Heikkilä, T. (2010). "Storage of chemically pretreated wheat straw - A means to ensure quality raw material for pulp preparation," BioRes. 5(3), 1908-1922. PDF
Dai, Z., and Ni, Y. (2010). "Thermal stability of metal-pitch deposits from a spruce thermomechanical pulp by use of a differential scanning calorimeter," BioRes. 5(3), 1923-1935. PDF
Tumen, I, Aydemir, D., Gunduz, G., Uner, B., and Cetin, H. (2010). "Changes in the chemical structure of thermally treated wood," BioRes. 5(3), 1936-1944. PDF
Cheng, Q., Wang, J., McNeel, J. F., and Jacobson, P. M. (2010). "Water retention value measurements of cellulosic materials using a centrifugal technique," BioRes. 5(3), 1945-1954. PDF
Baty, J. W., Maitland, C. L., Minter, W., Hubbe, M. A., and Jordan-Mowery, S. K. (2010). "Deacidification for the conservation and preservation of paper-based works: A review," BioRes. 5(3), 1955-2023. PDF

Features of issue no. 5(2), May 2010:

Lucia, L. A., and Hubbe, M. A. (2010). "Can lignocellulosic biosynthesis be the key to its economical deconstruction?"BioRes. 5(2), 507-509.
Shen, J., Song, Z., Qian, X., Liu, W., and Yang, F. (2010). "Filler engineering for papermaking: Comparison with fiber engineering and some important research topics," BioRes. 5(2), 510-513.
Kiuru, J., Tsitko, I., Sievänen, J., and Wathén, R. (2010). "Optimization of biocide strategies on fine paper machines," BioRes. 5(2), 514-524.
Mao, H., Genco, J. M., van Heiningen, A., and Pendse, H. (2010). "Kraft mill biorefinery to produce acetic acid and ethanol: Technical economic analysis," BioRes. 5(2), 525-544.
Şahin Kol, H., Uysal, B., Kurt, Ş, and Ozcan, C. (2010). "Thermal conductivity of oak impregnated with some chemicals and finished," BioRes. 5(2), 545-555.
Yao, S., Wu, G., Xing, M., Zhou, S., and Pu, J. (2010). "Determination of lignin content in Acacia spp. using near-infrared reflectance spectroscopy," BioRes. 5(2), 556-562. PDF
Hasan, S. H., Ranjan, D., and Talat, M. (2010). "Water hyacinth biomass (WHB) for the biosorption of hexavalent chromium : Optimization of process parameters," BioRes. 5(2), 563-575. PDF
Li, K., Fu, S., Zhan, H., Zhan, Y., and Lucia, L. (2010). "Analysis of the chemical composition and morphological structure of banana pseudo-stem," BioRes. 5(2), 576-585. PDF
Özçifçi, A., and Özbay, G. (2010). "Impacts of bleaching chemicals and outdoor exposure on changes in the color of some varnished woods," BioRes. 5(2), 586-597. PDF
Pandey, K. K., Hughes, M., and Vuorinen, T. (2010). "Dimensional stability, UV resistance, and static mechanical properties of Scots pine chemically modified with alkylene expoxides," BioRes. 5(2), 598-615. PDF
Peng, H., Sun, Y., Zhang, J., and Lin, L. (2010). "Degradation of cellooligosaccharides in oxidative medium and alkaline medium: HPLC, FTIR, and GC-MS analyses," BioRes. 5(2), 616-633. PDF
Gilleran, C. T., Hernon, A. T., Murray, P. G., and Tuohy, M. G. (2010). "Induction of enzyme cocktails by low cost carbon sources for production of monosaccharide-rich syrups from plant materials," BioRes. 5(2), 634-649. PDF
Zabihzadeh, S. M. (2010). "Flexural properties and orthotropic swelling behavior of bagasse/thermoplastic composites," BioRes. 5(2), 650-660. PDF
Mulinari, D. R., Voorwald, H. J. C., Cioffi, M. O. H., Rocha, G. J., and Pinto Da Silva, M. L. C. (2010). "Surface modification of sugarcane bagasse cellulose and its effect on mechanical and water absorption properties of sugarcane bagasse cellulose/HDPE composites," BioRes. 5(2), 661-671. PDF
Sbiai, A., Maazouz, A., Fleury, E., Sautereau, H., and Kaddami, H. (2010). "Short date palm tree fibers / polyepoxy composites prepared using RTM process: Effect of TEMPO mediated oxidation of the fibers," BioRes. 5(2), 672-689. PDF
Hosseini Hashemi, S. H., Latibari, A. J., Khademi-Eslam, H., and Alamuti, R. F. (2010). "Effect of boric acid treatment on decay resistance and mechanical properties of poplar wood," BioRes. 5(2), 690-698. PDF
Akpinar, O., Gunay, K., Yilmaz, Y., Levent, O., and Bostanci, S. (2010). "Enzymatic processing and antioxidant activity of agricultural waste autohydrolysis liquors," BioRes. 5(2), 699-711. PDF
Li, J., Qian, X., Wang, L., and An, X. (2010). "XPS characterization and percolation behavior of polyaniline-coated conductive paper," BioRes. 5(2), 712-726. PDF
Siqueira, G., Bras, J., and Dufresne, A. (2010). "Luffa cylindrica as a lignocellulosic source of fiber, microfibrillated cellulose, and cellulose nanocrystals," BioRes. 5(2), 727-740. PDF
Soni, S. K., Batra, N., Bansal, N., and Soni, R. (2010). "Bioconversion of sugarcane bagasse into second generation bioethanol after enzymatic hydrolysis with in-house produced cellulases from Aspergillus sp. S4B2F," BioRes. 5(2), 741-757. PDF
Pan, M., Zhou, D., Ding, T., and Zhou, X. (2010). "Water resistance and some mechanical properties of rice straw fiberboards affected by thermal modification," BioRes. 5(2), 758-769. PDF
Landry, V., Blanchet, P., and Vaillancourt, É. (2010). "Reducing VOC emissions in the furniture and cabinets industries: An opportunity for hybrid coating systems," BioRes. 5(2), 770-779. PDF
Zhang, Y., Cao, C.-Y., Hou, Q.-X., Feng, W.-Y., Xu, M., Su, Z.-H., Lin, Q.-Y., Zhuang, J.-F., and Lv, W.-J. (2010). "Using a membrane filtration process to concentrate the effluent from alkaline peroxide mechanical pulping plants," BioRes. 5(2), 780-795. PDF
Sandquist, D., Filonova, L., von Schantz, L., Ohlin, M., and Daniel, G. (2009). "Microdistribution of xyloglucan in differentiating poplar cells," BioRes. 5(2), 796-807 PDF
Mustjoki, S., Leponiemi, A., and Dahl, O. (2010). "Alkaline peroxide bleaching of hot water treated wheat straw," BioRes. 5(2), 808-826. PDF
Lou, R., Wu, S.-B., and Lv, G.-J. (2010). "Fast pyrolysis of enzymatic/mild acidolysis lignin from moso bamboo," BioRes. 5(2), 827-837. PDF
Prasad, A. G. D., and Abdullah, M. A. (2010). "Biosorption of Cr(VI) from synthetic wastewater using the fruit shell of gulhomar (Delonix regia): Application to electroplating wastewater," BioRes. 5(2), 838-853. PDF
Rahman, M. R., Islam, M. N., Huque, M. M., Hamdan, S., and Ahmed, A. S. (2010). "Effect of chemical treatment on rice husk (RH) reinforced polyethylene (PE) composites," BioRes. 5(2), 854-869. PDF
Jahan, M. S., Ni, Y., and He, Z. (2010). "Chlorine dioxide bleaching of soda-anthraquinone jute pulp to a very high brightness," BioRes. 5(2), 870-880. PDF
Barros, D. P., Silva, V. L., Hämäläinen, H., and Colodette, J. L. (2010). "Effect of last stage bleaching with peracetic acid on brightness development and properties of eucalyptus pulp," BioRes. 5(2), 881-898. PDF
Qian, X., Shen, J., Yu, G., and An, X. (2010). "Influence of pulp fiber substrate on conductivity of polyaniline-coated conductive paper prepared by in-situ polymerization," BioRes. 5(2), 899-907. PDF
Bhattacharya, P., Hassan, E. B., Steele, P., Cooper, J., and Ingram, L. (2010). "Effect of acid catalysts and accelerated aging on the reaction of methanol with hydroxy-acetaldehyde in bio-oil," BioRes. 5(2), 908-919. PDF
Saritha, V., and Maruthi, Y. A. (2010). "Soil fungi: Potential mycoremediators of lignocellulosic waste," BioRes.5(2), 920-938. PDF
Mirahmadi, K., Kabir, M. M., Jeihanipour, A., Karimi, K., and Taherzadeh, M. J. (2010). "Alkaline pretreatment of spruce and birch to improve bioethannol and biogas production," BioRes. 5(2), 928-938. PDF
Khosravani, A., Latibari, A. J., Mirshokraei, S. A., Rahmanninia, M., and Nazhad, M. M. (2010). "Studying the effect of cationic starch-anionic nanosilica system on retention and drainage," BioRes. 5(2), 939-950. PDF
Benazir, J. A. F., Manimekalai, V., Ravichandran, P., Suganthi, R., and Dinesh, D. C. (2010). "Properties of fibres/culm strands from mat sedge - Cyperus pangorei Rottb.," BioRes. 5(2), 951-967. PDF
Jarusombuti, S., Ayrilmis, N., Bauchongkol, P., and Fueangvivat, V. (2010). "Surface characteristics and overlaying properties of MDF panels made from thermally treated rubberwood fibers," BioRes. 5(2), 968-978. PDF
Shakeri, A., and Staiger, M. P. (2010). "Phase transformations in regenerated microcyrstalline cellulose following dissolution by an ionic liquid," BioRes. 5(2), 979-989. PDF
Fox, S. C., and McDonald, A. G. (2010). "Chemical and thermal characterization of three industrial lignins and their corresponding lignin esters," BioRes. 5(2), 990-1009. PDF
Pereira, P. H. F., Voorwald, H. C. J., Cioffi, M. O. H., and Pinto Da Silva, M. L. C. (2010). "Preparation and characterization of cellulose/ hydrous niobium phosphate hybrid," BioRes. 5(2), 1010-1021. PDF
Rahman, M. R., Hamdan, S., Ahmed, A. S., and Islam, M. S. (2010). "Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (PW),"BioRes. 5(2), 1022-1035. PDF
Karaaslan, A. M., Tshabalala, M. A., and Buschle-Diller, G. (2010). "Wood hemicellulose/chitosan-based semi-interpenetrating network hydrogels: Mechanical, swelling and controlled drug release properties," BioRes. 5(2), 1036-1054. PDF
Singha, A. S., and Rana, R. K. (2010). "Effect of pressure induced graft copolymerization on the physico-chemical properties of bio-fibers," BioRes. 5(2), 1055-1073. PDF
Istek, A.,. Aydemir, D., and Aksu, S. (2010). "The effect of decor paper and resin type on the physical, mechanical, and surface quality properties of particleboards coated with impregnated decor papers,"BioRes. 5(2), 1074-1083. PDF
Lee, J. M., Jameel, H., and Venditti, R. A. (2010). "Effect of ozone and autohydrolysis pretreatments on enzymatic digestibility of coastal Bermuda grass," BioRes. 5(2), 1084-1101. PDF
Nechita, P., Dobrin, E., Ciolacu, F., and Bobu, E. (2010). "The biodegradability and mechanical strength of nutritive pots for vegetable planting based on lignocellulose composite materials," BioRes. 5(2), 1102-1113. PDF
Yang, S., Fu, S., Li, X., Zhou, Y., and Zhan, H. (2010). "Preparation of salt-sensitive and antibacterial hydrogel based on quaternized cellulose," BioRes. 5(2), 1114-1125. PDF
Sehlstedt-Persson, M., and Karlsson, O. (2010). "Natural durability and phenolic content in dried Scots pine heartwood," BioRes. 5(2), 1126-1142. PDF
Carvalho, K. C. C., Mulinari, D. R., Voorwald, H. J. C., and Cioffi, M. O. H. (2010). "Chemical modification effect on the mechanical properties of HIPS/coconut fiber composites," BioRes. 5(2), 1143-1155. PDF
Chen, G., Fu, S., Liu, R., Zhan, H., and Chen, Y. (2010). "Analysis of structural changes of Masson pine lignin reacted with superoxide anion radical using NMR spectroscopy," BioRes. 5(2), 1156-1163. PDF
Blomstedt, M., Asikainen, J., Lähdeniemi, A., Ylönen, T., Paltakari, J., and Hakala, T. K. (2010). "Effect of xylanase treatment on dewatering properties of birch kraft pulp," BioRes. 5(2), 1164-1177. PDF
Deng, Y., Wu, Y., Qian, Y., Ouyang, X., Yang, D., and Qiu, X. (2010). "Adsorption and desorption behaviors of lignosulfonate during the self-assembly of multilayers," BioRes. 5(2), 1178-1196. PDF
Agnihotri, S., Dutt, D., and Tyagi, C. H. (2010). "Complete characterization of bagasse of early species of Saccharum officenerum-co 89003 for pulp and paper making," BioRes. 5(2), 1197-1214. PDF
Halvarsson, S., Edlund, H., and Norgren, M. (2010). "Wheat straw as raw material for manufacture of medium density fiberboard (MDF)," BioRes. 5(2), 1215-1231. PDF
Jacobs, A., Botha, A., Reddy, J., and Van Zyl, W. H. (2010). "Sunflower press cake as a substrate for eicosapentaenoic acid production by representatives of the genus Mortierella," BioRes. 5(2), 1232-1243. PDF
Mahmood, T., Malik, S. A., and Hussain, S. T. (2010). "Biosorption and recovery of heavy metals from aqueous solutions by Eichhornia crassipes (water hyacinth) ash," BioRes. 5(2), 1244-1256. PDF
Tuong, V. M., and Li, J. (2010). "Effect of heat treatment on the change in color and dimensional stability of acacia hybrid wood," BioRes. 5(2), 1257-1267. PDF
Shakhes, J.., Dehghani-Firouzabadi, M. R., Rezayati-Charani, P., and Zeinaly, F. (2010). "Evaluation of harvesting time effects and cultivars of kenaf on papermaking," BioRes. 5(2), 1268-1280. PDF
Lv, G.-J., Wu, S.-B., and Lou, R. (2010). "Kinetic study of the thermal decomposition of hemicellulose isolated from corn stalk," BioRes. 5(2), 1281-1291. PDF
Kumar, S., Upadhyaya, J. S., and Negi, Y. S. (2010). "Preparation of nanoparticles from corn cobbs by chemical treatment methods," BioRes. 5(2), 1292-1300. PDF
Mukhopadhyay, S., and Chatterjee, N. C. (2010). "Bioconversion of water hyacinth hydrolysate into ethanol," BioRes. 5(2), 1301-1310. PDF
Bajpai, P. K. (2010). "Solving the problems of recycled fiber processing with enzymes," BioRes. 5(2), 1311-1325. PDF


Features of issue no. 5(1), Feb. 2010:

Hubbe, M. A., and Buehlmann, U. (2010). "A continuing reverence for wood," BioRes. 5(1), 1-2.
Wang, Q., and Zhu, S. (2010). "Genetically modified lignocellulosic biomass for improvement of ethanol production," BioRes. 5(1), 3-4.
Shen, J., Song, Z., and Qian, X. (2010)."Possible trends of renewable organic fillers and pigments derived from natural resources for sustainable development of paper industry,"BioRes. 5(1), 5-7.
Saritha, V., Maruthi, A., and Mukkanti, K. (2010). "Potential fungi for bioremediation of industrial effluents,"BioRes. 5(1), 8-22. PDF
Zhang, X.., Tu, M., Paice, M., Sacciadis, G., Jiang, Z., Jemaa, N., and Thibault, A. (2010). "Bioconversion of knot rejects from a sulphite pulp mill to ethanol," BioRes. 5(1), 23-42. PDF
Abdel-Kader, A. H., and Darweesh, H. H. (2010). "Setting and hardening of agro/cement composites," BioRes. 5(1), 43-54. PDF
Afzal, M. T., Bedane, A. H., Sokhansanj, S., and Mahmood, W. (2010). "Storage of comminuted and uncomminuted forest biomass and its effect on fuel quality," BioRes. 5(1), 55-69. PDF
Sahin Kol, H., Ozbay, G., Köse, L., and Kurt, S. (2010). "Effects of some impregnation chemicals on combusion characteristics of laminated veneer lumber (LVL) produced with oak and poplar veneers," BioRes. 5(1), 70-80. PDF
Soni, S. K., and Soni, R. (2010). "Regulation of cellulase synthesis in Chaetomium erraticum,"BioRes. 5(1), 81-98. PDF
Phanphanich, M., and Mani, S. (2010). "Drying characteristics of pine forest residues," BioRes. 5(1), 108-120. PDF
Patel, S. V., Venditti, R. A., and Pawlak, J. J. (2010). "Dimensional changes of starch microcellular foam during the exchange of water with ethanol and subsequent drying," BioRes. 5(1), 121-134. PDF
Zhang, M., Chen, H.-P, Gao, Y., He, R.-X., Yang, H.-P., Wang, X.-H., and Zhang, S. H. (2010). "Experimental study on bio-oil pyrolysis/gasification," BioRes.5(1), 135-146. PDF
Lu, X., Zhang, Y., Yu, Y., and Ji, J. (2010). "Deacidification and esterification of waste cooking oil: Comparison of the coupled process with stand-alone catalytic esterification and extraction processes," BioRes. 5(1), 147-158. PDF
Yadav, R. D., Chaudhry, S., and Dhiman, S. S. (2010). "Biopulping and its potential to reduce effluent loads from bleaching of hardwood kraft pulp," BioRes. 5(1), 159-171. PDF
Valto, P., Knuutinen, J., Alén, R., Rantalankila, M., Lehmonen, J., Grönroos, A., and Houni, J. (2010). "Analysis of resin and fatty acids enriched in papermaking process waters," BioRes. 5(1), 172-186. PDF
Sitholé, B., Shirin, S., Zhang, X., Lapierre, L., Pimentel, J., and Paice, M. (2010). "Deresination options in sulphite pulping," BioRes. 5(1), 187-205. PDF
Granholm, K., Harju, L., and Ivaska, A. (2010). "Desorption of metal ions from kraft pulps. Part 1. Chelation of hardwood and softwood kraft pulp with EDTA," BioRes. 5(1), 206-226. PDF
Granholm, K., Harju, L., and Ivaska, A. (2010). "Desorption of metal ions from kraft pulps. Part 2. Chelation of kraft pulps with different complexing agents and with EDTA in a reducing environment," BioRes. 5(1), 227-243. PDF
Chun, D. T. W., Foulk, J. A., and McAlister, D. D. III. (2010). "Antibacterial properties and drying effects of flax denim and antibacterial properties of nonwoven flax fabric," BioRes. 5(1), 244-258. PDF
Chalamcherla, V. L., Singaracharya, M. A., and Lakshmi M., V. (2010). "Amino acids profile of the lignocellulosic feed treated with cellulase-free lignolytic mutants of Pleurotus ostreatus," BioRes. 5(1), 259-267. PDF
Taşkın, E., Eltem, R., and Soyak, E. (2010). "Enhancement of solid state fermentation for production of penicillin G on sugar beet pulp," BioRes. 5(1), 268-275. PDF
Zhao, Q., Pu, J., Mao, S., and Qi, G. (2010). "Process optimization of tetra acetyl ethylene diamine activated hydrogen peroxide bleaching of populus nigra CTMP," BioRes. 5(1), 276-290. PDF
Bouiri, B., and Amrani, M. (2010). "Production of dissolving grade pulp from alfa," BioRes. 5(1), 291-302. PDF
Ding, C., Qian, X., Shen, J., and An, X. (2010). "Preparation and characterization of conductive paper via in-situ polymerization of pyrrole," BioRes. 5(1), 303-315. PDF
Zabihzadeh, S. M. (2010). "Water uptake and flexural properties of natural filler/HDPE composites," BioRes. 5(1), 316-323. PDF
Hamdan, S., Talib, Z. A., Rahman, M. R., Ahmed, A. S., and Islam, M. S. (2010). "Dynamic Young's modulus measurement of treated and post-treated tropical wood polymer composites (WPC)," BioRes. 5(1), 324-342. PDF
Atar, M., Keskin, H., Peker, H., Ustündağ, A., Togay, A., and Candan, Z. (2010). "Impacts of different joint angles and adhesives on diagonal tension perfrmances of box-type furniture," BioRes. 5(1), 343-355. PDF
Tunc, M. S., Lawoko, M., and van Heiningen, A. (2010). "Understanding the limitations of removal of hemicelluloses during authohydrolysis of a mixture of Southern hardwoods," BioRes. 5(1), 356-371. PDF
Chand, N., Bajpai, S. K., Joshi, R., and Mary, G. (2010). "Thermomechanical behavior of sisal fibers grafted with poly(acrylamide-co-N-vinyl-2-pyrrolidone) and loaded with silver ions or silver nanoparticles," BioRes. 5(1), 372-388. PDF
Swapnavahini, K., Srinivas, T., Kumar, P. L., Kumari, M. S., and Lakshmi, T. (2010). "Feasibility study of anaerobic digestion of Ocimum sanctum leaf waste generated from Sanctum sanctorum," BioRes 5(1), 389-396. PDF
Ibrahim, M. M., Agblevor, F. A., and El-Zawawy, W. K. (2010). "Isolation and characterization of cellulose and lignin from steam-exploded lignocellulosic biomass," BioRes 5(1), 397-418. PDF
Thirumalisamy, S., and Subbian, M. (2010). "Removal of methylene blue from aqueous solution by activated carbon prepared from the peel of Cucumis sativa fruit by adsorption," BioRes. 5(1), 419-437. PDF
Srinivasa Rao, K. S., Anand, S., and Venkateswarlu, P. (2010). "Adsorption of cadmium(II) ions from aqueous solution by Tectona grandis l.f. (teak leaves powder)," BioRes. 5(1), 438-454. PDF
Shallhorn, P., and Gurnagul, N. (2010). "A semi-empirical model of the tensile energy adsorption of sack kraft paper," BioRes. 5(1), 455-476. PDF
Talaeipour, M., Hemmasi, A. M., Kasmani, J. E., Mirshokraie, S. A., and Khademieslam, H. (2010). "Effects of fungal treatment on structural and chemical features of hornbeam chips," BioRes. 5(1), 477-487. PDF
Yang, X., Zeng, Y., and Zhang, X. (2010). "Influence of biopretreatment on the character of corn stover lignin as shown by thermogravimetric and chemical structural analyses," BioRes. 5(1), 488-498. PDF
Papadopoulos, A. N. (2010). "Chemical modification of solid wood and wood raw material for composites produciton with linear chain carboxylic acid anhydrides: A brief review," BioRes. 5(1), 499-506. PDF

Features of issue no. 4(4), Nov. 2009:

Dasmohapatra, S. (2009). "Future marketing drivers for the forest products industry," BioRes. 4(4), 1263-1266.
Hamzeh, Y., Abyaz, A., Mirfatahi Niaraki, M. O., and Abdulkhani, A. (2009). "Application of surfactants as pulping additives in soda pulping of bagasse," BioRes. 4(4), 1267-1275.
Telysheva, G., Dizhbite, T., Jashina, L., Andersone, A., Volperts, A., Ponomarenko, J., and Mironova-Ulmane, N. (2009). "Synthesis of lignin-based inorganic/organic hybrid materials favorable for detoxification of ecosystem components," BioRes. 4(4), 1276-1284. PDF
Bodîrlău, R., Teacă, C. A., and Spiridon, I. (2009). "Preparation and characterization of composites comprising modified hardwood and wood polymers/poly(vinyl chloride)," BioRes. 4(4), 1285-1304. PDF
Haron, M. J., Tiansih, M., Ibrahim, N. A., Kassim, A., and Wan Yunus, W. M. Z. (2009). "Sorption of Cu(II) by poly(hydroxamic acid) chelating exchanger prepared from poly(methyl acrylate) grafted oil palm empty fruit bunch (OPEFB)," BioRes. 4(4), 1305-1318. PDF
Sukhbaatar, B., Steele, P. H., Ingram, L. L., and Kim, M. (2009). "An exploratory study on the removal of acetic and formic acids from bio-oil," BioRes. 4(4), 1319-1329. PDF
Nechita, P., Bobu, E., Ciolacu, F., and Kontek, A. (2009). "Study on fibrous composites behaviour in hydrodynamic process of wine filtration," BioRes. 4(4), 1330-1340. PDF
Pirraglia, A., Saloni, D., and van Dyk, H. (2009). "Status of lean manufacturing implementation on secondary wood industries including residential, cabinet, millwork, and panel markets," BioRes. 4(4), 1341-1358. PDF
Nada, A. M. A., El-Kady, M. Y., El-Sayed, E. S. A., and Amine, F. M. (2009). "Preparation and characterization of microcrystalline cellulose (MCC)," BioRes. 4(4), 1359-1371. PDF
Quintero, O. L., Amicarelli, A. A., Scaglia, G., and di Sciascio, F. (2009). "Control based on numerical methods and recursive Bayesian estimation in a continuous alcoholic fermentation process," BioRes. 4(4), 1372-1395. PDF
Garay, R. M., MacDonald, F., Avecedo, M. L., Calderón, B., and Araya, J. E. (2009). "Particleboard made with crop residues mixed with wood from Pinus radiata," BioRes. 4(4), 1396-1408. PDF
Zeinaly, F., Shakhes, J., Firozabadi, M. D., and Shakeri, A. (2009). "Hydrogen peroxide bleaching of CMP pulp using magnesium hydroxide," BioRes. 4(4), 1409-1416. PDF
Erakhrumen, A. A., and Ogunsanwo, O. Y. (2009). "Water absorption, anti-swell efficiency, and dimensional stability properties of neem seed-oil treated wild grown Bambusa vulgaris Schard. ex J. C. Wendl. in southwest Nigeria,"BioRes. 4(4), 1417-1429. PDF

Brännström, M. (2009). "The impact of a strength grading process on sawmill profitability and product quality," BioRes. 4(4), 1430-1454.

PDF
Saw, S. K., and Datta, C. (2009). "Thermomechanical properties of jute/bagasse hybrid reinforced epoxy thermoset composites," BioRes. 4(4), 1455-1476. PDF
Wang, J., Chen, Y., Wang, X., and Cao, F. (2009). "Aluminum dodecatungstophosphate (Al0.9H0.3PW12O40) nanotube as a solid acid catalyst one-pot production of biodiesel from waste cooking oil," BioRes. 4(4), 1477-1486. PDF
Wu, Y., Zhou, D.-G., Wang, S.-Q., and Zhang, Y. (2009). "Polypropylene composites reinforced with rice straw micro/nano fibrils isolated by high intensity ultrasonication," BioRes. 4(4), 1487-1497. PDF
Shen, J., Song, Z., Qian, X., and Liu, W. (2009). "Modification of precipitated calcium carbonate filler using sodium silicate/zinc chloride based modifiers to improve acid-resistance and use of the modified filler in papermaking," BioRes. 4(4), 1498-1519. PDF
Li, J., Xiao, B., Yan, R., and Liu, J. (2009). "Development of a nano-Ni-La-Fe/Al2O3 catalyst to be used for syn-gas production and tar removal after biomass gasification," BioRes. 4(4), 1520-1535. PDF
Ayrilmis, N., Dundar, T., Candan, Z., and Akbulut, T. (2009). "Wettability of fire retardant treated laminated veneer lumber (LVL) manufactured from veneers dried at different temperatures," BioRes. 4(4), 1536-1544. PDF
Sahin Kol, H., Özbay, G., and Altun, S. (2009). "Shear strength of heat-treated tali (Erythrophleum ivornese) and iroko (Chlorophora excelsa) woods, bonded with various adhesives," BioRes. 4(4), 1545-1554. PDF
Olsson, M. R. and Berntsson, T. (2009). "Simulations comparing conventional evaporation plants with plants using excess heat," BioRes. 4(4), 1555-1571. PDF
Korpinen, R. I., and Fardim, P. E. (2009). "Reinforcement potential of bleached sawdust kraft pulp in different mechanical pulp furnishes," BioRes. 4(4), 1572-1585. PDF
Ouyang, J., Li, Z., Li, X., Ying, H., and Yong, Q. (2009). "Enhanced enzymatic conversion and glucose production via two-step enzymatic hydrolysis of corncob residue from xylo-oligosaccharides producer's waste," BioRes. 4(4), 1586-1599. PDF
Lähdetie, A., Liitiä, T., Tamminen, T., and Jääskeläinen, A. S. (2009). "Reflectance UV-vis and UV resonance Raman spectroscopy in characterization of kraft pulps," BioRes. 4(4), 1600-1619. PDF
Hein, P. R. G., Sá, V. A. de, Bulfalino, L., and Mendes, L. M. (2009). "Calibrations based on near infrared spectroscopic data to estimate wood-cement panel properties," BioRes. 4(4), 1620-1634. PDF
Kumar, P., Gautam, S. K., Kumar, V., and Singh, S. P. (2009). "Enhancement of optical properties of bagasse pulp by in-situ filler precipitation," BioRes. 4(4), 1635-1646. PDF
Myllytie, P., Salmi, J., and Laine, J. (2009). "The influence of pH on the adsorption and interaction of chitosan with cellulose," BioRes. 4(4), 1647-1662. PDF
Şahin Kol, H. (2009). "Thermal and dielectric properties of pine wood in the transverse direction," BioRes. 4(4), 1663-1669. PDF
Adsul, M. G., Terwadkar, A. P., Varma, A. J., and Gokhale, D. V. (2009). "Cellulases from Penicillium janthinellum mutants: Solid-state production and their stability in ionic liquids," BioRes. 4(4), 1670-1681. PDF
Kurt, Ş., Uysal, B., Özcan, C., and Yildirim, M. N. (2009). "The effects of edge banding thickness of uludag fir bonded with some adhesives on withdrawal strengths of beech dowel pins in composite materials," BioRes. 4(4), 1682-1693. PDF
Madhavi, V., and Lele, S. S. (2009)."Laccase: Properties and applications," BioRes. 4(4), 1694-1717. PDF
Virkajärvi, I., Niemelä, M. V., Hasanen, A., and Teir, A. (2009). "Cellulosic ethanol via biochemical processing poses a challenge for developers and implementors," BioRes. 4(4), 1718-1735. PDF
Hubbe, M. A., and Bowden, C. (2009). "Handmade paper: A review of its history, craft, and science," BioRes. 4(4), 1736-1792. PDF

Features of issue no. 4(3), Aug. 2009:

Treimanis, A. (2009). "Should we be refining first, then discarding fines, then bleaching?" BioRes. 4(2), 907-908.
Arora, D. S., and Sharma, R. K. (2009). "Enhancement in in vitro digestibility of wheat straw obtained from different geographic regions during solid state fermentation by white rot fungi," BioRes. 4(3), 909-920. PDF
Jahan, M. S., and Rawshan, S. (2009). "Reinforcing potential of jute pulp with Trema orientalis (nalita) pulp," BioRes. 4(2), 921-931. PDF
Gupta, V. K., Gaur, R., Yadava, S. K., and Darmal, N. S. (2009). "Optimization of xylanase production from free and immobilized cells of Fusarium solani F7," BioRes. 4(3), 932-945. PDF
Wang, X.-H., Chen, H.-P., Ding, X.-J., Yang, H.-P., Zhang, S.-H., and Shen, Y.-Q. (2009). "Properties of gas and char from microwave pyrolysis of pine sawdust," BioRes. 4(3), 946-959. PDF
Kurt, Ş., and Özçifçi, A. (2009). "Effect of various fire retardants on Brinell hardness of some wood," BioRes. 4(3), 960-969. PDF
Abdolzadeh, H., and Doosthoseini, K. (2009). "Evaluation of old corrugated container and wood fiber application on surface roughness of three-layer particleboard," BioRes. 4(3), 970-978. PDF
Zhou, J., Sui, X., and Shi, H. (2009). "Study on the structural change of lignin during auto-catalyzed ethanol-water pulping of aspen by 1H-NMR," BioRes. 4(3), 979-985. PDF
Sharma, R. K., and Chauhan, G. S. (2009). "Synthesis and characterization of graft copolymers of 2-hdroxyethyl methacrylate and some comonomers onto extracted cellulose for use in separation technologies," BioRes 4(3), 986-1005. PDF
Guo, S., Zhan, H., Zhang, C., Fu, S., Heijnesson-Hultén, A., Basta, J., and Greshick, T. (2009). "Pulp and fiber characteristics of wheat straw and eucalyptus pulps - A comparison," BioRes. 4(3), 1006-1016. PDF
Nada, A. M. A., Mahdy, A. A., and El-Gendy, A. A. (2009). "Spectroscopy and chemical studies of cation exchangers prepared from corn cobs,"BioRes. 4(3), 1017-1031. PDF
Ates, S., Akyildiz, M. H., and Ozdemir, H. (2009). "Effects of heat treatment on calabrian pine (Pinus brutia ten.) wood," BioRes. 4(3), 1032-1043. PDF
Chirkova, J., Andersons, B., and Andersone, I. (2009). "Study of the structure of wood-related biopolymers by sorption methods," BioRes. 4(3), 1044-1057. PDF
Campos, A. C. M., Hein, P. R. G., Mendes, R. F., Mendes, L. M., and Chaix, G. (2009). "Near infrared spectroscopy to evaluate composition of agro-based particleboards," BioRes. 4(3), 1058-1069. PDF
Kumarappan, S., Joshi, S., and MacLean, H. L. (2009). "Biomass supply for biofuel production: Estimates for the United States and Canada," BioRes. 4(3), 1070-1087. PDF
Kong, F., and Ni, Y. (2009). "Development of cellulosic paper-based test strips for Cr(VI) determination," BioRes. 4(3), 1088-1097. PDF
Yokota, S., Ohta, T., Kitaoka, T., and Wariishi, H. (2009). "Adsorption of cellobiose-pendant polymers to a cellulose matrix determined by quartz crystal microbalance analysis," BioRes. 4(3), 1098-1108. PDF
Sanghi, A., Garg, N., Kuhar, K., Kuhad, R. C., and Gupta, V. K. (2009). "Enhanced production of cellulase-free xylanase by alkalophilic Bacillus subtilis ASH and its application in biobleaching of kraft pulp," BioRes. 4(3), 1109-1129. PDF
Bhoria, P., Singh, G., and Hoodal, G. S. (2009). "Optimization of mannase production from Streptomyces sp. PG-08-03 in submerged fermentation," BioRes. 4(3), 1130-1138. PDF
Masingale, M. P., Alves, E. F., Korbieh, T. N., Bose, S. K., and Francis, R. C. (2009). "An oxidant to replace nitrobenzene in lignin analysis," BioRes. 4(3), 1139-1146. PDF
Zhuang, J., Lin, L., Liu, J., Luo, X., Pang, C., and Ouyang, P. (2009). "Preparation of xylose and kraft pulp from poplar based on formic/acetic acid/ water system hydrolysis," BioRes. 4(3), 1147-1157. PDF
Hu, J.-J., Lei, T.-Z., Xu, G.-Y., Shen, S.-Q., and Liu, J.-W. (2009). "Experimental study of stress relaxation in the process of cold molding with straw," BioRes. 4(3), 1158-1167. PDF
Ioelovich, M. (2009). "Accessibility and crystallinity of cellulose," BioRes. 4(3), 1168-1177. PDF
Shen, J., Song, Z., Qian, X., and Liu, W. (2009). "A preliminary investigation into the use of acid-tolerant precipitated calcium carbonate fillers in papermaking of deinked pulp derived from recycled newspaper," BioRes. 4(3), 1178-1189. PDF
Shen, J., Song, Z., Qian, X., and Liu, W. (2009). "Modification of papermaking grade fillers: A brief review," BioRes. 4(3), 1190-1209. PDF
Muszyński, L. (2009). "Imaging wood plastic composites (WPCs): X-ray computed tomography, a few other promising techniques, and why we should pay attention," BioRes. 4(3), 1210-1221. PDF
Wu, N., Hubbe, M. A., Rojas, O. J., and Park, S. (2009). "Permeation of polyelectrolytes and other solutes into the pore spaces of water-swollen cellulose: A review," BioRes. 4(3), 1222-1262. PDF

Features of issue no. 4(2), May 2009:

Sun, R.-C. (2009). "'Detoxification and separation of lignocellulosic biomass prior to fermentation for bioethanol production by removal of lignin and hemicelluloses" BioRes. 4(2), 452-455.
Cheng, S., and Zhu, S. (2009). "Lignocellulosic feedstock biorefinery - The future of the chemical and energy industry," BioRes. 4(2), 456-457. PDF
Xiu, S., Zhang, Y., and Shahbazi, A. (2009). "Swine manure solids separation and thermochemical conversion to heavy oil," BioRes. 4(2), 458-470. PDF
Jahan, M. S., Sabina, R., Tasmin, B., Chowdhury, D. A. N., Noori, A., and Al-Maruf, A. (2009). "Effect of harvesting age on the chemical and morphological properties of dhaincha (Sesbania aculeata) and its pulpability and bleachability," BioRes. 4(2), 471-481. PDF
Mattinen, M.-L., Stuijs, K., Suortti, T., Mattila, I., Kruus, K., Willför, S., Tamminen, T., and Vincken, J.-P. (2009). "Modification of lignans by Trametes hirsuta laccase," BioRes. 4(2), 482-496. PDF
Yokota, S, Ohta, T., Kitaoka, T, Ona, T., and Wariishi, H. (2009). "Preparation and characteristics of anionic polyacrylamides containing direct dye with a high affinity for cellulose," BioRes. 4(2), 497-508. PDF
Vynios, D. H., Papaioannou, D. A., Filos, G., Karigiannis, G., Tziala, T., and Lagios, G. (2009). "Enzymatic production of glucose from waste paper," BioRes. 4(2), 509-521. PDF
Dwivedi, U. K., Ghosh, A., and Chand, N. (2009). "Role of PVA modification in improving the sliding wear behavior of bamboo," BioRes. 4(2), 522-528. PDF
Lundquist, K., Langer, V., and Parkås, J. (2009). "The structure and conformation of lignin as judged by X-ray crystallographic investigations of lignin model compounds: Arylglycerol beta-syringyl ethers," BioRes. 4(2), 529-536. PDF
Chi, C., Zhang, Z., Ge, W., and Jameel, H. (2009). "The relationship between two methods for evaluating five-carbon sugars in eucalyptus extraction liquor," BioRes. 4(2), 537-543. PDF
Singh, G., Ahuja, N., Sharma, P., and Capalash, N. (2009). "Response surface methodology for the optimized production of an alkalophilic laccase from gamma-proteobacterium JB," BioRes. 4(2), 544-553. PDF
Treimanis, A., Grinfelds, U., and Skute, M. (2009). "Are the pulp fiber wall surface layers the most resistant ones towards bleaching?" BioRes. 4(2), 554-565. PDF
Mwaikambo, L. Y. (2009). "Tensile properties of alkalised jute fiberes," BioRes. 4(2), 566-588. PDF
Li, Z., Pang, Y., Lou, H., and Qiu, X. (2009). "Influence of lignosulfonates on the properties of dimethomorph water-dispersible granules," BioRes. 4(2), 589-601. PDF
Salmi, J., Nypelö, T., Österberg, M., and Laine, J. (2009). "Layer structures formed by silica nanoparticles and cellulose nanofibrils with cationic polyacrylamide (C-PAM) on cellulose surface and their influence on interactions," BioRes. 4(2), 602-625. PDF
Jonoobi, M., Harun, J., Shakeri, A., Misra, M., and Oksman, K. (2009). "Chemical composition, crystallinity, and thermal degradation of bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofibers," BioRes. 4(2), 626-639. PDF
Liimatainen, H., Haapala, A., Tomperi, J., and Niinimäki, J. (2009). "Fibre floc morphology and dewaterability of a pulp suspension: Role of flocculations kinetics and characteristics of flocculation agents," BioRes. 4(2), 640-658. PDF
Ghosh, S. C., Militz, H., and Mai, C. (2009). "Natural weathering of Scots pine (Pinus sylvestris L.) boards modified with functionalised commercial silicone emulsions," BioRes. 4(2), 659-673. PDF
Zuang, J., Liu, Y., Wu, Z., Sun, Y., and Lin, L. (2009). "Hydrolysis of wheat straw hemicellulose and detoxification of the hydrolysate for xylitol production," BioRes. 4(2), 674-686. PDF
Leschinsky, M., Sixta, H., and Patt, R. (2009). "Detailed mass balances of the autohydrolysis of Eucalyptus globulus at 170 oC," BioRes. 4(2), 687-703. PDF
Jin, F., and Enomoto, H. (2009). "Hydrothermal conversion of biomass into value-added products: Technology that mimics nature," BioRes. 4(2), 704-713. PDF
Ford, E., Popil, R. E., and Kumar, S. (2009). "Breathable water-resistant linerboard coatings by electrospraying application," BioRes. 4(2), 714-729. PDF
Ray, D., Das, M., and Mitra, D. (2009). "Influence of alkali treatment on creep properties and crystallinity of jute fibres," BioRes. 4(2), 730-739. PDF
Tazrouti, N., and Amrani, M. (2009). "Chromium (VI) adsorption onto activated kraft lignin produced from alfa grass (Stipa tenacessima)," BioRes. 4(2), 740-755. PDF
Uysal, B., Kurt, Ş, and Özcan, C. (2009). "Thermal conductivity of laminated veneer lumbers bonded with various adhesives and impregnated with various chemicals," BioRes. 4(2), 756-770. PDF
Pedieu, R., Riedl, B., and Pichette, A. (2009). "Properties of birch outer bark panels reinforced with wood strands in the surface layers," BioRes. 4(2), 771-788. PDF
Sukhbaatar, B., Steele, P. H., and Kim, M. G. (2009). "Use of lignin separated from bio-oil in oriented strand board binder phenol-formaldehyde resins,"BioRes. 4(2), 789-804. PDF
Košíková, B., and Lábaj, J. (2009). "Lignin-stimulated protection of polypropylene films and DNA in cells of mice against oxidation damage," BioRes. 4(2), 805-815. PDF
Han, S., Li, J., Zhu, S., Chen, R., Wu, Y., Zhang, X., and Yu, Z. (2009). "Potential applications of ionic liquids in wood related industries," BioRes. 4(2), 825-849. PDF
Lu, J., Chorney, M., and Peterson, L. (2009). "Sustainable trailer flooring," BioRes. 4(2), 835-849. PDF
Hubbe, M. A., Nanko, H., and McNeal, M. R. (2009). "Retention aid polymer interactions with cellulosic surfaces and suspensions: A review," BioRes. 4(2), 850-906. PDF

Features of issue no. 4(1), Feb. 2009:

Hubbe, M. A. (2009). "'Retro-,' An emerging prefix for future technological development?" BioRes. 4(1), 1-2.
Dammström, S., Salmén, L., and Gatenholm, P. (2009). "On the interactions between cellulose and xylan, a biomimetic simulation of the hardwood cell wall," BioRes. 4(1), 3-14. PDF
Johansson, C., Lundquist, K., and Theliander, H. (2009). "Fractionation of processed spruce wood obtained in the production of ethanol," BioRes. 4(1), 15-25. PDF
Gustafsson, C., and Richards, T. (2009). "Pyrolysis kinetics of washed precipitated lignin," BioRes. 4(1), 26-37. PDF
Tang, L.-Q., Ni, W., Zhao, H.-Y., Xu, Q., and Jiao, J.-X. (2009). "Preparation of macroporous TiO2 by starch microspheres template with assistance of supercritical CO2,"BioRes. 4(1), 38-48. PDF
Müller, G., Schöpper, C., Vos, H., Kharazipou, A., and Polle, A. (2009). "FTIR-ATR spectroscopic analysis of chages in wood properties during particle- and fibreboard production of hard- and softwood trees," BioRes. 4(1), 49-71. PDF
Košíková, B., Sláviková, E., and Lábaj, J. (2009). "Affinity of lignin preparations towards genotoxic compounds," BioRes. 4(1), 72-79. PDF
Nada, A. M. A., Abd El-Mongy, S., and Abd El-Sayed, E. S. (2009). "Effect of different treatments on cellulose toward carboxylation and its application for metal ion absorption," BioRes. 4(1), 80-93. PDF
Saarinenn, T., Orelma, H., Grönqvist, S., Andberg, M., Holappa, S., and Laine, J. (2009). "Adsorption of different laccases on cellulose and lignin surface," BioRes. 4(1), 94-110. PDF
Bledzki, A. K., Lucka, M., Al Mamun, A., and Michalski, J. (2009). "Biological and electrical resistance of acetylated flax fibre reinforced polypropylene composites," BioRes. 4(1), 111-125. PDF
Pulkkinen, I., Fiskari, J., and Alopaeus, V. (2009). "The effect of hardwood fiber morphology on the hygroexpansivity of paper," BioRes. 4(1), 126-141. PDF
Chalamcherla, V., Maringanti A., S., Muvva, V. L., Mangamoori, L. N., and Ramireddy, M. R. (2009). "Use of lignocellulolytic mutants of Pleurotus ostreatus in ruminant feed formulations," BioRes. 4(1), 142-154. PDF
Nazir, A., Soni, R., Saini, H. S., Manhas, R. K., and Chadha, B. S. (2009). "Regulation of expression of multiple beta-glucosidases of Aspergillus terreus and their purificaiton and characterization," BioRes. 4(1), 155-171. PDF
Rutkowska, E. W., Wollboldt, P., Zuckerstätter, G., Weber, H. K.., and Sixta, H. (2009). "Characterization of structural changes in lignin during continuous batch kraft cooking of Eucalyptus globulus," BioRes. 4(1), 172-193. PDF
Tarmian, A., and Azadfallah, M. (2009). "Variation of cell features and chemical composition in spruce consisting of opposite, normal, and compression wood," BioRes. 4(1), 194-204. PDF
Uraki, Y., Tamai, Y., Ogawa, M., Gaman, S., and Tokura, S. (2009). "Preparation of activated carbon from peat," BioRes. 4(1), 205-213. PDF
Ekhtera, M. H., Azadfallah, M., Bahrami, M., and Mohammadi-Rovshandeh, J. (2009). "Comparative study of pulp and paper properties of canola stalks prepared by using dimethyl formamide or diethylene glycol," BioRes. 4(1), 214-233. PDF
Yokota, S., Matsuo, K., Kitaoka, T., and Wariishi, H. (2009). "Retention and paper-strength characteristics of anionic polyacarylamides conjugated with carbohydrate-binding modules," BioRes. 4(1), 234-244. PDF
Enayati, A. A., Hamzeh, Y., Mirshokraie, S. A., and Molaii, M. (2009). "Papermaking potential of canola stalks," BioRes. 4(1), 245-256. PDF
Pandey, K. K., Jayashree, and Nagaveni, H. C. (2009). "Study of dimensional stability, decay resistance, and light stability of phenylisothiocyanate modified rubberwood," BioRes. 4(1), 257-267.
Patel, H., Gupte, A., and Gupte, S. (2009). "Effect of different culture conditions and inducers on production of laccase by a basidiomycete fungal isolate Pleurotus ostreatus HP-1 under solid state fermentation," BioRes. 4(1), 268-284.
Valchev, I., Nenkova, S., Tsekova, P., and Lasheva, V. (2009). "Use of enzymes in hydrolysis of maize stalks," BioRes. 4(1), 285-291.
Singha, A. S., and Thakur, V. K. (2009). "Study of mechanical properties of urea-formaldehyde thermosets reinformed by pine needle powder," BioRes. 4(1), 292-308.
Dehkhoda, A., Brandberg, T., and Taherzadeh, M. J. (2009). "Comparison of vacuum and high pressure evaporated wood hydrolyzate for enthanol production by repeated fed-batch using flocculating Saccharomyces cerevisiae," BioRes. 4(1), 309-320. PDF
Liimatainen, H., Haavisto, S., Haapala, A., and Niinimäki, J. (2009). "Influence of adsorbed and dissolved carboxymethyl cellulose on fibre suspension dispersing, dewaterability, and fines retention," BioRes. 4(1), 321-340. PDF
Gronowska, M, Joshi, S., and MacLean, H. L. (2009). "A review of U.S. and Canadian biomass supply studies," BioRes. 4(1), 341-369. PDF
Esteves, B. M., and Pereira, H. M. (2009). "Wood modification by heat treatment: A review," BioRes. 4(1), 370-404. PDF
Hubbe, M. A., Chen, H., and Heitmann, J. A. (2009). "Permeability reduction phenomena in packed beds, fiber mats, and wet webs of paper exposed to flow of liquids and suspensions: A review," BioRes. 4(1), 405-451. PDF

Features of issue no. 3(4), Nov. 2008:

Lucia, L. A. (2008). "Lignocellulosic biomass: A potential feedstock to replace petroleum," BioRes. 3(4), 981-982.
Somboon, P., Nieminen, K., and Paulapuro, H. (2008). "Finite element analysis of the fatigue behavior of wood cell walls," BioRes. 3(4), 983-994. PDF
Zanini, S., Canevali, C., Orlandi, M., Tolppa, E.-L., Zoia, L., Riccardi, C., and Morazzoni, F. (2008). "Radical formation on CTMP fibers by argon plasma treatments and related lignin chemical changes," BioRes. 3(4), 995-1009. PDF
Kalia, S., Sharma, S., Bhardwaj, B., Kaith, B. S.., and Singha, A. S. (2008). "Potential use of graft copolymers of mercerized flax as filler in polystyrene composite materials,"BioRes. 3(4), 1010-1019. PDF
Millati, R., Karimi, K., Edebo, L., Niklasson, C., and Taherzadeh, M. J. (2008). "Ethanol production from xylose and wood hydrolyzate by Mucor indicus at different aeration rates," BioRes. 3(4), 1020-1029. PDF
Yokota, S., Matsuo, K., Kitaoka, T., and Wariishi, H. (2008). "Specific interaction acting at a cellulose-binding domain/cellulose interface for papermaking application," BioRes. 3(4), 1030-1041. PDF
Barbosa, E. S., Perrone, D., Amaral Vendramini, A. L., and Ferriera Leite, S. G. (2008). "Vanillin production by Phanerochaete chrysosporium grown on green coconut agro-industrial husk in solid state fermentation," BioRes. 3(4), 1042-1050. PDF
Das, M., and Chakrabarty, D. (2008). "Thermogravimetric analysis and weathering study by water immersion of alkali-treated bamboo strips," BioRes. 3(4), 1051-1062. PDF
Rutledge, A. R., Venditti, R. A., Pawlak, J. J., Patel, S., and Cibils, J. L. (2008). "Carbonized starch microcellular foam-cellulose fiber composite structures," BioRes. 3(4), 1063-1080. PDF
Kovur, S. K., Schenzel, K. C., Grimm, E., and Diepenbrock, W. (2008). "Characterization of refined hemp fibers using NIR FT Raman micro spectroscopy and environmental scanning electron microscopy,"BioRes. 3(4), 1081-1091. PDF
Quintana, G. C., Rocha, G. J. M., Gonçalves, A. R., and Velásquez, J. A. (2008). "Evaluation of heavy metal removal by oxidised lignins in acid media from various sources," BioRes. 3(4), 1092-1102. PDF
Porankiewicz, B. (2008). "Theoretical method for prediction of the cutting edge recession during milling wood and secondary wood products,"BioRes. 3(4), 1103-1117. PDF
Montplaisir, D., Daneault, C., and Chabot, B. (2008)."Surface composition of grafted thermomechanical pulp through XPS measurement," BioRes. 3(4), 1118-1129. PDF
Teacă, C. A., and Bodîrlău, R. (2008). "Assessment of toxicity of industrial wastes using crop plant assays," BioRes. 3(4), 1103-1145. PDF
Carletto, R. A., Chimirri, F., Bosco, F., and Ferrero, F. (2008). "Adsorption of Congo Red dye on hazelnut sheets and degradation with Phanerochaete chrysosporium," BioRes. 3(4), 1146-1155. PDF
Mellouk, H., Khezami, L., Rezzoug, S.-A., and Capart, R. (2008). "Total valorisation of red cedar (Thuja Plicata) sawmills wastes. Isolation of extractives and production of activated carbon from solid residue," BioRes. 3(4), 1156-1172. PDF
Singha, A. S., and Thakur, V. K. (2008). "Fabrication and study of lignocellulosic Hibiscus sabdariffa fiber reinforced polymer composites," BioRes. 3(4), 1173-1186. PDF
Sasso, C., Fenoll, M., Stephan, O., and Beveventi, D. (2008). "Use of wood derivatives as doping / dispersing agents in the preparation of polypyrrole aqueous dispersions,"BioRes. 3(4), 1187-1195. PDF
El-Saied, H., El-Diwany, A. I., Basta, A H., Atwa, N. A., and El-Ghwas, D. E. (2008). "Production and characterization of economical bacterial cellulose," BioRes. 3(4), 1196-1217. PDF
Huber, P., Carré, B., and Petit-Conil, M. (2008). "The influence of TMP fibre flexibility on flocculation and formation," BioRes. 3(4), 1218-1227. PDF
Chand, N., and Jhod, B. D. (2008). "Mechanical, electrical, and thermal properties of maleic anhydride modified rice husk filled PVC composites," BioRes. 3(4), 1228-1243. PDF
Winandy, J., and Cai, Z. (2008). "Potential of using anaerobically digested bovine biofiber as a fiber source for wood composites," BioRes. 3(4), 1244-1255. PDF
Spelter, H., Winandy, J., and Zauche, T. (2008). "Anaerobically digested bovine biofiber as a source of fiber for particleboard manufacturing: An economic analysis," BioRes. 3(4), 1256-1266. PDF
Ndazi, B. S., Nyahumwa, C., and Tesha, J. (2008). "Chemical and thermal stability of rice husks against alkali treatment," BioRes. 3(4), 1267-1277. PDF
Solár, R., Mamoň, M., Dibdiaková, J., Reinprecht, L, Pánek, M., and Hudec, J. (2008). "Effect of biotic and abiotic pretreatments of hornbeam wood on its properties interesting from viewpoint of pulping in alkaline media. Part 1: Physical Properties," BioRes. 3(4), 1278-1290. PDF
Solár, R., Kačík, F., Reinprecht, L, Laurová, M., Geffertová, J., and Dibdiaková, J. (2008). "Effect of biotic and abiotic pretreatments of hornbeam wood on its properties interesting from viewpoint of pulping in alkaline media. Part 2: Chemical alterations," BioRes. 3(4), 1291-1302. PDF
Ghosh, S. C., Militz, H., and Mai, C. (2008). "Decay resistance of treated wood with functionalised commercial silicones," BioRes. 3(4), 1303-1314. PDF
Ahola, S., Myllytie, P., Österberg, M., Teerinen, T., and Laine, J. (2008). "Effect of polymer adsorption on cellulose nanofibril water binding capacity and aggregation," BioRes. 3(4), 1315-1328. PDF
Labbé, N., Ye, X. P., Franklin, J. A., Womac, A. R., Tyler, D. D., and Rials, T. G. (2008). "Analysis of switchgrass characteristics using near infrared spectroscopy," BioRes. 3(4), 1329-1348. PDF
Stoutenburg, R. M., Perrotta, J. A., Amidon, T. E., and Nakas, J. P. (2008). "Ethanol production from a membrane purified hemicellulosic hydrolysate drived from sugar maple by Pichia stipitis NRRL Y-7124," BioRes. 3(4), 1349-1358. PDF
Jahan, M. S., Rawsan, S., Chowdhury, D. A. N., and Al-Maruf, A. (2008). "Alternative pulping process for producing dissolving pulp from jute,"BioRes. 3(4), 1359-1370. PDF
Malutan, T., Nicu, R., and Popa, V. I. (2008). "Lignin modification by expoxidation," BioRes. 3(4), 1371-1376. PDF
Dhiman, S. S., Sharma, J., and Battan, B. (2008). "Industrial applications and future prospects of microbial xylanases: A review," BioRes. 3(4), 1377-1402. PDF
Ioelovich, M. (2008). "Cellulose as a nanostructured polymer: A short review," BioRes. 3(4), 1403-1418. PDF
Hubbe, M. A., and Rojas, O. J. (2008). "Colloidal stability and aggregation of lignocellulosic materials in aqueous suspension: A review," BioRes. 3(4), 1419-1491. PDF

Features of issue no. 3(3), Aug. 2008:

Cheng, S., and Zhu, S. (2008). "Use of lignocellulosic materials for a sustainable chemical industry," BioRes. 3(3), 666-667.
Lucia, L. A., and Hubbe, M. A. (2008). "Book review: 'Materials, chemicals & energy from forest biomass' ," BioRes. 3(3), 668-669.

PDF
Martín, C., Marcet, M., and Thomsen, A. B. (2008). "Comparison between wet oxidation and steam explosion as pretreatment methods for enyzmatic hydrolysis of sugarcane bagasse," BioRes. 3(3), 670-683.
Porankiewicz, B., and Wieloch, G. (2008). "Sanding of Fagus silvatica L. wood perpendicularly to the grains," BioRes. 3(3), 684-700. PDF
Lima, C. F., Barbosa, L. C. A., Marcelo, C. R., Silvério, F. O., and Colodette, J. L. (2008). "Comparison between analytical pyrolysis and nitrobenzene oxidation for determination of syringyl/guaiacyl ratio in Eucalyptus spp. lignin," BioRes. 3(3), 701-712.
Xu, C., Willför, S., and Holmbom, B. (2008). "Rheological properties of mixtures of spruce galactoglucomannans and konjac glucomannan or some other polysaccharides,"BioRes. 3(3), 713-730. PDF
Patyakin, V. I., Sugaipov, U. U., Birman, A. R., Bazarov, S. M., Pilshikov, Y. N., Spitsyn, A. A., and Mettee, H. D. (2008). "Mechanical and chemical modification of wood materials - Compressed wood and oxidized charcoal," BioRes. 3(3), 731-744. PDF
Porankiewicz, B., Dolata, A., and Wieloch, G. (2008). "Cutting force during the turning of wood from black locust," BioRes. 3(3), 745-757. PDF
Imam, S. H., Chiou, B.-S., Woods, D., Shey, J., Glenn, G. M., Orts, W. J., Narayan, R., Avena-Bustillos, R. J., McHugh, T. H., Pantoja, A., and Bechtel, P. J. (2008). "Starch/pulp-fiber based packaging foams and cast films containing Alaskan fish by-products (waste)," BioRes. 3(3), 758-773. PDF
Ni, W., Xu, Q., Jiao, J.-X., Liu, X., and Ren, C. (2008). "Hierarchically porous Fe2O3 and Fe2O3/SiO2 composites prepared by cypress tissue template with assistance of supercritical CO2," BioRes. 3(3), 774-788. PDF
Bodîrlău, R., Teacă, C. A., and Spiridon, I. (2008). "Chemical modification of beech wood: Effect on thermal stability," BioRes. 3(3), 789-800. PDF
Lei, X., Lin, L., and Li, K. (2008). "Effect of xylanase pretreatment of wood chips on fiber separation in the CTMP refining process," BioRes. 3(3), 801-815. PDF
Jahan, M. S., Ahsan, L., Noori, A., and Quaiyyum, M. A. (2008). "Process for the production of dissolving pulp from Trema orientalis (nalita) by prehydrolysis kraft and soda-ethylenediamine (EDA) process,"BioRes. 3(3), 816-828. PDF
Keheyan, Y. (2008). "PY/GC/MS analysis of historical papers," BioRes. 3(3), 829-837. PDF
Porankiewicz, B., Iskra, P., Jóźwiak, K, Tanaka, C., and Zborowski, W. (2008). "High speed steel tool wear after wood milling in the presence of high temperature tribochemical reactions,"BioRes. 3(3), 838-858. PDF
Georgieva, D., Nenkova, S., Herzog, M., and Behrendt, G. (2008). "High mechanical strength wood polymer composites by use of a new polyurethane binder system," BioRes. 3(3), 859-869. PDF
Han, Y., Law, K.-N., and Lanouette, R. (2008). "Modification of jack pine TMP long fibers by alkaline peroxide - Part 1. Chemical characteristics of fibers and spent liquor," BioRes. 3(3), 870-880. PDF
Rabelo, M. S., Colodette, J. L., Sacon, V. M., Silva, M. R., and Azevedo, M. A. B. (2008). "Molybdenum catalyzed acid peroxide bleaching of eucalyptus kraft pulp," BioRes. 3(3), 881-897. PDF
Fernandes, S., Murray, P. G., and Tuohy, M. G. (2008). "Enzyme systems from the thermophilic fungusTalaromyces emersonii for sugar beet bioconversion," BioRes. 3(3), 898-909. PDF
Esteban, L. S., Ciria, P., and Carrasco, J. E. (2008). "An assessment of relevant methodological elements and criteria for surveying sustainable agriculcural and forestry biomass byproducts for energy purposes," BioRes. 3(3), 910-928 PDF
Hubbe, M. A.., Rojas, O. J., Lucia, L. A., and Sain, M. (2008). "Cellulosic nanocomposites: A review,"BioRes. 3(3), 929-980. PDF

Features of issue no. 3(2), May 2008:

Hubbe, M. A. (2008). "Are lignocellulosic resources too valuable to burn?" BioRes. 3(2), 295-296.
Sun, Y., Lin, L., Deng, H., Li, J., He, B., Sun, R., and Ouyang, P. (2008). "Structural changes of bamboo cellulose in formic acid," BioRes. 3(2), 297-315. PDF
Quintero, O. L., Amicarelli, A. A., di Sciascio, F., and Scaglia, G. (2008). "State estimation in alcoholic continuous fermentation of Zymomonas mobilus using recursive Bayesian filtering: A simulation approach," BioRes. 3(2), 316-334. PDF
Giese, E. C., Dekker, R. F. H., and Barbosa, A. M. (2008). "Orange bagasse as substrate for the production of pectinase and laccase by Botryosphaeria rhodina MAMB-05 in submerged and solid state fermentation," BioRes. 3(2), 335-345. PDF
Deka, M., and Petrič, M. (2008). "Photo-degradation of water borne acrylic coated modified and non-modified wood during artificial light exposure," BioRes. 3(2), 346-362. PDF
Xu, C., Su, H., and Cang, D. (2008). "Liquefaction of corn distillers dried grains with solubles (DDGS) in hot-compressed phenol," BioRes. 3(2), 363-382. PDF
Ekhtera, M. H., Rezayati Charani, P., Ramezani, O., and Azadfallah, M. (2008). "Effects of poly-aluminum chloride, starch, alum, and rosin on the rosin sizing, strength, and microscopic appearance of paper prepared from old corrugated container (OCC) pulp," BioRes. 3(2), 383-402. PDF
El-Sharkawy, K., Haavisto, S., Koskenkely, K., and Paulapuro, H. (2008). "Effect of fiber flocculation and filling design on refiner loadability and refining characteristics," BioRes. 3(2), 403-424. PDF
Porankiewicz, B., and Wieloch, G. (2008). "Drill wear during the boring of particle board: A multi-factor analysis including effects of mineral contaminants," BioRes. 3(2), 425-436. PDF
Brännström, M., Manninen, J., and Oja, J. (2008). "Predicting the strength of sawn wood by tracheid laser scattering," BioRes. 3(2), 437-451. PDF
Dawson, L., and Boopathy, R. (2008). "Cellulosic ethanol production from sugarcane bagassed without enzymatic saccharification," BioRes. 3(2), 452-460. PDF
Ni, W., Chen, J., and Xu, Q. (2008). "Synthesis and characterization of hierarchically porous silica with poplar tissue as template with assistance of supercritical CO2," BioRes. 3(2), 461-476. PDF
Ander, P., Hildén, L., and Daniel, G. (2008). "Cleavage of softwood kraft pulp fibers by HCl and cellulases," BioRes. 3(2), 477-490. PDF
Peters, J., Fischer, K., and Fischer, S. (2008). "Characterization of emissions from thermally modified wood and their reduction by chemical treatment," BioRes. 3(2), 491-502. PDF
Singh, S. P. (2008). "A comparison of different methods of paper surface smoothness evaluation," BioRes. 3(2), 503-516. PDF
Kocaefe, D., Poncsak, S., and Boluk, Y. (2008). "Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen," BioRes. 3(2), 517-537. PDF
Nada, A. M. A., Kassem, N. F., and Mohamed, S. H. (2008). "Characterization and properties of ion exchangers produced from lignin precipitated after peroxyacid pulping," BioRes. 3(2), 538-548. PDF
Mattinen, M.-L., Suortti, T., Gosselink, R., Argyropoulos, D. S., Evtuguin, D., Suurnäkki, A., de Jong, E., and Tamminen, T. (2008). "Polymerization of different lignins by laccase," BioRes. 3(2), 549-565. PDF
Khambalkar, V. P., Karale, D. S., Gadge, S. R., and Dahatonde, S. B. (2008). "Assessment of bioenergy potential of a rural village for self energy generation," BioRes. 3(2), 566-575. PDF
Liebert, T., and Heinze, T. (2008). "Interactions of ionic liquids with polysaccharides. 5. Solvents and reaction media for the modification of cellulose," BioRes. 3(2), 576-601. PDF
Frybort, S. Mauritz, R., Teischinger, A., and Müller, U. (2008). "Cement bonded composites - A mechanical review," BioRes. 3(2), 602-626. PDF
Hubbe, M. A., Pawlak, J. J., and Koukoulas, A. A. (2008). "Paper's appearance: A review," BioRes. 3(2), 627-665. PDF

Features of issue no. 3(1), February 2008:

<
Pawlak, J. J. (2008). "A sustainable economy," BioRes. 3(1), 1-2.
Wang, H., Li, B., and Shi, B. (2008). "Preparation and surface acid-base properties of porous cellulose," BioRes. 3(1), 3-12. PDF
Malutan, T., Nicu, R., and Popa, V. I. (2008). "Contribution to the study of hydroxymethylation reaction of alkali lignin," BioRes. 3(1), 13-20. PDF
Zoia, L., Canevali, C., Orlandi, M., Tolppa, E.-L., Sipila, J., and Morazzoni, F., "Radical formation on TMP fibers and related lignin chemical changes," BioRes. 3(1), 21-33. PDF
Kontturi, E., Mitikka-Eklund, M., and Vuorinen, T. (2008). "Strength enhancement of a fiber network by carboxymethyl cellulose during oxygen delignification of kraft pulp," BioRes. 3(1), 34-45. PDF
Nada, A.-A. M. A., Alkady, M. Y., and Fekry, H. M. (2008). "Synthesis and characterization of grafted cellulose for use in water and metal ions sorption," BioRes. 3(1), 46-59. PDF
Ebringerová, A., Hromádková, Z., Košťálová, Z., and Sasinková, V. (2008). "Chemical valorization of agricultural by-products: Isolation and characterization of xylan-based antioxidants from almond shell biomass," BioRes. 3(1), 60-70. PDF
Hromádková, Z., Malovíková, A., Mozeš, Š., Sroková, I., and Ebringerová, A. (2008). "Hydrophobically modified pectates as novel functional polymers in food and non-food applications," BioRes. 3(1), 71-78. PDF
Heinze, T., Pfeifer, A., and Petzold, K. (2008). "Functionalization pattern of tert-butyldimethyl-silyl cellulose evaluated by NMR spectroscopy," BioRes. 3(1), 79-90. PDF
Csóka, L., Lorincz, A., and Winkler, A. (2008). "Sonochemically modified wheat straw for pulp and papermaking to increase its economical performance and reduce environmental issues," BioRes. 3(1), 91-97. PDF
Galgut, P. N. (2008). "Radiographic observations on the use of two different regeneration materials in a single subject: Case study," BioRes. 3(1), 98-107. PDF
Talebnia, F., Pourbafrani, M., Lundin, M., and Taherzadeh, M. J. (2008). "Optimization study of citrus wastes saccharification by dilute-acid hydrolysis," BioRes. 3(1), 108-122. PDF
Montoneri, E., Boffa, V., Quagliotto, P., Mendichi, R., Chierotti, M. R., Gobetto, R., and Medana, C. (2008). "Humic acid-like matter isolated from green urban wastes. Part 1. Structure and surfactant properties," BioRes. 3(1), 123-141. PDF