|
Cover images:
|
Loading
Research Articles
for BioResources Online Journal
Research articles that appeared in the inaugural (July 2006) issue of BioResources are shown below. If you are interested in submitting an article to BioResources, you are required to use a template. Please start by reading the "Author Instructions" (see link at left).
Vol. (issue), Year |
Pages |
Item |
|
1(1),
2006 |
|
Freire, C. S. R., Pinto, P. C. R., Santiago, A. S., Silvestre, A. J. D., Evtuguin, D. V., and Pascoal Neto, C. (2006). "Comparative study of lipophilic extractives of hardwoods and corresponding ECF bleached kraft pulps," BioRes. 1(1), 3-17. |
|
1(1),
2006 |
|
Ghatora, S. K., Chadha, B. S., Badhan, A. K., Saini, H. S., and Bhat, M. K. (2006). "Identification and characterization of diverse xylanases from thermophilic and thermotolerant fungi," BioRes. 1(1), 18-33. |
|
1(1),
2006 |
|
Bajpai, P., Anand, A., Sharma, N., Mishra, S. P., Bajpai, P. K., and Lachenal, D. (2006). "Enzymes improve ECF bleaching of pulp," BioRes. (1), 34-44. |
|
1(1),
2006 |
|
Shatalov, A. A., and Pereira, H. (2006). "Papermaking fibers from giant reed (Arundo donax L.) by advanced ecologically friendly pulping and bleaching technologies," BioRes. 1(1), 45-61. |
|
1(1),
2006 |
|
Papadopoulos, A. N. (2006). "Decay resistance of cement-bonded oriented strand board," BioRes. 1(1), 62-66. |
|
1(1),
2006 |
|
Papadopoulos, A. N. (2006). "Chemical modification of pine wood with propionic anhydride: Effect on decay resistance and sorption of water vapour," BioRes. 1(1), 67-74. |
|
1(1),
2006 |
|
Lucia, L. A., Willett, B., and Korppi-Tommola, J. (2006). "Laser-induced plasma emission spectroscopy (LIPS): A useful analytical tool for the surface chemical characterization of coated paper materials," BioRes. 1(1), 75-92. |
|
1(2),
2006 |
|
Janardhnan, S., and Sain, M. (2006). "Isolation of cellulose microfibrils - An enzymatic approach," BioRes. 1(2), 176-188. |
|
1(2),
2006 |
189 -
200
|
Wu, B., Zhao, Y., and Gao, P. J. (2006). "A new approach to measurement of saccharifying capacities of crude cellulase," BioRes. 1(2), 189-200 |
|
1(2),
2006 |
201 -
208
|
Papadopoulos, A. N. (2006). "Property comparisons and bonding efficiency of UF and PMDI bonded particleboards as affected by key process variables," BioRes. 1(2), 201-208. |
|
1(2),
2006 |
209 -
219
|
Dobreva, D., Nenkova, S., and Vasileva, St. (2006). "Morphology and mechanical properties of polypropylene-wood flour composites," BioRes. 1(2), 209-219. |
|
1(2),
2006 |
220 -
232
|
Abdul Khalil, H. P. S., Siti Alwani, M., and Mohd Omar, A. K. (2006). "Chemical composition, anatomy, lignin distribution, and cell wall structure of Malaysian plant waste fibers," BioRes. 1(2), 220-232. |
|
1(2),
2006 |
233 -
247
|
Gruver, T. M., and Brown, N. R. (2006). "Penetration and performance of isocyanate wood binders on selected wood species," BioRes. 1(2), 233-247. |
|
1(2),
2006 |
|
Liang, L., Mao, Z., Li, Y., Wan, C., Wang, T., Zhang, L., and Zang, L. (2006). "Liquefaction of crop residues for polyol production," BioRes. 1(2), 248-256. |
|
1(2),
2006 |
257 -
269 |
Huang, C. B., Jeng, R., Sain, M., Saville, B. A., and Hubbes, M. (2006). "Production, characterization, and mechanical properties of starch modified by Ophiostoma spp.," BioRes. 1 (2), 257-269. |
|
2(1),
2007 |
3-19 |
Bi, W., and Coffin, D. W. (2007). "Racking strength of paperboard based sheathing materials," BioRes. 2(1), 3-19. |
|
2(1),
2007 |
20-33 |
Lee, J. M., Heitmann, J. A., and Pawlak, J. J. (2007). "Rheology of carboxymethyl cellulose solutions treated with cellulases," BioRes. 2(1), 20-33. |
|
2(1)
2007 |
34-40 |
Boeva-Spiridonova, R., Petkova, E., Georgieva, N., Yotova, L., and Spiridonov, I. (2007). "Utilization of a chemical-mechanical pulp with improved properties from poplar wood in the composition of packing papers," BioRes. 2(1), 34-40 |
|
2(1)
2007 |
41-57 |
Bodirlau, R., Spiridon, I., and Teaca, C. A. (2007). "Chemical investigation on wood tree species in a temperate forest, east-northern Romania," BioRes. 2(1), 41-57. |
|
2(1)
2007 |
58-65 |
Betcheva, R. I., Hadzhiyska, H. A., Georgieva, N. V., and Yotova, L. K. (2007). "Biobleaching of flax by degradation of lignin with laccase," BioRes. 2(1), 58-65. |
|
2(1)
2007 |
66-81 |
Oh, M., and Tshabalala, M. A. (2007). "Pelletized ponderosa pine bark for adsorption of toxic heavy metals from water," BioRes. 2(1), 66-81. |
|
2(1)
2007 |
82-90 |
Marshall, W. E., Wartelle, L. H., and Akin, D. E. (2007). "Flax shive as a sources of activated carbon for metals remediation," BioRes. 2(1), 82-90. |
|
2(1)
2007 |
91-105 |
Subramanian, R., Fordsmand, H., and Paulapuro, H. (2007). "Precipitated calcium carbonate (PCC) - cellulose composite fillers: Effects of PCC particle structure on the production and properties of uncoated fine paper," BioRes. 2(1), 91-105. |
|
2(2)
2007
|
148-156 |
Hervillard, T., Cao, Q., and Laborie, M.-P. G. (2007). "Improving water resistance of wheat straw-based medium density fiberboards bonded with aminoplastic and phenolic resins," BioRes. 2(2), 148-156. |
|
2(2)
2007 |
157-168 |
Siverio, F. O., Barbosa, L. C. A., Maltha, C. R. A., Silvestre, A. J. D., Pilo-Veloso, D., and Gomide, J. L. (2007). "Characterization of lipophilic wood extractives from clones of Eucalyptus urograndis cultivate in Brazil,"BioRes. 2(2), 157-168. |
|
2(2)
2007 |
169-178 |
Parkås, J., Brunow, G., and Lundquist, K. (2007). "Quantitative lignin analysis based on permanganate oxidation," BioRes. 2(2), 169-178. |
|
2(2)
2007 |
179-192 |
Sridach, W., Hodgson, K. T., and Nazhad, M. (2007). "Biodegradation and recycling potential of barrier coated paperboards," BioRes. 2(2), 179-192. |
|
|
193-209 |
Khezami, L., Ould-Dris, A., and Capart, R. (2007). "Activated carbon from thermo-compressed wood and other lignocellulosic precursors," BioRes. 2(2), 193-209. |
|
2(2)
2007 |
210-222 |
Chakraborty, A., Sain, M. M., Kortschot, M. T., and Ghosh, S. B. (2007). "Modeling energy consumption for the generation of microfibres from bleached kraft pulp fibres in a PFI mill," BioRes. 2(2), 210-222. |
|
|
223-234 |
Colodette, J. L., Gomide, J. L., Júnior, D. L., and Pedrazzi, C. (2007). "Effect of pulp delignification degree on fiber line performance and bleaching effluent load," BioRes. 2(2), 223-234. |
|
2(2)
2007 |
235-251 |
Ruelle, J., Yamamoto, H., and Thibaut, B. (2007). "Growth stresses and cellulose structural parameters in tension and normal wood from three tropical rainforest angiosperm species," BioRes. 2(2), 235-251. |
|
2(2)
2007 |
252-264 |
Felissia, F. E., Area, M. C., Barboza, O. M., and Bengoechea, D. I. (2007). "Anti-scaling agents in kraft pulping," BioRes. 2(2), 252-264. |
|
2(2)
2007 |
265-269 |
Alma, M. H., Ertaş, M., Nitz, S., and Kollmannsberger, H. (2007). "Chemical composition and content of essential oil from the bud of cultivated Turkish clove," BioRes. 2(2), 265-269. |
|
2(2)
2007 |
270-283 |
Pérez, J. M., Rodríguez, F., Alonso, M. V., Oliet, M., and Echeverría, J. M. (2007). "Characterization of a novolac resin substituting phenol by ammonium lignosulfonate as filler or extender," BioRes. 2(2), 270-283. |
|
2(2)
2007 |
284-295 |
Altaner, C., Knox, J. P., and Jarvis, M. C. (2007). "In situ detection of cell wall polysaccharides in sitka spruce (Picea sitchensis (Bong.) Carrière) wood tissue," BioRes. 2(2), 284-295. |
|
2(3)
2007 |
334-350 |
Lundquist, K., Parkås, J., Paulsson, M., and Heitner, C. (2007). "Reactions of lignin chromophores of the enal and enone type with sulfite," BioRes. 2(3), 334-350. |
|
2(3)
2007 |
351-362 |
Law, K.-N., Wan Daud, W. R., and Ghazali, A. (2007). "Morphological and chemical nature of fiber strands of oil palm empty-fruit-bunch (OPEFB)," BioRes. 2(3), 351-362. |
|
2(3)
2007 |
363-370 |
Bălaş, A., and Popa, V. I. (2007). "The influence of natural aromatic compounds on the development of Lycopersicon esculentum plantlets," BioRes. 2(3), 363-370. |
|
2(3)
2007 |
371-388 |
Wang, B., and Sain, M. (2007). "The effect of chemically coated nanofiber reinforcement on biopolymer based nanocomposites," BioRes. 2(3), 371-388. |
|
2(3)
2007 |
389-398 |
Yao, R., Qi, B., Deng, S., Liu, N., Peng, S., and Cui, Q. (2007). "Use of surfactants in enzymatic hydrolysis of rice straw and lactic acid production from rice straw by simultaneous saccharification and fermentation," BioRes. 2(3), 389-398. |
|
2(3)
2007 |
399-407 |
Mocchiutti, P., and Zanuttini, M. A. (2007). "Key considerations in the determination of polyelectrolyte concentration by the colloidal titration method," BioRes. 2(3), 399-407. |
|
2(3)
2007 |
408-418 |
Nenkova, S. (2007). "Study of sorption properties of lignin-derived fibrous composites for the remediation of oil polluted receiving waters," BioRes. 2(3), 408-418. |
|
2(3)
2007 |
419-429 |
Qi, B., and Yao, R. (2007). "L-lactic acid production from Lactobacillus casei by solid state fermentation using rice straw," BioRes. 2(3), 419-429. |
|
2(3)
2007 |
430-441 |
Thomas, R., Singh, S. P., and Subrahmanyam, S. V. (2007)."A study on oxygen delignification of melocanna baccifera (muli bamboo) kraft pulp," BioRes. 2(3), 430-441. |
|
2(3)
2007 |
442-458 |
Vainio, A. K., and Paulapuro, H. (2007). "Interfiber bonding and fiber segment activation in paper," BioRes. 2(3), 442-458. |
|
2(3)
2007 |
459-471 |
Parasuraman, P., Singh, R., Bolton, T. S., Omori, S., and Francis, R. C. (2007). "Estimation of hardwood lignin concentrations by UV spectroscopy and chlorine demethylation," BioRes. 2(3), 459-471. |
|
2(4)
2007 |
536-543 |
Tschirner, J., Barsness, J., and Keeler, T. (2007). "Recycling of chemical pulp from wheat straw and corn stover," BioRes. 2(4), 536-543. |
|
2(4)
2007 |
544-559 |
Zhu, J. Y., Scott, C. T., Gleisner, R., Mann, D., Dykstra, D. P., Quinn, G. H., and Edwards, L. L. (2007). "Mill demonstration of TMP production from forest thinnings: Pulp quality, refining energy, and handsheet properties," BioRes. 2(4), 544-559. |
|
2(4)
2007 |
560-571 |
Chauhan, V. S., Singh, S. P., and Bajpai, P. K. (2007). "Fiber loading of hardwood pulp by in-situ precipitation of aluminosilicate," BioRes. 2(4), 560-571. |
|
2(4)
2007 |
572-582 |
Shulga, G., Betkers, T., Shakels, V., Neiberte, B., Verovkins, A., Brovkina, J., Belous, O., Ambrazaintene, D., and Žukauskaite, A. (2007). "Effect of the modification of lignocellulosic materials with a lignin-polymer complex on their mulching properties," BioRes. 2(4), 572-582. |
|
2(4)
2007 |
583-589 |
Laka, M., and Chernyavskaya, S. (2007). "Obtaining microcrystalline cellulose from softwood and hardwood pulp," BioRes. 2(4), 583-589. |
|
2(4)
2007 |
590-597 |
Langer, V., Lundquist, K., and Parkås, J. (2007). "The stereochemistry and conformation of lignin as judged by X-ray crystallographic investigations of lignin model compounds: Arylglycerol beta-guaiacyl ethers," BioRes. 2(4), 590-597. |
|
2(4)
2007 |
598-604 |
Xie, J., Feng, L., Xu, N., Zhu, G., Yang, J., Xu, X., and Fu, S. (2007). "Studies on the fusion of ligninolytic ezyme cDNAs and their expression," BioRes. 2(4), 598-604. |
|
2(4)
2007 |
605-615 |
Riedlinger, D. A., Sun, N., and Frazier, C. E. (2007). "Tg as an index of conversion in PMDI-impregnated wood," BioRes. 2(4), 605-615. |
|
2(4)
2007 |
616-629 |
da Silva, T. A., Mocchiutti, P., Zanuttini, M. A., and Ramos, L. P. (2007). "Chemical characterization of pulp components in unbleached softwood kraft fibers recycled with the assistance of laccase/HBT system," BioRes. 2(4), 616-629. |
|
2(4)
2007 |
630-637 |
Bianchini, R., Catelani, G., Frino, E., Isaad, J., and Rolla, M. (2007). "Lactose to naturalize textile dyes," BioRes. 2(4), 630-637. |
|
2(4)
2007 |
638-651 |
Saarimaa, V. J., Pranovich, A. V., Sundberg, A. C., and Holmbom, B. R. (2007). "Isolation of pectic acids from bleached TMP water and aggregation of model and TMP pectic acids by calcium," BioRes. 2(4), 638-651. |
|
2(4)
2007 |
652-670 |
Lindfors, J., Salmi, J., Laine, J., and Stenius, P. (2007). "AKD and ASA model surfaces: Preparation and characterization," BioRes. 2(4), 652-670. |
|
2(4)
2007 |
671-681 |
Porankiewicz, B., Bermudez, J. C., and Tanaka, C. (2007). "Cutting forces by peripheral cutting of low density wood species," BioRes. 2(4), 671-681. |
|
2(4)
2007 |
682-692 |
Yang, Q., Zhan, H., Wang, S., Fu, S., and Li, K. (2007). "Bio-modification of eucalyptus chemithermo-mechanical pulp with different white-rot fungi," BioRes. 2(4), 682-692. |
|
2(4)
2007 |
693-698 |
Dwivedi, U. K., Ghosh, A., and Chand, N. (2007). "Abrasive wear behaviour of bamboo (dendrocalamus strictus) powder filled polyester composites," BioRes. 2(4), 693-698. |
|
2(4)
2007 |
699-706 |
Dobele, G., Urbanovich, I., Volpert, A., Kampars, V. and Samulis, E. (2007). "Fast pyrolysis - Effect of wood drying on the yield and properties of bio-oil," BioRes. 2(4), 699-706. |
|
3(1)
2008 |
3-12 |
Wang, H., Li, B., and Shi, B. (2008). "Preparation and surface acid-base properties of porous cellulose," BioRes. 3(1), 3-12. |
|
3(1)
2008 |
13-20 |
Malutan, T., Nicu, R., and Popa, V. I. (2008). "Contribution to the study of hydroxymethylation reaction of alkali lignin," BioRes. 3(1), 13-20. |
|
3(1)
2008 |
21-33 |
Zoia, L., Canevali, C., Orlandi, M., Tolppa, E.-L., Sipila, J., and Morazzoni, F., "Radical formation on TMP fibers and related lignin chemical changes," BioRes. 3(1), 21-33. |
|
3(1)
2008 |
34-45 |
Kontturi, E., Mitikka-Eklund, M., and Vuorinen, T. (2008). "Strength enhancement of a fiber network by carboxymethyl cellulose during oxygen delignification of kraft pulp," BioRes. 3(1), 34-45. |
|
3(1)
2008 |
46-59 |
Nada, A.-A. M. A., Alkady, M. Y., and Fekry, H. M. (2008). "Synthesis and characterization of grafted cellulose for use in water and metal ions sorption," BioRes. 3(1), 46-59. |
|
3(1)
2008 |
60-70 |
Ebringerová, A., Hromádková, Z., Košťálová, Z., and Sasinková, V. (2008). "Chemical valorization of agricultural by-products: Isolation and characterization of xylan-based antioxidants from almond shell biomass," BioRes. 3(1), 60-70. |
|
3(1)
2008 |
71-78 |
Hromádková, Z., Malovíková, A., Mozeš, Š., Sroková, I., and Ebringerová, A. (2008). "Hydrophobically modified pectates as novel functional polymers in food and non-food applications," BioRes. 3(1), 71-78. |
|
3(1)
2008 |
79-90 |
Heinze, T., Pfeifer, A., and Petzold, K. (2008). "Functionalization pattern of tert-butyldimethyl-silyl cellulose evaluated by NMR spectroscopy," BioRes. 3(1), 79-90. |
|
3(1)
2008 |
91-97 |
Csóka, L., Lorincz, A., and Winkler, A. (2008). "Sonochemically modified wheat straw for pulp and papermaking to increase its economical performance and reduce environmental issues," BioRes. 3(1), 91-97. |
|
3(1)
2008 |
98-107 |
Galgut, P. N. (2008). "Radiographic observations on the use of two different regeneration materials in a single subject: Case study," BioRes. 3(1), 98-107. |
|
3(1)
2008 |
108-122 |
Talebnia, F., Pourbafrani, M., Lundin, M., and Taherzadeh, M. J. (2008). "Optimization study of citrus wastes saccharification by dilute-acid hydrolysis," BioRes. 3(1), 108-122. |
|
3(1)
2008 |
123-141 |
Montoneri, E., Boffa, V., Quagliotto, P., Mendichi, R., Chierotti, M. R., Gobetto, R., and Medana, C. (2008). "Humic acid-like matter isolated from green urban wastes. Part 1. Structure and surfactant properties," BioRes. 3(1), 123-141. |
|
3(1)
2008 |
142-154 |
Esteves, B. M., Domingos, I. J., and Pereira, H. M. (2008). "Pine wood modification by heat treatment in air," BioRes. 3(1), 142-154. |
|
3(1)
2008 |
155-169 |
Foulk, J. A., Akin, D. E., and Dodd, R. B. (2008). "Influence of pectinolytic enzymes on retting effectiveness and resultant fiber properties," BioRes. 3(1), 155-169. |
|
3(1)
2008 |
170-177 |
Ioelovich, M., and Leykin, A. (2008). "Structural investigations of various cotton fibers and cotton celluloses," BioRes. 3(1), 170-177. |
|
3(1)
2008 |
178-191 |
Mikkonen, K. S., Yadav, M. P., Cooke, P., Willför, S., Hicks, K. B., and Tenkanen, M. (2008). "Films from spruce galactogluccomannan blended with poly(vinyl alcohol), corn arabonoxylan, and konjac glucomannan," BioRes. 3(1), 178-191. |
|
3(1)
2008 |
192-203 |
Subramanian, R., Kononov, A., Kang, T., Paltakari, J., and Paulapuro, H. (2008). "Structure and properties of some natural cellulosic fibrils," BioRes. 3(1), 192-203. |
|
3(1)
2008 |
204-216 |
McSweeny, J. D., Rowell, R. M., Chen, G. C., Eberhardt, T. L., and Min, S.-H. (2008). "Periodate and hypobromite modification of Southern Pine wood to improve sorption of copper ion," BioRes. 3(1), 204-216. |
|
3(1)
2008 |
217-233 |
Montoneri, E., Savarino, P., Bottigliengo, S., Musso, G., Boffa, V., Prevot, A. B., Fabri, D., and Pramauro, E. (2008). "Humic acid-like matter isolated from green urban wastes. Part II: Performance in chemical and environmental technologies," BioRes. 3(1), 217-233. |
|
3(1)
2008 |
234-246 |
Soni, R., Nazir, A., Chadha, B. S., and Saini, H. S. (2008). "Novel sources of fungal cellulases for efficient deinking of composite paper waste," BioRes. 3(1), 234-246. |
|
3(1)
2008 |
246-254 |
Chen, Y., Liu, Y.-F., and Tan, H.-M. (2008). "Preparation of macroporous cellulose-based superabsorbent polymer through the precipitation method," BioRes. 3(1), 247-254. |
|
3(2)
2008 |
297-315 |
Sun, Y., Lin, L., Deng, H., Li, J., He, B., Sun, R., and Ouyang, P. (2008). "Structural changes of bamboo cellulose in formic acid," BioRes. 3(2), 297-315. |
|
3(2)
2008 |
316-334 |
Quintero, O. L., Amicarelli, A. A., di Sciascio, F., and Scaglia, G. (2008). "State estimation in alcoholic continuous fermentation of Zymomonas mobilus using recursive Bayesian filtering: A simulation approach," BioRes. 3(2), 316-334. |
|
3(2)
2008 |
335-345 |
Giese, E. C., Dekker, R. F. H., and Barbosa, A. M. (2008). "Orange bagasse as substrate for the production of pectinase and laccase by Botryosphaeria rhodina MAMB-05 in submerged and solid state fermentation," BioRes. 3(2), 335-345. |
|
3(2)
2008 |
346-362 |
Deka, M., and Petrič, M. (2008). "Photo-degradation of water borne acrylic coated modified and non-modified wood during artificial light exposure," BioRes. 3(2), 346-362. |
|
3(2)
2008 |
363-382 |
Xu, C., Su, H., and Cang, D. (2008). "Liquefaction of corn distillers dried grains with solubles (DDGS) in hot-compressed phenol," BioRes. 3(2), 363-382. |
|
3(2)
2008 |
383-402 |
Ekhtera, M. H., Rezayati Charani, P., Ramezani, O., and Azadfallah, M. (2008). "Effects of poly-aluminum chloride, starch, alum, and rosin on the rosin sizing, strength, and microscopic appearance of paper prepared from old corrugated container (OCC) pulp," BioRes. 3(2), 383-402. |
|
3(2)
2008 |
403-424 |
El-Sharkawy, K., Haavisto, S., Koskenkely, K., and Paulapuro, H. (2008). "Effect of fiber flocculation and filling design on refiner loadability and refining characteristics," BioRes. 3(2), 403-424. |
|
3(2)
2008 |
425-436 |
Porankiewicz, B., and Wieloch, G. (2008). "Drill wear during the boring of particle board: A multi-factor analysis including effects of mineral contaminants," BioRes. 3(2), 425-436. |
|
3(2)
2008 |
437-451 |
Brännström, M., Manninen, J., and Oja, J. (2008). "Predicting the strength of sawn wood by tracheid laser scattering," BioRes. 3(2), 437-451. |
|
3(2)
2008 |
452-460 |
Dawson, L., and Boopathy, R. (2008). "Cellulosic ethanol production from sugarcane bagassed without enzymatic saccharification," BioRes. 3(2), 452-460. |
|
3(2)
2008 |
461-476 |
Ni, W., Chen, J., and Xu, Q. (2008). "Synthesis and characterization of hierarchically porous silica with poplar tissue as template with assistance of supercritical CO2," BioRes. 3(2), 461-476. |
|
3(2)
2008 |
477-490 |
Ander, P., Hildén, L., and Daniel, G. (2008). "Cleavage of softwood kraft pulp fibers by HCl and cellulases," BioRes. 3(2), 477-490. |
|
3(2)
2008 |
491-502 |
Peters, J., Fischer, K., and Fischer, S. (2008). "Characterization of emissions from thermally modified wood and their reduction by chemical treatment," BioRes. 3(2), 491-502. |
|
3(2)
2008 |
503-516 |
Singh, S. P. (2008). "A comparison of different methods of paper surface smoothness evaluation," BioRes. 3(2), 503-516. |
|
3(2)
2008 |
517-537 |
Kocaefe, D., Poncsak, S., and Boluk, Y. (2008). "Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen," BioRes. 3(2), 517-537. |
|
3(2)
2008 |
538-548 |
Nada, A. M. A., Kassem, N. F., and Mohamed, S. H. (2008). "Characterization and properties of ion exchangers produced from lignin precipitated after peroxyacid pulping," BioRes. 3(2), 538-548. |
|
3(2)
2008 |
549-565 |
Mattinen, M.-L., Suortti, T., Gosselink, R., Argyropoulos, D. S., Evtuguin, D., Suurnäkki, A., de Jong, E., and Tamminen, T. (2008). "Polymerization of different lignins by laccase," BioRes. 3(2), 549-565. |
|
3(2)
2008 |
566-575 |
Khambalkar, V. P., Karale, D. S., Gadge, S. R., and Dahatonde, S. B. (2008). "Assessment of bioenergy potential of a rural village for self energy generation," BioRes. 3(2), 566-575. |
|
3(3)
2008 |
670-683 |
Martín, C., Marcet, M., and Thomsen, A. B. (2008). "Comparison between wet oxidation and steam explosion as pretreatment methods for enyzmatic hydrolysis of sugarcane bagasse," BioRes. 3(3), 670-683. |
|
3(3)
2008 |
684-700 |
Porankiewicz, B., and Wieloch, G. (2008). "Sanding of Fagus silvatica L. wood perpendicularly to the grains," BioRes. 3(3), 684-700. |
|
3(3)
2008 |
701-712 |
Lima, C. F., Barbosa, L. C. A., Marcelo, C. R., Silvério, F. O., and Colodette, J. L. (2008). "Comparison between analytical pyrolysis and nitrobenzene oxidation for determination of syringyl/guaiacyl ratio in Eucalyptus spp. lignin," BioRes. 3(3), 701-712. |
|
3(3)
2008 |
713-730 |
Xu, C., Willför, S., and Holmbom, B. (2008). "Rheological properties of mixtures of spruce galactoglucomannans and konjac glucomannan or some other polysaccharides,"BioRes. 3(3), 713-730. |
|
3(3)
2008 |
731-744 |
Patyakin, V. I., Sugaipov, U. U., Birman, A. R., Bazarov, S. M., Pilshikov, Y. N., Spitsyn, A. A., and Mettee, H. D. (2008). "Mechanical and chemical modification of wood materials - Compressed wood and oxidized charcoal," BioRes. 3(3), 731-744. |
|
3(3)
2008 |
745-757 |
Porankiewicz, B., Dolata, A., and Wieloch, G. (2008). "Cutting force during the turning of wood from black locust," BioRes. 3(3), 745-757. |
|
3(3)
2008 |
758-773 |
Imam, S. H., Chiou, B.-S., Woods, D., Shey, J., Glenn, G. M., Orts, W. J., Narayan, R., Avena-Bustillos, R. J., McHugh, T. H., Pantoja, A., and Bechtel, P. J. (2008). "Starch/pulp-fiber based packaging foams and cast films containing Alaskan fish by-products (waste)," BioRes. 3(3), 758-773. |
|
3(3)
2008 |
774-788 |
Ni, W., Xu, Q., Jiao, J.-X., Liu, X., and Ren, C. (2008). "Hierarchically porous Fe2O3 and Fe2O3/SiO2 composites prepared by cypress tissue template with assistance of supercritical CO2," BioRes. 3(3), 774-788. |
|
3(3)
2008 |
789-800 |
Bodîrlău, R., Teacă, C. A., and Spiridon, I. (2008). "Chemical modification of beech wood: Effect on thermal stability," BioRes. 3(3), 789-800. |
|
3(3)
2008 |
801-815 |
Lei, X., Lin, L., and Li, K. (2008). "Effect of xylanase pretreatment of wood chips on fiber separation in the CTMP refining process," BioRes. 3(3), 801-815. |
|
3(3)
2008 |
816-828 |
Jahan, M. S., Ahsan, L., Noori, A., and Quaiyyum, M. A. (2008). "Process for the production of dissolving pulp from Trema orientalis (nalita) by prehydrolysis kraft and soda-ethylenediamine (EDA) process,"BioRes. 3(3), 816-828. |
|
3(3)
2008 |
829-837 |
Keheyan, Y. (2008). "PY/GC/MS analysis of historical papers," BioRes. 3(3), 829-837. |
|
3(3)
2008 |
838-858 |
Porankiewicz, B., Iskra, P., Jóźwiak, K, Tanaka, C., and Zborowski, W. (2008). "High speed steel tool wear after wood milling in the presence of high temperature tribochemical reactions,"BioRes. 3(3), 838-858. |
|
3(3)
2008 |
859-869 |
Georgieva, D., Nenkova, S., Herzog, M., and Behrendt, G. (2008). "High mechanical strength wood polymer composites by use of a new polyurethane binder system," BioRes. 3(3), 859-869. |
|
3(3)
2008 |
870-880 |
Han, Y., Law, K.-N., and Lanouette, R. (2008). "Modification of jack pine TMP long fibers by alkaline peroxide - Part 1. Chemical characteristics of fibers and spent liquor," BioRes. 3(3), 870-880. |
|
3(3)
2008 |
881-897 |
Rabelo, M. S., Colodette, J. L., Sacon, V. M., Silva, M. R., and Azevedo, M. A. B. (2008). "Molybdenum catalyzed acid peroxide bleaching of eucalyptus kraft pulp," BioRes. 3(3), 881-897. |
|
3(3)
2008 |
898-909 |
Fernandes, S., Murray, P. G., and Tuohy, M. G. (2008). "Enzyme systems from the thermophilic fungusTalaromyces emersonii for sugar beet bioconversion," BioRes. 3(3), 898-909. |
|
3(4)
2008 |
983-994 |
Somboon, P., Nieminen, K., and Paulapuro, H. (2008). "Finite element analysis of the fatigue behavior of wood cell walls," BioRes. 3(4), 983-994. |
|
3(4)
2008 |
995-1009 |
Zanini, S., Canevali, C., Orlandi, M., Tolppa, E.-L., Zoia, L., Riccardi, C., and Morazzoni, F. (2008). "Radical formation on CTMP fibers by argon plasma treatments and related lignin chemical changes," BioRes. 3(4), 995-1009. |
|
3(4)
2008 |
1010-1019 |
Kalia, S., Sharma, S., Bhardwaj, B., Kaith, B. S.., and Singha, A. S. (2008). "Potential use of graft copolymers of mercerized flax as filler in polystyrene composite materials,"BioRes. 3(4), 1010-1019. |
|
3(4)
2008 |
1020-1029 |
Millati, R., Karimi, K., Edebo, L., Niklasson, C., and Taherzadeh, M. J. (2008). "Ethanol production from xylose and wood hydrolyzate by Mucor indicus at different aeration rates," BioRes. 3(4), 1020-1029. |
|
3(4)
2008 |
1030-1041 |
Yokota, S., Matsuo, K., Kitaoka, T., and Wariisi, H. (2008). "Specific interaction acting at a cellulose-binding domain/cellulose interface for papermaking application," BioRes. 3(4), 1030-1041. |
|
3(4)
2008 |
1042-1050 |
Barbosa, E. S., Perrone, D., Amaral Vendramini, A. L., and Ferriera Leite, S. G. (2008). "Vanillin production by Phanerochaete chrysosporium grown on green coconut agro-industrial husk in solid state fermentation," BioRes. 3(4), 1042-1050. |
|
3(4)
2008 |
1051-1062 |
Das, M., and Chakrabarty, D. (2008). "Thermogravimetric analysis and weathering study by water immersion of alkali-treated bamboo strips," BioRes. 3(4), 1051-1062. |
|
3(4)
2008 |
1063-1080 |
Rutledge, A. R., Venditti, R. A., Pawlak, J. J., Patel, S., and Cibils, J. L. (2008). "Carbonized starch microcellular foam-cellulose fiber composite structures," BioRes. 3(4), 1063-1080. |
|
3(4)
2008 |
1081-1091 |
Kovur, S. K., Schenzel, K. C., Grimm, E., and Diepenbrock, W. (2008). "Characterization of refined hemp fibers using NIR FT Raman micro spectroscopy and environmental scanning electron microscopy,"BioRes. 3(4), 1081-1091. |
|
3(4)
2008 |
1092-1102 |
Quintana, G. C., Rocha, G. J. M., Gonçalves, A. R., and Velásquez, J. A. (2008). "Evaluation of heavy metal removal by oxidised lignins in acid media from various sources," BioRes. 3(4), 1092-1102. |
|
3(4)
2008 |
1103-1117 |
Porankiewicz, B. (2008). "Theoretical method for prediction of the cutting edge recession during milling wood and secondary wood products,"BioRes. 3(4), 1103-1117. |
|
3(4)
2008 |
1118-1129 |
Montplaisir, D., Daneault, C., and Chabot, B. (2008)."Surface composition of grafted thermomechanical pulp through XPS measurement," BioRes. 3(4), 1118-1129. |
|
3(4)
2008 |
11130-1145 |
Teacă, C. A., and Bodîrlău, R. (2008). "Assessment of toxicity of industrial wastes using crop plant assays," BioRes. 3(4), 1103-1145. |
|
3(4)
2008 |
1146-1155 |
Carletto, R. A., Chimirri, F., Bosco, F., and Ferrero, F. (2008). "Adsorption of Congo Red dye on hazelnut sheets and degradation with Phanerochaete chrysosporium," BioRes. 3(4), 1146-1155. |
|
3(4)
2008 |
1156-1172 |
Mellouk, H., Khezami, L., Rezzoug, S.-A., and Capart, R. (2008). "Total valorisation of red cedar (Thuja Plicata) sawmills wastes. Isolation of extractives and production of activated carbon from solid residue," BioRes. 3(4), 1156-1172. |
|
3(4)
2008 |
1173-111186 |
Singha, A. S., and Thakur, V. K. (2008). "Fabrication and study of lignocellulosic Hibiscus sabdariffa fiber reinforced polymer composites," BioRes. 3(4), 1173-1186. |
|
3(4)
2008 |
1187-1195 |
Sasso, C., Fenoll, M., Stephan, O., and Beveventi, D. (2008). "Use of wood derivatives as doping / dispersing agents in the preparation of polypyrrole aqueous dispersions,"BioRes. 3(4), 1187-1195. |
|
3(4)
2008 |
1196-1217 |
El-Saied, H., El-Diwany, A. I., Basta, A H., Atwa, N. A., and El-Ghwas, D. E. (2008). "Production and characterization of economical bacterial cellulose," BioRes. 3(4), 1196-1217. |
|
3(4)
2008 |
1218-1227 |
Huber, P., Carré, B., and Petit-Conil, M. (2008). "The influence of TMP fibre flexibility on flocculation and formation," BioRes. 3(4), 1218-1227. |
|
3(4)
2008 |
1228-1243 |
Chand, N., and Jhod, B. D. (2008). "Mechanical, electrical, and thermal properties of maleic anhydride modified rice husk filled PVC composites," BioRes. 3(4), 1228-1243. |
|
3(4)
2008 |
1244-1255 |
Winandy, J., and Cai, Z. (2008). "Potential of using anaerobically digested bovine biofiber as a fiber source for wood composites," BioRes. 3(4), 1244-1255. |
|
3(4)
2008 |
1256-1266 |
Spelter, H., Winandy, J., and Zauche, T. (2008). "Anaerobically digested bovine biofiber as a source of fiber for particleboard manufacturing: An economic analysis," BioRes. 3(4), 1256-1266. |
|
3(4)
2008 |
1267-1277 |
Ndazi, B. S., Nyahumwa, C., and Tesha, J. (2008). "Chemical and thermal stability of rice husks against alkali treatment," BioRes. 3(4), 1267-1277. |
|
3(4)
2008 |
1278-1266 |
Solár, R., Mamoň, M., Dibdiaková, J., Reinprecht, L, Pánek, M., and Hudec, J. (2008). "Effect of biotic and abiotic pretreatments of hornbeam wood on its properties interesting from viewpoint of pulping in alkaline media. Part 1: Physical Properties," BioRes. 3(4), 1278-1290. |
|
3(4)
2008 |
1291-1302 |
Solár, R., Kačík, F., Reinprecht, L, Laurová, M., Geffertová, J., and Dibdiaková, J. (2008). "Effect of biotic and abiotic pretreatments of hornbeam wood on its properties interesting from viewpoint of pulping in alkaline media. Part 2: Chemical alterations," BioRes. 3(4), 1291-1302. |
|
3(4)
2008 |
1303-1314 |
Ghosh, S. C., Militz, H., and Mai, C. (2008). "Decay resistance of treated wood with functionalised commercial silicones," BioRes. 3(4), 1303-1314. |
|
3(4)
2008 |
1315-1328 |
Ahola, S., Myllytie, P., Österberg, M., Teerinen, T., and Laine, J. (2008). "Effect of polymer adsorption on cellulose nanofibril water binding capacity and aggregation," BioRes. 3(4), 1315-1328. |
|
3(4)
2008 |
1329-1348 |
Labbé, N., Ye, X. P., Franklin, J. A., Womac, A. R., Tyler, D. D., and Rials, T. G. (2008). "Analysis of switchgrass characteristics using near infrared spectroscopy," BioRes. 3(4), 1329-1348. |
|
3(4)
2008 |
1349-1358 |
Stoutenburg, R. M., Perrotta, J. A., Amidon, T. E., and Nakas, J. P. (2008). "Ethanol production from a membrane purified hemicellulosic hydrolysate drived from sugar maple by Pichia stipitis NRRL Y-7124," BioRes. 3(4), 1349-1358. |
|
3(4)
2008 |
1359-1370 |
Jahan, M. S., Rawsan, S., Chowdhury, D. A. N., and Al-Maruf, A. (2008). "Alternative pulping process for producing dissolving pulp from jute,"BioRes. 3(4), 1359-1370. |
|
3(4)
2008 |
1371-1376 |
Malutan, T., Nicu, R., and Popa, V. I. (2008). "Lignin modification by expoxidation," BioRes. 3(4), 1371-1376. |
|
4(1)
2009 |
3-14 |
Dammström, S., Salmén, L., and Gatenholm, P. (2009). "On the interactions between cellulose and xylan, a biomimetic simulation of the hardwood cell wall," BioRes. 4(1), 3-14. |
|
4(1)
2009 |
15-25 |
Johansson, C., Lundquist, K., and Theliander, H. (2009). "Fractionation of processed spruce wood obtained in the production of ethanol," BioRes. 4(1), 15-25. |
|
4(1)
2009 |
26-37 |
Gustafsson, C., and Richards, T. (2009). "Pyrolysis kinetics of washed precipitated lignin," BioRes. 4(1), 26-37. |
|
4(1)
2009 |
38-48 |
Tang, L.-Q., Ni, W., Zhao, H.-Y., Xu, Q., and Jiao, J.-X. (2009). "Preparation of macroporous TiO2 by starch microspheres template with assistance of supercritical CO2,"BioRes. 4(1), 38-48. |
|
4(1)
2009 |
49-71 |
Müller, G., Schöpper, C., Vos, H., Kharazipou, A., and Polle, A. (2009). "FTIR-ATR spectroscopic analysis of chages in wood properties during particle- and fibreboard production of hard- and softwood trees," BioRes. 4(1), 49-71. |
|
4(1)
2009 |
72-79 |
Košíková, B., Sláviková, E., and Lábaj, J. (2009). "Affinity of lignin preparations towards genotoxic compounds," BioRes. 4(1), 72-79. |
|
4(1)
2009 |
80-93 |
Nada, A. M. A., Abd El-Mongy, S., and Abd El-Sayed, E. S. (2009). "Effect of different treatments on cellulose toward carboxylation and its application for metal ion absorption," BioRes. 4(1), 80-93. |
|
4(1)
2009 |
94-110 |
Saarinenn, T., Orelma, H., Grönqvist, S., Andberg, M., Holappa, S., and Laine, J. (2009). "Adsorption of different laccases on cellulose and lignin surface," BioRes. 4(1), 94-110. |
|
4(1)
2009 |
111-125 |
Bledzki, A. K., Lucka, M., Al Mamun, A., and Michalski, J. (2009). "Biological and electrical resistance of acetylated flax fibre reinforced polypropylene composites," BioRes. 4(1), 111-125. |
|
4(1)
2009 |
126-141 |
Pulkkinen, I., Fiskari, J., and Alopaeus, V. (2009). "The effect of hardwood fiber morphology on the hygroexpansivity of paper," BioRes. 4(1), 126-141. |
|
4(1)
2009 |
142-154 |
Chalamcherla, V., Maringanti A., S., Muvva, V. L., Mangamoori, L. N., and Ramireddy, M. R. (2009). "Use of lignocellulolytic mutants of Pleurotus ostreatus in ruminant feed formulations," BioRes. 4(1), 142-154. |
|
4(1)
2009 |
155-171 |
Nazir, A., Soni, R., Saini, H. S., Manhas, R. K., and Chadha, B. S. (2009). "Regulation of expression of multiple beta-glucosidases of Aspergillus terreus and their purificaiton and characterization," BioRes. 4(1), 155-171. |
|
4(1)
2009 |
172-193 |
Rutkowska, E. W., Wollboldt, P., Zuckerstätter, G., Weber, H. K.., and Sixta, H. (2009). "Characterization of structural changes in lignin during continuous batch kraft cooking of Eucalyptus globulus," BioRes. 4(1), 172-193. |
|
4(1)
2009 |
194-204 |
Tarmian, A., and Azadfallah, M. (2009). "Variation of cell features and chemical composition in spruce consisting of opposite, normal, and compression wood," BioRes. 4(1), 194-204. |
|
4(1)
2009 |
205-213 |
Uraki, Y., Tamai, Y., Ogawa, M., Gaman, S., and Tokura, S. (2009). "Preparation of activated carbon from peat," BioRes. 4(1), 205-213. |
|
4(1)
2009 |
214-233 |
Ekhtera, M. H., Azadfallah, M., Bahrami, M., and Mohammadi-Rovshandeh, J. (2009). "Comparative study of pulp and paper properties of canola stalks prepared by using dimethyl formamide or diethylene glycol," BioRes. 4(1), 214-233. |
|
4(1)
2009 |
234-244 |
Yokota, S., Matsuo, K., Kitaoka, T., and Wariishi, H. (2009). "Retention and paper-strength characteristics of anionic polyacarylamides conjugated with carbohydrate-binding modules," BioRes. 4(1), 234-244. |
|
4(1)
2009 |
245-256 |
Enayati, A. A., Hamzeh, Y., Mirshokraie, S. A., and Molaii, M. (2009). "Papermaking potential of canola stalks," BioRes. 4(1), 245-256. |
|
4(1)
2009 |
257-267 |
Pandey, K. K., Jayashree, and Nagaveni, H. C. (2009). "Study of dimensional stability, decay resistance, and light stability of phenylisothiocyanate modified rubberwood," BioRes. 4(1), 257-267. |
|
4(1)
2009 |
268-284 |
Patel, H., Gupte, A., and Gupte, S. (2009). "Effect of different culture conditions and inducers on production of laccase by a basidiomycete fungal isolate Pleurotus ostreatus HP-1 under solid state fermentation," BioRes. 4(1), 268-284. |
|
4(1)
2009 |
285-291 |
Valchev, I., Nenkova, S., Tsekova, P., and Lasheva, V. (2009). "Use of enzymes in hydrolysis of maize stalks," BioRes. 4(1), 285-291. |
|
4(1)
2009 |
292-308 |
Singha, A. S., and Thakur, V. K. (2008). "Study of mechanical properties of urea-formaldehyde thermosets reinformed by pine needle powder," BioRes. 4(1), 292-308. |
|
4(1)
2009 |
309-320 |
Dehkhoda, A., Brandberg, T., and Taherzadeh, M. J. (2009). "Comparison of vacuum and high pressure evaporated wood hydrolyzate for enthanol production by repeated fed-batch using flocculating Saccharomyces cerevisiae," BioRes. 4(1), 309-320. |
|
4(1)
2009 |
321-340 |
Liimatainen, H., Haavisto, S., Haapala, A., and Niinimäki, J. (2009). "Influence of adsorbed and dissolved carboxymethyl cellulose on fibre suspension dispersing, dewaterability, and fines retention," BioRes. 4(1), 321-340. |
|
4(2)
2009 |
458-470 |
Xiu, S., Zhang, Y., and Shahbazi, A. (2009). "Swine manure solids separation and thermochemical conversion to heavy oil," BioRes. 4(2), 458-470. |
|
4(2)
2009 |
471-481 |
Jahan, M. S., Sabina, R., Tasmin, B., Chowdhury, D. A. N., Noori, A., and Al-Maruf, A. (2009). "Effect of harvesting age on the chemical and morphological properties of dhaincha (Sesbania aculeata) and its pulpability and bleachability," BioRes. 4(2), 471-481. |
|
4(2)
2009 |
482-496 |
Mattinen, M.-L., Stuijs, K., Suortti, T., Mattila, I., Kruus, K., Willför, S., Tamminen, T., and Vincken, J.-P. (2009). "Modification of lignans by Trametes hirsuta laccase," BioRes. 4(2), 482-496. |
|
4(2)
2009 |
497-508 |
Yokota, S, Ohta, T., Kitaoka, T, Ona, T., and Wariishi, H. (2009). "Preparation and characteristics of anionic polyacrylamides containing direct dye with a high affinity for cellulose," BioRes. 4(2), 497-508. |
|
4(2)
2009 |
509-521 |
Vynios, D. H., Papaioannou, D. A., Filos, G., Karigiannis, G., Tziala, T., and Lagios, G. (2009). "Enzymatic production of glucose from waste paper," BioRes. 4(2), 509-521. |
|
4(2)
2009 |
522-528 |
Dwivedi, U. K., Ghosh, A., and Chand, N. (2009). "Role of PVA modification in improving the sliding wear behavior of bamboo," BioRes. 4(2), 522-528. |
|
4(2)
2009 |
529-536 |
Lundquist, K., Langer, V., and Parkås, J. (2009). "The structure and conformation of lignin as judged by X-ray crystallographic investigations of lignin model compounds: Arylglycerol beta-syringyl ethers," BioRes. 4(2), 529-536. |
|
4(2)
2009 |
537-543 |
Chi, C., Zhang, Z., Ge, W., and Jameel, H. (2009). "The relationship between two methods for evaluating five-carbon sugars in eucalyptus extraction liquor," BioRes. 4(2), 537-543. |
|
4(2)
2009 |
544-553 |
Singh, G., Ahuja, N., Sharma, P., and Capalash, N. (2009). "Response surface methodology for the optimized production of an alkalophilic laccase from gamma-proteobacterium JB," BioRes. 4(2), 544-553. |
|
4(2)
2009 |
554-565 |
Treimanis, A., Grinfelds, U., and Skute, M. (2009). "Are the pulp fiber wall surface layers the most resistant ones towards bleaching?" BioRes. 4(2), 554-565. |
|
4(2)
2009 |
566-588 |
Mwaikambo, L. Y. (2009). "Tensile properties of alkalised jute fiberes," BioRes. 4(2), 566-588. |
|
4(2)
2009 |
589-601 |
Li, Z., Pang, Y., Lou, H., and Qiu, X. (2009). "Influence of lignosulfonates on the properties of dimethomorph water-dispersible granules," BioRes. 4(2), 589-601. |
|
4(2)
2009 |
602-625 |
Salmi, J., Nypelö, T., Österberg, M., and Laine, J. (2009). "Layer structures formed by silica nanoparticles and cellulose nanofibrils with cationic polyacrylamide (C-PAM) on cellulose surface and their influence on interactions," BioRes. 4(2), 602-625. |
|
4(2)
2009 |
626-639 |
Jonoobi, M., Harun, J., Shakeri, A., Misra, M., and Oksman, K. (2009). "Chemical composition, crystallinity, and thermal degradation of bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofibers," BioRes. 4(2), 626-639. |
|
4(2)
2009 |
640-658 |
Liimatainen, H., Haapala, A., Tomperi, J., and Niinimäki, J. (2009). "Fibre floc morphology and dewaterability of a pulp suspension: Role of flocculations kinetics and characteristics of flocculation agents," BioRes. 4(2), 640-658. |
|
4(2)
2009 |
659-673 |
Ghosh, S. C., Militz, H., and Mai, C. (2009). "Natural weathering of Scots pine (Pinus sylvestris L.) boards modified with functionalised commercial silicone emulsions," BioRes. 4(2), 659-673. |
|
4(2)
2009 |
674-686 |
Zuang, J., Liu, Y., Wu, Z., Sun, Y., and Lin, L. (2009). "Hydrolysis of wheat straw hemicellulose and detoxification of the hydrolysate for xylitol production," BioRes. 4(2), 674-686. |
|
4(2)
2009 |
687-703 |
Leschinsky, M., Sixta, H., and Patt, R. (2009). "Detailed mass balances of the autohydrolysis of Eucalyptus globulus at 170 oC," BioRes. 4(2), 687-703. |
|
4(2)
2009 |
704-713 |
Jin, F., and Enomoto, H. (2009). "Hydrothermal conversion of biomass into value-added products: Technology that mimics nature," BioRes. 4(2), 704-713. |
|
4(2)
2009 |
714-729 |
Ford, E., Popil, R. E., and Kumar, S. (2009). "Breathable water-resistant linerboard coatings by electrospraying application," BioRes. 4(2), 714-729. |
|
4(2)
2009 |
730-739 |
Ray, D., Das, M., and Mitra, D. (2009). "Influence of alkali treatment on creep properties and crystallinity of jute fibres," BioRes. 4(2), 730-739. |
|
4(2)
2009 |
740-755 |
Tazrouti, N., and Amrani, M. (2009). "Chromium (VI) adsorption onto activated kraft lignin produced from alfa grass (Stipa tenacessima)," BioRes. 4(2), 740-755. |
|
4(2)
2009 |
756-770 |
Uysal, B., Kurt, Ş, and Özcan, C. (2009). "Thermal conductivity of laminated veneer lumbers bonded with various adhesives and impregnated with various chemicals," BioRes. 4(2), 756-770. |
|
4(2)
2009 |
771-788 |
Pedieu, R., Riedl, B., and Pichette, A. (2009). "Properties of birch outer bark panels reinforced with wood strands in the surface layers," BioRes. 4(2), 771-788. |
|
4(2)
2009 |
789-804 |
Sukhbaatar, B., Steele, P. H., and Kim, M. G. (2009). "Use of lignin separated from bio-oil in oriented strand board binder phenol-formaldehyde resins,"BioRes. 4(2), 789-804. |
|
4(2)
2009 |
805-815 |
Košíková, B., and Lábaj, J. (2009). "Lignin-stimulated protection of polypropylene films and DNA in cells of mice against oxidation damage," BioRes. 4(2), 805-815. |
|
4(3)
2009 |
909-920 |
Arora, D. S., and Sharma, R. K. (2009). "Enhancement in in vitro digestibility of wheat straw obtained from different geographic regions during solid state fermentation by white rot fungi," BioRes. 4(3), 909-920. |
|
4(3)
2009 |
921-931 |
Jahan, M. S., and Rawshan, S. (2009). "Reinforcing potential of jute pulp with Trema orientalis (nalita) pulp," BioRes. 4(2), 921-931. |
|
4(3)
2009 |
932-945 |
Gupta, V. K., Gaur, R., Yadava, S. K., and Darmal, N. S. (2009). "Optimization of xylanase production from free and immobilized cells of Fusarium solani F7," BioRes. 4(3), 932-945. |
|
4(3)
2009 |
946-959 |
Wang, X.-H., Chen, H.-P., Ding, X.-J., Yang, H.-P., Zhang, S.-H., and Shen, Y.-Q. (2009). "Properties of gas and char from microwave pyrolysis of pine sawdust," BioRes. 4(3), 946-959. |
|
4(3)
2009 |
960-969 |
Kurt, Ş., and Özçifçi, A. (2009). "Effect of various fire retardants on Brinell hardness of some wood," BioRes. 4(3), 960-969. |
|
4(3)
2009 |
970-978 |
Abdolzadeh, H., and Doosthoseini, K. (2009). "Evaluation of old corrugated container and wood fiber application on surface roughness of three-layer particleboard," BioRes. 4(3), 970-978. |
|
4(3)
2009 |
979-985 |
Zhou, J., Sui, X., and Shi, H. (2009). "Study on the structural change of lignin during auto-catalyzed ethanol-water pulping of aspen by 1H-NMR," BioRes. 4(3), 979-985. |
|
4(3)
2009 |
986-1005 |
Sharma, R. K., and Chauhan, G. S. (2009). "Synthesis and characterization of graft copolymers of 2-hdroxyethyl methacrylate and some comonomers onto extracted cellulose for use in separation technologies," BioRes 4(3), 986-1005. |
|
4(3)
2009 |
1006-1016 |
Guo, S., Zhan, H., Zhang, C., Fu, S., Heijnesson-Hultén, A., Basta, J., and Greshick, T. (2009). "Pulp and fiber characteristics of wheat straw and eucalyptus pulps - A comparison," BioRes. 4(3), 1006-1016. |
|
4(3)
2009 |
1017-1031 |
Nada, A. M. A., Mahdy, A. A., and El-Gendy, A. A. (2009). "Spectroscopy and chemical studies of cation exchangers prepared from corn cobs,"BioRes. 4(3), 1017-1031. |
|
4(3)
2009 |
1032-1043 |
Ates, S., Akyildiz, M. H., and Ozdemir, H. (2009). "Effects of heat treatment on calabrian pine (Pinus brutia ten.) wood," BioRes. 4(3), 1032-1043. |
|
4(3)
2009 |
1044-1057 |
Chirkova, J., Andersons, B., and Andersone, I. (2009). "Study of the structure of wood-related biopolymers by sorption methods," BioRes. 4(3), 1044-1057. |
|
4(3)
2009 |
1058-1069 |
Campos, A. C. M., Hein, P. R. G., Mendes, R. F., Mendes, L. M., and Chaix, G. (2009). "Near infrared spectroscopy to evaluate composition of agro-based particleboards," BioRes. 4(3), 1058-1069. |
|
4(3)
2009 |
1070-1087 |
Kumarappan, S., Joshi, S., and MacLean, H. L. (2009). "Biomass supply for biofuel production: Estimates for the United States and Canada," BioRes. 4(3), 1070-1087. |
|
4(3)
2009 |
1088-1097 |
Kong, F., and Ni, Y. (2009). "Development of cellulosic paper-based test strips for Cr(VI) determination," BioRes. 4(3), 1088-1097. |
|
4(3)
2009 |
1098-1108 |
Yokota, S., Ohta, T., Kitaoka, T., and Wariishi, H. (2009). "Adsorption of cellobiose-pendant polymers to a cellulose matrix determined by quartz crystal microbalance analysis," BioRes. 4(3), 1098-1108. |
|
4(3)
2009 |
1109-1129 |
Sanghi, A., Garg, N., Kuhar, K., Kuhad, R. C., and Gupta, V. K. (2009). "Enhanced production of cellulase-free xylanase by alkalophilic Bacillus subtilis ASH and its application in biobleaching of kraft pulp," BioRes. 4(3), 1109-1129. |
|
4(3)
2009 |
1130-1138 |
Bhoria, P., Singh, G., and Hoodal, G. S. (2009). "Optimization of mannase production from Streptomyces sp. PG-08-03 in submerged fermentation," BioRes. 4(3), 1130-1138. |
|
4(3)
2009 |
1139-1146 |
Masingale, M. P., Alves, E. F., Korbieh, T. N., Bose, S. K., and Francis, R. C. (2009). "An oxidant to replace nitrobenzene in lignin analysis," BioRes. 4(3), 1139-1146. |
|
4(3)
2009 |
1147-1157 |
Zhuang, J., Lin, L., Liu, J., Luo, X., Pang, C., and Ouyang, P. (2009). "Preparation of xylose and kraft pulp from poplar based on formic/acetic acid/ water system hydrolysis," BioRes. 4(3), 1147-1157. |
|
4(3)
2009 |
1158-1167 |
Hu, J.-J., Lei, T.-Z., Xu, G.-Y., Shen, S.-Q., and Liu, J.-W. (2009). "Experimental study of stress relaxation in the process of cold molding with straw," BioRes. 4(3), 1158-1167. |
|
4(3)
2009 |
1168-1177 |
Ioelovich, M. (2009). "Accessibility and crystallinity of cellulose," BioRes. 4(3), 1168-1177. |
|
4(3)
2009 |
1178-1189 |
Shen, J., Song, Z., Qian, X., and Liu, W. (2009). "A preliminary investigation into the use of acid-tolerant precipitated calcium carbonate fillers in papermaking of deinked pulp derived from recycled newspaper," BioRes. 4(3), 1178-1189. |
|
4(4)
2009 |
1267-1275 |
Hamzeh, Y., Abyaz, A., Mirfatahi Niaraki, M. O., and Abdulkhani, A. (2009). "Application of surfactants as pulping additives in soda pulping of bagasse," BioRes. 4(4), 1267-1275. |
|
4(4)
2009 |
1276-1284 |
Telysheva, G., Dizhbite, T., Jashina, L., Andersone, A., Volperts, A., Ponomarenko, J., and Mironova-Ulmane, N. (2009). "Synthesis of lignin-based inorganic/organic hybrid materials favorable for detoxification of ecosystem components," BioRes. 4(4), 1276-1284. |
|
4(4)
2009 |
1285-1304 |
Bodîrlău, R., Teacă, C. A., and Spiridon, I. (2009). "Preparation and characterization of composites comprising modified hardwood and wood polymers/poly(vinyl chloride)," BioRes. 4(4), 1285-1304. |
|
4(4)
2009 |
1305-1318 |
Haron, M. J., Tiansih, M., Ibrahim, N. A., Kassim, A., and Wan Yunus, W. M. Z. (2009). "Sorption of Cu(II) by poly(hydroxamic acid) chelating exchanger prepared from poly(methyl acrylate) grafted oil palm empty fruit bunch (OPEFB)," BioRes. 4(4), 1305-1318. |
|
4(4)
2009 |
1319-1329 |
Sukhbaatar, B., Steele, P. H., Ingram, L. L., and Kim, M. (2009). "An exploratory study on the removal of acetic and formic acids from bio-oil," BioRes. 4(4), 1319-1329. |
|
4(4)
2009 |
1330-1340 |
Nechita, P., Bobu, E., Ciolacu, F., and Kontek, A. (2009). "Study on fibrous composites behaviour in hydrodynamic process of wine filtration," BioRes. 4(4), 1330-1340. |
|
4(4)
2009 |
1341-1358 |
Pirraglia, A., Saloni, D., and van Dyk, H. (2009). "Status of lean manufacturing implementation on secondary wood industries including residential, cabinet, millwork, and panel markets," BioRes. 4(4), 1341-1358. |
|
4(4)
2009 |
1359-1371 |
Nada, A. M. A., El-Kady, M. Y., El-Sayed, E. S. A., and Amine, F. M. (2009). "Preparation and characterization of microcrystalline cellulose (MCC)," BioRes. 4(4), 1359-1371. |
|
4(4)
2009 |
1372-1395 |
Quintero, O. L., Amicarelli, A. A., Scaglia, G., and di Sciascio, F. (2009). "Control based on numerical methods and recursive Bayesian estimation in a continuous alcoholic fermentation process," BioRes. 4(4), 1372-1395. |
|
4(4)
2009 |
1396-1408 |
Garay, R. M., MacDonald, F., Avecedo, M. L., Calderón, B., and Araya, J. E. (2009). "Particleboard made with crop residues mixed with wood from Pinus radiata," BioRes. 4(4), 1396-1408. |
|
4(4)
2009 |
1409-1416 |
Zeinaly, F., Shakhes, J., Firozabadi, M. D., and Shakeri, A. (2009). "Hydrogen peroxide bleaching of CMP pulp using magnesium hydroxide," BioRes. 4(4), 1409-1416. |
|
4(4)
2009 |
1417-1429 |
Erakhrumen, A. A., and Ogunsanwo, O. Y. (2009). "Water absorption, anti-swell efficiency, and dimensional stability properties of neem seed-oil treated wild grown Bambusa vulgaris Schard. ex J. C. Wendl. in southwest Nigeria,"BioRes. 4(4), 1417-1429. |
|
4(4)
2009 |
1430-1454 |
Brännström, M. (2009). "The impact of a strength grading process on sawmill profitability and product quality," BioRes. 4(4), 1430-1454. |
|
4(4)
2009 |
1455-1476 |
Saw, S. K., and Datta, C. (2009). "Thermomechanical properties of jute/bagasse hybrid reinforced epoxy thermoset composites," BioRes. 4(4), 1455-1476. |
|
4(4)
2009 |
1477-1486 |
Wang, J., Chen, Y., Wang, X., and Cao, F. (2009). "Aluminum dodecatungstophosphate (Al0.9H0.3PW12O40) nanotube as a solid acid catalyst one-pot production of biodiesel from waste cooking oil," BioRes. 4(4), 1477-1486. |
|
4(4)
2009 |
1487-1497 |
Wu, Y., Zhou, D.-G., Wang, S.-Q., and Zhang, Y. (2009). "Polypropylene composites reinforced with rice straw micro/nano fibrils isolated by high intensity ultrasonication," BioRes. 4(4), 1487-1497. |
|
4(4)
2009 |
1498-1519 |
Shen, J., Song, Z., Qian, X., and Liu, W. (2009). "Modification of precipitated calcium carbonate filler using sodium silicate/zinc chloride based modifiers to improve acid-resistance and use of the modified filler in papermaking," BioRes. 4(4), 1498-1519. |
|
4(4)
2009 |
1520-1535 |
Li, J., Xiao, B., Yan, R., and Liu, J. (2009). "Development of a nano-Ni-La-Fe/Al2O3 catalyst to be used for syn-gas production and tar removal after biomass gasification," BioRes. 4(4), 1520-1535. |
|
4(4)
2009 |
1536-1544 |
Ayrilmis, N., Dundar, T., Candan, Z., and Akbulut, T. (2009). "Wettability of fire retardant treated laminated veneer lumber (LVL) manufactured from veneers dried at different temperatures," BioRes. 4(4), 1536-1544. |
|
4(4)
2009 |
1545-1554 |
Sahin Kol, H., Özbay, G., and Altun, S. (2009). "Shear strength of heat-treated tali (Erythrophleum ivornese) and iroko (Chlorophora excelsa) woods, bonded with various adhesives," BioRes. 4(4), 1545-1554. |
|
4(4)
2009 |
1555-1571 |
Olsson, M. R. and Berntsson, T. (2009). "Simulations comparing conventional evaporation plants with plants using excess heat," BioRes. 4(4), 1555-1571. |
|
4(4)
2009 |
1572-1585 |
Korpinen, R. I., and Fardim, P. E. (2009). "Reinforcement potential of bleached sawdust kraft pulp in different mechanical pulp furnishes," BioRes. 4(4), 1572-1585. |
|
4(4)
2009 |
1586-1599 |
Ouyang, J., Li, Z., Li, X., Ying, H., and Yong, Q. (2009). "Enhanced enzymatic conversion and glucose production via two-step enzymatic hydrolysis of corncob residue from xylo-oligosaccharides producer's waste," BioRes. 4(4), 1586-1599. |
|
4(4)
2009 |
1600-1619 |
Lähdetie, A., Liitiä, T., Tamminen, T., and Jääskeläinen, A. S. (2009). "Reflectance UV-vis and UV resonance Raman spectroscopy in characterization of kraft pulps," BioRes. 4(4), 1600-1619. |
|
4(4)
2009 |
1620-1634 |
Hein, P. R. G., Sá, V. A. de, Bulfalino, L., and Mendes, L. M. (2009). "Calibrations based on near infrared spectroscopic data to estimate wood-cement panel properties," BioRes. 4(4), 1620-1634. |
|
4(4)
2009 |
1635-1646 |
Kumar, P., Gautam, S. K., Kumar, V., and Singh, S. P. (2009). "Enhancement of optical properties of bagasse pulp by in-situ filler precipitation," BioRes. 4(4), 1635-1646. |
|
4(4)
2009 |
1647-1662 |
Myllytie, P., Salmi, J., and Laine, J. (2009). "The influence of pH on the adsorption and interaction of chitosan with cellulose," BioRes. 4(4), 1647-1662. |
|
4(4)
2009 |
1663-1669 |
Şahin Kol, H. (2009). "Thermal and dielectric properties of pine wood in the transverse direction," BioRes. 4(4), 1663-1669. |
|
4(4)
2009 |
1670-1681 |
Adsul, M. G., Terwadkar, A. P., Varma, A. J., and Gokhale, D. V. (2009). "Cellulases from Penicillium janthinellum mutants: Solid-state production and their stability in ionic liquids," BioRes. 4(4), 1670-1681. |
|
4(4)
2009 |
1682-1693 |
Kurt, Ş., Uysal, B., Özcan, C., and Yildirim, M. N. (2009). "The effects of edge banding thickness of uludag fir bonded with some adhesives on withdrawal strengths of beech dowel pins in composite materials," BioRes. 4(4), 1682-1693. |
|
5(1)
2010 |
8-22 |
Saritha, V., Maruthi, A., and Mukkanti, K. (2010). "Potential fungi for bioremediation of industrial effluents,"BioRes. 5(1), 8-22. |
|
5(1)
2010 |
23-42 |
Zhang, X.., Tu, M., Paice, M., Sacciadis, G., Jiang, Z., Jemaa, N., and Thibault, A. (2010). "Bioconversion of knot rejects from a sulphite pulp mill to ethanol," BioRes. 5(1), 23-42. |
|
5(1)
2010 |
43-54 |
Abdel-Kader, A. H., and Darweesh, H. H. (2010). "Setting and hardening of agro/cement composites," BioRes. 5(1), 43-54. |
|
5(1)
2010 |
55-69 |
Afzal, M. T., Bedane, A. H., Sokhansanj, S., and Mahmood, W. (2010). "Storage of comminuted and uncomminuted forest biomass and its effect on fuel quality," BioRes. 5(1), 55-69. |
|
5(1)
2010 |
70-80 |
Sahin Kol, H., Ozbay, G., Köse, L., and Kurt, S. (2010). "Effects of some impregnation chemicals on combusion characteristics of laminated veneer lumber (LVL) produced with oak and poplar veneers," BioRes. 5(1), 70-80. |
|
5(1)
2010 |
81-98 |
Soni, S. K., and Soni, R. (2010). "Regulation of cellulase synthesis in Chaetomium erraticum,"BioRes. 5(1), 81-98. |
|
5(1)
2010 |
99-107 |
Xie, J., Luo, S., Feng, L., Xu, N., Wang, Y., Xu, W., and Fu, S. (2010). "Production of Trametes gallica lignocellulases for wheat straw degradation," BioRes. 5(1), 99-107. |
PDF |
5(1)
2010 |
108-120 |
Phanphanich, M., and Mani, S. (2010). "Drying characteristics of pine forest residues," BioRes. 5(1), 108-120. |
|
5(1)
2010 |
121-134 |
Patel, S. V., Venditti, R. A., and Pawlak, J. J. (2010). "Dimensional changes of starch microcellular foam during the exchange of water with ethanol and subsequent drying," BioRes. 5(1), 121-134. |
|
5(1)
2010 |
135-146 |
Zhang, M., Chen, H.-P, Gao, Y., He, R.-X., Yang, H.-P., Wang, X.-H., and Zhang, S. H. (2010). "Experimental study on bio-oil pyrolysis/gasification," BioRes.5(1), 135-146. |
|
5(1)
2010 |
147-158 |
Lu, X., Zhang, Y., Yu, Y., and Ji, J. (2010). "Deacidification and esterification of waste cooking oil: Comparison of the coupled process with stand-alone catalytic esterification and extraction processes," BioRes. 5(1), 147-158. |
|
5(1)
2010 |
159-171 |
Yadav, R. D., Chaudhry, S., and Dhiman, S. S. (2010). "Biopulping and its potential to reduce effluent loads from bleaching of hardwood kraft pulp," BioRes. 5(1), 159-171. |
|
5(1)
2010 |
172-186 |
Valto, P., Knuutinen, J., Alén, R., Rantalankila, M., Lehmonen, J., Grönroos, A., and Houni, J. (2010). "Analysis of resin and fatty acids enriched in papermaking process waters," BioRes. 5(1), 172-186. |
|
5(1)
2010 |
187-205 |
Sitholé, B., Shirin, S., Zhang, X., Lapierre, L., Pimentel, J., and Paice, M. (2010). "Deresination options in sulphite pulping," BioRes. 5(1), 187-205. |
|
5(1)
2010 |
206-226 |
Granholm, K., Harju, L., and Ivaska, A. (2010). "Desorption of metal ions from kraft pulps. Part 1. Chelation of hardwood and softwood kraft pulp with EDTA," BioRes. 5(1), 206-226. |
|
5(1)
2010 |
227-243 |
Granholm, K., Harju, L., and Ivaska, A. (2010). "Desorption of metal ions from kraft pulps. Part 2. Chelation of kraft pulps with different complexing agents and with EDTA in a reducing environment," BioRes. 5(1), 227-243. |
|
5(1)
2010 |
244-258 |
Chun, D. T. W., Foulk, J. A., and McAlister, D. D. III. (2010). "Antibacterial properties and drying effects of flax denim and antibacterial properties of nonwoven flax fabric," BioRes. 5(1), 244-258. |
|
5(1)
2010 |
259-267 |
Chalamcherla, V. L., Singaracharya, M. A., and Lakshmi M., V. (2010). "Amino acids profile of the lignocellulosic feed treated with cellulase-free lignolytic mutants of Pleurotus ostreatus," BioRes. 5(1), 259-267. |
|
5(1)
2010 |
268-275 |
Taşkın, E., Eltem, R., and Soyak, E. (2010). "Enhancement of solid state fermentation for production of penicillin G on sugar beet pulp," BioRes. 5(1), 268-275. |
|
5(1)
2010 |
276-290 |
Zhao, Q., Pu, J., Mao, S., and Qi, G. (2010). "Process optimization of tetra acetyl ethylene diamine activated hydrogen peroxide bleaching of populus nigra CTMP," BioRes. 5(1), 276-290. |
|
5(1)
2010 |
291-302 |
Bouiri, B., and Amrani, M. (2010). "Production of dissolving grade pulp from alfa," BioRes. 5(1), 291-302. |
|
5(1)
2010 |
303-315 |
Ding, C., Qian, X., Shen, J., and An, X. (2010). "Preparation and characterization of conductive paper via in-situ polymerization of pyrrole," BioRes. 5(1), 303-315. |
|
5(1)
2010 |
316-323 |
Zabihzadeh, S. M. (2010). "Water uptake and flexural properties of natural filler/HDPE composites," BioRes. 5(1), 316-323. |
|
5(1)
2010 |
324-342 |
Hamdan, S., Talib, Z. A., Rahman, M. R., Ahmed, A. S., and Islam, M. S. (2010). "Dynamic Young's modulus measurement of treated and post-treated tropical wood polymer composites (WPC)," BioRes. 5(1), 324-342. |
|
5(1)
2010 |
343-355 |
Atar, M., Keskin, H., Peker, H., Ustündağ, A., Togay, A., and Candan, Z. (2010). "Impacts of different joint angles and adhesives on diagonal tension perfrmances of box-type furniture," BioRes. 5(1), 343-355. |
|
5(1)
2010 |
356-371 |
Tunc, M. S., Lawoko, M., and van Heiningen, A. (2010). "Understanding the limitations of removal of hemicelluloses during authohydrolysis of a mixture of Southern hardwoods," BioRes. 5(1), 356-371. |
|
5(1)
2010 |
372-388 |
Chand, N., Bajpai, S. K., Joshi, R., and Mary, G. (2010). "Thermomechanical behavior of sisal fibers grafted with poly(acrylamide-co-N-vinyl-2-pyrrolidone) and loaded with silver ions or silver nanoparticles," BioRes. 5(1), 372-388. |
|
5(1)
2010 |
389-396 |
Swapnavahini, K., Srinivas, T., Kumar, P. L., Kumari, M. S., and Lakshmi, T. (2010). "Feasibility study of anaerobic digestion of Ocimum sanctum leaf waste generated from Sanctum sanctorum," BioRes 5(1), 389-396. |
|
5(1)
2010 |
397-418 |
Ibrahim, M. M., Agblevor, F. A., and El-Zawawy, W. K. (2010). "Isolation and characterization of cellulose and lignin from steam-exploded lignocellulosic biomass," BioRes 5(1), 397-418. |
|
5(1)
2010 |
419-437 |
Thirumalisamy, S., and Subbian, M. (2010). "Removal of methylene blue from aqueous solution by activated carbon prepared from the peel of Cucumis sativa fruit by adsorption," BioRes. 5(1), 419-437. |
|
5(1)
2010 |
438-454 |
Srinivasa Rao, K. S., Anand, S., and Venkateswarlu, P. (2010). "Adsorption of cadmium(II) ions from aqueous solution by Tectona grandis l.f. (teak leaves powder)," BioRes. 5(1), 438-454. |
|
5(1)
2010 |
455-476 |
Shallhorn, P., and Gurnagul, N. (2010). "A semi-empirical model of the tensile energy adsorption of sack kraft paper," BioRes. 5(1), 455-476. |
|
5(1)
2010 |
477-487 |
Talaeipour, M., Hemmasi, A. M., Kasmani, J. E., Mirshokraie, S. A., and Khademieslam, H. (2010). "Effects of fungal treatment on structural and chemical features of hornbeam chips," BioRes. 5(1), 477-487. |
|
5(1)
2010 |
488-498 |
Yang, X., Zeng, Y., and Zhang, X. (2010). "Influence of biopretreatment on the character of corn stover lignin as shown by thermogravimetric and chemical structural analyses," BioRes. 5(1), 488-498. |
|
5(2)
2010 |
514-524 |
Kiuru, J., Tsitko, I., Sievänen, J., and Wathén, R. (2010). "Optimization of biocide strategies on fine paper machines," BioRes. 5(2), 514-524. |
|
5(2)
2010 |
525-544 |
Mao, H., Genco, J. M., van Heiningen, A., and Pendse, H. (2010). "Kraft mill biorefinery to produce acetic acid and ethanol: Technical economic analysis," BioRes. 5(2), 525-544. |
|
5(2)
2010 |
545-555 |
Şahin Kol, H., Uysal, B., Kurt, Ş, and Ozcan, C. (2010). "Thermal conductivity of oak impregnated with some chemicals and finished," BioRes. 5(2), 545-555. |
|
5(2)
2010 |
556-562 |
Yao, S., Wu, G., Xing, M., Zhou, S., and Pu, J. (2010). "Determination of lignin content in Acacia spp. using near-infrared reflectance spectroscopy," BioRes. 5(2), 556-562. |
|
5(2)
2010 |
556-575 |
Hasan, S. H., Ranjan, D., and Talat, M. (2010). "Water hyacinth biomass (WHB) for the biosorption of hexavalent chromium : Optimization of process parameters," BioRes. 5(2), 563-575. |
|
5(2)
2010 |
576-585 |
Li, K., Fu, S., Zhan, H., Zhan, Y., and Lucia, L. (2010). "Analysis of the chemical composition and morphological structure of banana pseudo-stem," BioRes. 5(2), 576-585. |
|
5(2)
2010 |
586-597 |
Özçifçi, A., and Özbay, G. (2010). "Impacts of bleaching chemicals and outdoor exposure on changes in the color of some varnished woods," BioRes. 5(2), 586-597. |
|
5(2)
2010 |
598-615 |
Pandey, K. K., Hughes, M., and Vuorinen, T. (2010). "Dimensional stability, UV resistance, and static mechanical properties of Scots pine chemically modified with alkylene expoxides," BioRes. 5(2), 598-615. |
|
5(2)
2010 |
616-633 |
Peng, H., Sun, Y., Zhang, J., and Lin, L. (2010). "Degradation of cellooligosaccharides in oxidative medium and alkaline medium: HPLC, FTIR, and GC-MS analyses," BioRes. 5(2), 616-633. |
|
5(2)
2010 |
634-649 |
Gilleran, C. T., Hernon, A. T., Murray, P. G., and Tuohy, M. G. (2010). "Induction of enzyme cocktails by low cost carbon sources for production of monosaccharide-rich syrups from plant materials," BioRes. 5(2), 634-649. |
|
5(2)
2010 |
650-660 |
Zabihzadeh, S. M. (2010). "Flexural properties and orthotropic swelling behavior of bagasse/thermoplastic composites," BioRes. 5(2), 650-660. |
|
5(2)
2010 |
661-671 |
Mulinari, D. R., Voorwald, H. J. C., Cioffi, M. O. H., Rocha, G. J., and Pinto Da Silva, M. L. C. (2010). "Surface modification of sugarcane bagasse cellulose and its effect on mechanical and water absorption properties of sugarcane bagasse cellulose/HDPE composites," BioRes. 5(2), 661-671. |
|
5(2)
2010 |
672-689 |
Sbiai, A., Maazouz, A., Fleury, E., Sautereau, H., and Kaddami, H. (2010). "Short date palm tree fibers / polyepoxy composites prepared using RTM process: Effect of TEMPO mediated oxidation of the fibers," BioRes. 5(2), 672-689. |
|
5(2)
2010 |
690-698 |
Hosseini Hashemi, S. H., Latibari, A. J., Khademi-Eslam, H., and Alamuti, R. F. (2010). "Effect of boric acid treatment on decay resistance and mechanical properties of poplar wood," BioRes. 5(2), 690-698. |
|
5(2)
2010 |
699-711 |
Akpinar, O., Gunay, K., Yilmaz, Y., Levent, O., and Bostanci, S. (2010). "Enzymatic processing and antioxidant activity of agricultural waste autohydrolysis liquors," BioRes. 5(2), 699-711. |
|
5(2)
2010 |
712-726 |
Li, J., Qian, X., Wang, L., and An, X. (2010). "XPS characterization and percolation behavior of polyaniline-coated conductive paper," BioRes. 5(2), 712-726. |
|
5(2)
2010 |
727-740 |
Siqueira, G., Bras, J., and Dufresne, A. (2010). "Luffa cylindrica as a lignocellulosic source of fiber, microfibrillated cellulose, and cellulose nanocrystals," BioRes. 5(2), 727-740. |
|
5(2)
2010 |
741-757 |
Soni, S. K., Batra, N., Bansal, N., and Soni, R. (2010). "Bioconversion of sugarcane bagasse into second generation bioethanol after enzymatic hydrolysis with in-house produced cellulases from Aspergillus sp. S4B2F," BioRes. 5(2), 741-757. |
|
5(2)
2010 |
758-769 |
Pan, M., Zhou, D., Ding, T., and Zhou, X. (2010). "Water resistance and some mechanical properties of rice straw fiberboards affected by thermal modification," BioRes. 5(2), 758-769. |
|
5(2)
2010 |
770-779 |
Landry, V., Blanchet, P., and Vaillancourt, É. (2010). "Reducing VOC emissions in the furniture and cabinets industries: An opportunity for hybrid coating systems," BioRes. 5(2), 770-779. |
|
5(2)
2010 |
780-795 |
Zhang, Y., Cao, C.-Y., Hou, Q.-X., Feng, W.-Y., Xu, M., Su, Z.-H., Lin, Q.-Y., Zhuang, J.-F., and Lv, W.-J. (2010). "Using a membrane filtration process to concentrate the effluent from alkaline peroxide mechanical pulping plants," BioRes. 5(2), 780-795. |
|
5(2)
2010 |
796-807 |
Sandquist, D., Filonova, L., von Schantz, L., Ohlin, M., and Daniel, G. (2009). "Microdistribution of xyloglucan in differentiating poplar cells," BioRes. 5(2), 796-807 |
|
5(2)
2010 |
808-826 |
Mustjoki, S., Leponiemi, A., and Dahl, O. (2010). "Alkaline peroxide bleaching of hot water treated wheat straw," BioRes. 5(2), 808-826. |
|
5(2)
2010 |
827-837 |
Lou, R., Wu, S.-B., and Lv, G.-J. (2010). "Fast pyrolysis of enzymatic/mild acidolysis lignin from moso bamboo," BioRes. 5(2), 827-837. |
|
5(2)
2010 |
838-853 |
Prasad, A. G. D., and Abdullah, M. A. (2010). "Biosorption of Cr(VI) from synthetic wastewater using the fruit shell of gulhomar (Delonix regia): Application to electroplating wastewater," BioRes. 5(2), 838-853. |
|
5(2)
2010 |
854-869 |
Rahman, M. R., Islam, M. N., Huque, M. M., Hamdan, S., and Ahmed, A. S. (2010). "Effect of chemical treatment on rice husk (RH) reinforced polyethylene (PE) composites," BioRes. 5(2), 854-869. |
|
5(2)
2010 |
870-880 |
Jahan, M. S., Ni, Y., and He, Z. (2010). "Chlorine dioxide bleaching of soda-anthraquinone jute pulp to a very high brightness," BioRes. 5(2), 870-880. |
|
5(2)
2010 |
881-898 |
Barros, D. P., Silva, V. L., Hämäläinen, H., and Colodette, J. L. (2010). "Effect of last stage bleaching with peracetic acid on brightness development and properties of eucalyptus pulp," BioRes. 5(2), 881-898. |
|
5(2)
2010 |
899-907 |
Qian, X., Shen, J., Yu, G., and An, X. (2010). "Influence of pulp fiber substrate on conductivity of polyaniline-coated conductive paper prepared by in-situ polymerization," BioRes. 5(2), 899-907. |
|
5(2)
2010 |
908-919 |
Bhattacharya, P., Hassan, E. B., Steele, P., Cooper, J., and Ingram, L. (2010). "Effect of acid catalysts and accelerated aging on the reaction of methanol with hydroxy-acetaldehyde in bio-oil," BioRes. 5(2), 908-919. |
|
5(2)
2010 |
920-927 |
Saritha, V., and Maruthi, Y. A. (2010). "Soil fungi: Potential mycoremediators of lignocellulosic waste," BioRes.5(2), 920-938. |
|
5(2)
2010 |
928-938 |
Mirahmadi, K., Kabir, M. M., Jeihanipour, A., Karimi, K., and Taherzadeh, M. J. (2010). "Alkaline pretreatment of spruce and birch to improve bioethannol and biogas production," BioRes. 5(2), 928-938. |
|
5(2)
2010 |
939-950 |
Khosravani, A., Latibari, A. J., Mirshokraei, S. A., Rahmanninia, M., and Nazhad, M. M. (2010). "Studying the effect of cationic starch-anionic nanosilica system on retention and drainage," BioRes. 5(2), 939-950. |
|
5(2)
2010 |
951-967 |
Benazir, J. A. F., Manimekalai, V., Ravichandran, P., Suganthi, R., and Dinesh, D. C. (2010). "Properties of fibres/culm strands from mat sedge - Cyperus pangorei Rottb.," BioRes. 5(2), 951-967. |
|
5(2)
2010 |
968-978 |
Jarusombuti, S., Ayrilmis, N., Bauchongkol, P., and Fueangvivat, V. (2010). "Surface characteristics and overlaying properties of MDF panels made from thermally treated rubberwood fibers," BioRes. 5(2), 968-978. |
|
5(2)
2010 |
979-989 |
Shakeri, A., and Staiger, M. P. (2010). "Phase transformations in regenerated microcyrstalline cellulose following dissolution by an ionic liquid," BioRes. 5(2), 979-989. |
|
5(2)
2010 |
990-1009 |
Fox, S. C., and McDonald, A. G. (2010). "Chemical and thermal characterization of three industrial lignins and their corresponding lignin esters," BioRes. 5(2), 990-1009. |
|
5(2)
2010 |
1010-1021 |
Pereira, P. H. F., Voorwald, H. C. J., Cioffi, M. O. H., and Pinto Da Silva, M. L. C. (2010). "Preparation and characterization of cellulose/ hydrous niobium phosphate hybrid," BioRes. 5(2), 1010-1021. |
|
5(2)
2010 |
1022-1035 |
Rahman, M. R., Hamdan, S., Ahmed, A. S., and Islam, M. S. (2010). "Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (PW),"BioRes. 5(2), 1022-1035. |
|
5(2)
2010 |
1036-1054 |
Karaaslan, A. M., Tshabalala, M. A., and Buschle-Diller, G. (2010). "Wood hemicellulose/chitosan-based semi-interpenetrating network hydrogels: Mechanical, swelling and controlled drug release properties," BioRes. 5(2), 1036-1054. |
|
5(2)
2010 |
1055-1073 |
Singha, A. S., and Rana, R. K. (2010). "Effect of pressure induced graft copolymerization on the physico-chemical properties of bio-fibers," BioRes. 5(2), 1055-1073. |
|
5(2)
2010 |
1074-1083 |
Istek, A.,. Aydemir, D., and Aksu, S. (2010). "The effect of decor paper and resin type on the physical, mechanical, and surface quality properties of particleboards coated with impregnated decor papers,"BioRes. 5(2), 1074-1083. |
|
5(2)
2010 |
1083-1101 |
Lee, J. M., Jameel, H., and Venditti, R. A. (2010). "Effect of ozone and autohydrolysis pretreatments on enzymatic digestibility of coastal Bermuda grass," BioRes. 5(2), 1084-1101. |
|
5(2)
2010 |
1102-1113 |
Nechita, P., Dobrin, E., Ciolacu, F., and Bobu, E. (2010). "The biodegradability and mechanical strength of nutritive pots for vegetable planting based on lignocellulose composite materials," BioRes. 5(2), 1102-1113. |
|
5(2)
2010 |
1114-1125 |
Yang, S., Fu, S., Li, X., Zhou, Y., and Zhan, H. (2010). "Preparation of salt-sensitive and antibacterial hydrogel based on quaternized cellulose," BioRes. 5(2), 1114-1125. |
|
5(2)
2010 |
1126-1142 |
Sehlstedt-Persson, M., and Karlsson, O. (2010). "Natural durability and phenolic content in dried Scots pine heartwood," BioRes. 5(2), 1126-1142. |
|
5(2)
2010 |
1143-1155 |
Carvalho, K. C. C., Mulinari, D. R., Voorwald, H. J. C., and Cioffi, M. O. H. (2010). "Chemical modification effect on the mechanical properties of HIPS/coconut fiber composites," BioRes. 5(2), 1143-1155. |
|
5(2)
2010 |
1156-1163 |
Chen, G., Fu, S., Liu, R., Zhan, H., and Chen, Y. (2010). "Analysis of structural changes of Masson pine lignin reacted with superoxide anion radical using NMR spectroscopy," BioRes. 5(2), 1156-1163. |
|
5(2)
2010 |
1164-1177 |
Blomstedt, M., Asikainen, J., Lähdeniemi, A., Ylönen, T., Paltakari, J., and Hakala, T. K. (2010). "Effect of xylanase treatment on dewatering properties of birch kraft pulp," BioRes. 5(2), 1164-1177. |
|
5(2)
2010 |
1178-1196 |
Deng, Y., Wu, Y., Qian, Y., Ouyang, X., Yang, D., and Qiu, X. (2010). "Adsorption and desorption behaviors of lignosulfonate during the self-assembly of multilayers," BioRes. 5(2), 1178-1196. |
|
5(2)
2010 |
1197-1214 |
Agnihotri, S., Dutt, D., and Tyagi, C. H. (2010). "Complete characterization of bagasse of early species of Saccharum officenerum-co 89003 for pulp and paper making," BioRes. 5(2), 1197-1214. |
|
5(2)
2010 |
1215-11231 |
Halvarsson, S., Edlund, H., and Norgren, M. (2010). "Wheat straw as raw material for manufacture of medium density fiberboard (MDF)," BioRes. 5(2), 1215-1231. |
|
5(2)
2010 |
1232-1243 |
Jacobs, A., Botha, A., Reddy, J., and Van Zyl, W. H. (2010). "Sunflower press cake as a substrate for eicosapentaenoic acid production by representatives of the genus Mortierella," BioRes. 5(2), 1232-1243. |
|
5(2)
2010 |
1244-1256 |
Mahmood, T., Malik, S. A., and Hussain, S. T. (2010). "Biosorption and recovery of heavy metals from aqueous solutions by Eichhornia crassipes (water hyacinth) ash," BioRes. 5(2), 1244-1256. |
|
5(2)
2010 |
1257-1267 |
Tuong, V. M., and Li, J. (2010). "Effect of heat treatment on the change in color and dimensional stability of acacia hybrid wood," BioRes. 5(2), 1257-1267. |
|
5(2)
2010 |
1268-1280 |
Shakhes, J.., Dehghani-Firouzabadi, M. R., Rezayati-Charani, P., and Zeinaly, F. (2010). "Evaluation of harvesting time effects and cultivars of kenaf on papermaking," BioRes. 5(2), 1268-1280. |
|
5(2)
2010 |
1281-1291 |
Lv, G.-J., Wu, S.-B., and Lou, R. (2010). "Kinetic study of the thermal decomposition of hemicellulose isolated from corn stalk," BioRes. 5(2), 1281-1291. |
|
5(2)
2010 |
1292-1300 |
Kumar, S., Upadhyaya, J. S., and Negi, Y. S. (2010). "Preparation of nanoparticles from corn cobbs by chemical treatment methods," BioRes. 5(2), 1292-1300. |
|
5(2)
2010 |
1301-1325 |
Mukhopadhyay, S., and Chatterjee, N. C. (2010). "Bioconversion of water hyacinth hydrolysate into ethanol," BioRes. 5(2), 1301-1310. |
|
5(3)
2010 |
1336-1352 |
Thompson, D. W., Hansen, E. N., Knowles, C., and Muszynski, L. (2010). "Opportunities for wood plastic composite products in the U.S. highway construction sector," BioRes. 5(3), 1336-1352. |
|
5(3)
2010 |
1353-1365 |
Xing, M., Yao, S., Zhou, S.-K., Zhao, Q., Lin, J.-H., and Pu, J.-W. (2010). "The influence of ultrasonic treatment on the bleaching of CMP revealed by surface and chemical structural analyses," BioRes. 5(3), 1353-1365. |
|
5(3)
2010 |
1366-1383 |
Kline, L. M., Hayes, D. G., Womac, A. R., and Labbé, N. (2010). "Simplified determination of lignin content in hard and soft woods via UV-spectrophotometric analysis of biomass dissoved in ionic liquids," BioRes. 5(3), 1366-1383. |
|
5(3)
2010 |
1384-1392 |
Babayemi, J. O., Dauda, K. T., Kayode, A. A. A., Nwude, D. O., Ajiboye, J. A., Essien, E. R., and Abiona, O. O. (2010). "Determination of potash alkali and metal contents of ashes obtained from peels of some varieties of Nigeria grown Musa species," BioRes. 5(3), 1384-1392. |
|
5(3)
2010 |
1393-1407 |
Ioelovich, M., Leykin, A., and Figovsky, O. (2010). "Study of cellulose paracrystallinity," BioRes. 5(3), 1393-1407. |
|
5(3)
2010 |
1408-1424 |
Beis, S. H., Mukkamala, S., Hill, N., Joseph, J., Baker, C., Jensen, B., Stemmler, E. A., Wheeler, M. C., Frederick, B. G., van Heiningen, A., Berg, A. G., and DeSisto, W. J. (2010). "Fast pyrolysis of lignins," BioRes. 5(3), 1408-1424. |
|
5(3)
2010 |
1425-1435 |
Shi, B., Shannon, T. G., and Pelky, E. (2010). "Novel use of waste keratin and cotton linter fibers for prototype tissue papers and their evaluation," BioRes. 5(3), 1425-1435. |
|
5(3)
2010 |
1436-1445 |
Stanciu, C. (2010). "Research concerning the use of beechwood prehydrolysates to grow yeasts," BioRes. 5(3), 1436-1445. |
|
5(3)
2010 |
1446-1462 |
Ang, L. S., Leh, C. P., and Lee, C. C. (2010). "Effects of alkaline pre-impregnation and pulping on Malaysia cultivated kenaf (Hibiscus cannabinus)," BioRes. 5(3), 1446-1462. |
|
5(3)
2010 |
1463-1472 |
Vieira, R. S., Lima, J. T., Silva, J. R. M., Hein, P. R. G., Baillères, H., and Baraúna, E. E. P. (2010). "Small wooden objects using eucalypt sawmill wood waste," BioRes. 5(3), 1463-1472. |
|
5(3)
2010 |
1473-1483 |
Altun, S., Burdurlu, E., and Kılıç, M. (2010). "Effect of adhesive type on the bending moment capacity of miter frame corner joints," BioRes. 5(3), 1473-1483. |
|
5(3)
2010 |
1484-1495 |
Feng, H., Li, J., and Wang, L. (2010). "Preparation of biodegradable flax shive cellulose-based superabsorbent polymer under microwave irradiation," BioRes. 5(3), 1484-1495. |
|
5(3)
2010 |
1496-1508 |
Lee, J. M., Jameel, H., and Venditti, R. A. (2010). "One and two stage autohydrolysis pretreatments for enzyme hydrolysis of coastal Bermuda grass to produce fermentable sugars," BioRes. 5(3), 1496-1508. |
|
5(3)
2010 |
1509-1516 |
Wong, Z., Chen, K., and Li, J. (2010). "Formation of vanillin and syringaldehyde in an oxygen delignification process," BioRes. 5(3), 1509-1516. |
|
5(3)
2010 |
1517-1529 |
Rekaby, M. M., El-Thalough, I. A., Rahman, A. A. H., and El-Khabery, S. A. E. (2010). "Technological evaluation of carboxymethyl sesbania galactomannan gum derivatives as thickeners in reactive printing," BioRes. 5(3), 1517-1529. |
|
5(3)
2010 |
1530-1541 |
Zhou, Y., Renneckar, S., Pillai, K. V., Li, Q., Lin, Z., and Church, W. T. (2010). "Layer-by-layer nanoscale bondlines for macroscale adhesion," BioRes. 5(3), 1530-1541. |
|
5(3)
2010 |
1542-1553 |
Azizi Mossello, A., Jalaluddin, H., Resalati, H., Rushdan I., Paridah, M. T., Fallah Shamsi, S. R. and Ainun, Z. M. A. (2010). "Soda-anthraquinone pulp from Malaysian cultivated kenaf for linerboard production," BioRes. 5(3), 1542-1553. |
|
5(3)
2010 |
1554-1564 |
Zamani, A., and Taherzadeh, M. J. (2010). "Production of low molecular weight chitosan by hot dilute sulfuric acid," BioRes. 5(3), 1554-1564. |
|
5(3)
2010 |
1565-1580 |
Zhao, X., van der Heide, E., Zhang, T., and Liu, D. (2010). "Delignification of sugarcane bagasse with alkali and peracetic acid and characterization of the pulp," BioRes. 5(3), 1565-1580. |
|
5(3)
2010 |
1581-1594 |
Chen, H., Chen, Y., Zhan, H., and Fu, S. (2010)."Enhanced biodegradation of pulping effluents by a statistical experimental design using microbial consortia," BioRes. 5(3), 1581-1594. |
|
5(3)
2010 |
1595-1604 |
Azizi Mossello, A., Harun, J., Ibrahim, R., Resalati, H., Shamsi, S. R. F., Tanir, P. M., and Yusoff, M. N. M. (2010). "Evaluation of linerboard properites from Malaysian cultivated kenaf soda-anthraquinone pulps versus commercial pulps," BioRes. 5(3), 1595-1604. |
|
5(3)
2010 |
1605-1617 |
Han, W., Chen, K., Yang, D.-D., Yang, F., Zhao, C., and Gao, W. (2010). "Utilization of bagasse fiber for preparation of biodegradable flame retarding composites (BFRCS)," BioRes. 5(3), 1605-1625. |
|
5(3)
2010 |
1618-1625 |
Kabir, M. A., Huque, M. M., Islam, M. R., and Bledzki, A. K. (2010). "Mechanical properties of jute fiber reinforced polypropylene composite: Effect of chemical treatment by benzenediazonium salt in alkaline medium," BioRes. 5(3), 1618-1625. |
|
5(3)
2010 |
1626-1660 |
Porankiewicz, B., Banski, A., and Wieloch, G. (2010). "Specific resistance and specific intensity of belt sanding of wood," BioRes. 5(3), 1626-1660. |
|
5(3)
2010 |
1661-1674 |
Ranjan, D., and Hasan, S. H. (2010). "Rice bran carbon: An alternative to commercial activated carbon for the removal of hexavalent chromium from aqueous solution," BioRes. 5(3), 1661-1674. |
|
5(3)
2010 |
1675-1688 |
Huber, P., Carré, B., and Zeno, E. (2010). "The effects of several non-oxidizing biocides on fine paper wet-end chemistry," BioRes. 5(3), 1675-1688. |
|
5(3)
2010 |
1689-1701 |
Meenakshi, Singh, G., Bhalla, A., and Hoondal, G. S. (2010). "Solid state fermentation and characterization of partically purified thermostable mannanase from Bacillus sp. MG-33," BioRes. 5(3), 1689-1701. |
|
5(3)
2010 |
1702-1716 |
Sheikhi, P., Talaeipour, M., Hemasi, A. H., Eslam, H. K., and Gumuskaya, E. (2010). "Effect of drying and chemical treatment on bagasse soda pulp properties during recycling," BioRes. 5(3), 1702-1716. |
|
5(3)
2010 |
1717-1732 |
Wang, K., Jiang, J.-X., Xu, F., Sun, R.-C., and Baird, M. S. (2010). "Influence of steam pressure on the physico-chemical properties of degraded hemicelluloses obtained from steam-exploded Lespedeza stalks," BioRes. 5(3), 1717-1732. |
|
5(3)
2010 |
1733-1744 |
Zhao, G., Lai, R., He, B., Greschik, T., and Li, X. (2010). "Replacement of softwood kraft pulp with ECF-bleached bamboo kraft pulp in fine paper," BioRes. 5(3), 1733-1744. |
|
5(3)
2010 |
1745-1761 |
Talebizadeh, A., and Rezayati-Charani, P. (2010). "Evaluation of pulp and paper making characteristics of rice stem fibers prepared by twin-screw extruder pulping," BioRes. 5(3), 1745-1761. |
|
5(3)
2010 |
1762-1778 |
Li, M.-F., Fan, Y.-M., Sun, R.-C., and Xu, F. (2010). "Characterization of extracted lignin of bamboo (Neosinocalamus affinis) pretreated with sodium hydroxide/urea solution at low temperature," BioRes. 5(3), 1762-1778. |
|
5(3)
2010 |
1779-1788 |
Zhou, S., Yao, S., Mian, X., and Pu, J. (2010). "Applied study of birch pulp bleaching using dimethyldioxirane to obtain acetate-grade pulp," BioRes. 5(3), 1779-1788. |
|
5(3)
2010 |
1789-1798 |
Chand, N., Sharma, J., Bapat, M. N., and Nigrawal, A. (2010). "Effect of positional density on DC conductivity of bamboo fibre," BioRes. 5(3), 1789-1798. |
|
5(3)
2010 |
1799-1810 |
Wang, B., He, B., and Li, J. (2010). "Study on lignin coverage of masson pine fiber," BioRes. 5(3), 1799-1810. |
|
5(3)
2010 |
1811-1823 |
Qu, P., Gao, Y., Wu, G.-F., and Zhang, L.-P. (2010). "Nanocomposites of poly(lactic acid) reinforced with cellulose nanofibrils," BioRes. 5(3), 1811-1823. |
|
5(3)
2010 |
1824-1833 |
Buyuksari, U., Avci, E., Ayrilmis, N., and Akkilic, H. (2010). "Effect of pine cone ratio on the wettability and surface roughness of particleboard," BioRes. 5(3), 1824-1833. |
|
5(3)
2010 |
1834-1845 |
El-Wakil, N. A., Fahmy, Y., Abou-Zeid, R. E., Dufresne, A., and El-Sherbiny, S. (2010). "Liquid crystalline behavior of hydroxypropyl cellulose esterified with 4-alkoxybenzoic acid," BioRes. 5(3), 1834-1845. |
|
5(3)
2010 |
1846-1858 |
Chikkol Venkateshappa, S., Bennehalli, B., Kenchappa, M. G., and Ranganagowda, R. P. G. (2010). "Flexural behaviour of areca fibers composites," BioRes. 5(3), 1846-1858. |
|
5(3)
2010 |
1859-1867 |
Ayrilmis, N., and Buyuksari, U. (2010). "Utilization of olive mill sludge in the manufacture of fiberboard," BioRes. 5(3), 1859-1867. |
|
5(3)
2010 |
1868-1878 |
Kurt, R. (2010). "Suitability of three hybrid poplar clones for laminated veneer lumber manufacturing using melamine urea formaldehyde adhesive," BioRes. 5(3), 1868-1878. |
|
5(3)
2010 |
1879-1894 |
Ezhumalai, S., and Thangavelu, V. (2010). "Kinetic and optimization studies on the bioconversion of lignocellulosic material into ethanol," BioRes. 5(3), 1879-1894. |
|
5(3)
2010 |
1895-1907 |
Zhang, X., and Liu, W. (2010). "Sodium titanate nanobelt as a microparticle to induce clay flocculation with CPAM," BioRes. 5(3), 1895-1907. |
|
5(3)
2010 |
1908-1922 |
Leponiemi, A.., Pahkala, K., and Heikkilä, T. (2010). "Storage of chemically pretreated wheat straw - A means to ensure quality raw material for pulp preparation," BioRes. 5(3), 1908-1922. |
|
5(3)
2010 |
1923-1935 |
Dai, Z., and Ni, Y. (2010). "Thermal stability of metal-pitch deposits from a spruce thermomechanical pulp by use of a differential scanning calorimeter," BioRes. 5(3), 1923-1935. |
|
5(3)
2010 |
1936-1944 |
Tumen, I, Aydemir, D., Gunduz, G., Uner, B., and Cetin, H. (2010). "Changes in the chemical structure of thermally treated wood," BioRes. 5(3), 1936-1944. |
|
5(3)
2010 |
1945-1954 |
Cheng, Q., Wang, J., McNeel, J. F., and Jacobson, P. M. (2010). "Water retention value measurements of cellulosic materials using a centrifugal technique," BioRes. 5(3), 1945-1954. |
|
5(4)
2010 |
2029-2039 |
Gu, X., He, M., Shi, Y., and Li, Z. (2010). "Production of aromatic aldehyde by microwave catalytic oxidation of a lignin model compound with La-containing SBA-15/H2O2 systems," BioRes. 2029-2039. |
|
5(4)
2010 |
2040-2050 |
Liu, H., and Wang, L. (2010). "Electroless nickel deposition on Fraxinum mandshurica veneer modified with APTHS for EMI shielding," BioRes. 5(4), 2040-2050. |
|
5(4)
2010 |
2051-2062 |
Lv., G.-J., Wu, S.-B., and Lou, R. (2010). "Characteristics of corn stalk hemicellulose pyrolysis in a tubular reactor," BioRes. 5(4), 2051-2062. |
|
5(4)
2010 |
2063-2080 |
Krongtaew, C., Messner, K., Ters, T., and Fackler, K. (2010). "Characterization of key parameters for biotechnological lignocellulose conversion assessed by FT-NIR spectroscopy. Part 1. Qualitative analysis of pretreated straw," BioRes. 5(4), 2063-2080. |
|
5(4)
2010 |
2081-2096 |
Krongtaew, C., Messner, K., Ters, T., and Fackler, K. (2010). "Characterization of key parameters for biotechnological lignocellulose conversion assessed by FT-NIR spectroscopy. Part 2. Quantitative analysis by partial least squares regression," BioRes. 5(4), 2081-2096. |
|
5(4)
2010 |
2097-2111 |
Shibata, S., Bozlur, R. M., Fukumoto, I., and Kanda, Y. (2010). "Effects of injection temperature on mechanical properties of bagasse/polypropylene injection molding composites," BioRes. 5(4), 2097-2111. |
|
5(4)
2010 |
2112-2122 |
Azizi Mossello, A., Harun, J., Resalati, H., Ibrahim, R., Shmas, S. R. F., and Tahir, P. M. (2010). "New approach to use of kenaf for paper and paperboard production," BioRes. 5(4), 2112-2122. |
|
5(4)
2010 |
2123-2136 |
Dutt, D., Upadhyaya, J. S., and Tyagi, C. H. (2010). "Studies on Hibiscus cannabinus, Hibiscus sabdariffa, and Cannabinus sativa pulp to be a substitute for softwood pulp - Part 1: AS-AQ delignification process," BioRes 5(4), 2123-2136. |
|
5(4)
2010 |
2137-2152 |
Dutt, D., Upadhyaya, J. S., and Tyagi, C. H. (2010). "Studies on Hibiscus cannabinus, Hibiscus sabdariffa, and Cannabinus sativa pulp to be a substitute for softwood pulp - Part 2: SAS-AQ and NSSC-AQ delignification processes," BioRes 5(4), 2137-2152. |
|
5(4)
2010 |
2153-2172 |
Haapala, A., Körkkö, M., Kemppainen, K., MacNeil, D., and Niinimäki, J. (2010). "Purification of white waters by selective flotation," BioRes. 5(4), 2153-2172. |
|
5(4)
2010 |
2173-2183 |
Asikainen, S., Furhmann, A., Ranua, M., and Robertsén, L. (2010). "Effect of birch kraft pulp primary fines on bleaching and sheet properties," BioRes. 5(4), 2173-2183. |
|
5(4)
2010 |
2184-2194 |
Lou, R., Wu, S.-B., Lv, G.-J., and Guo, D.-L. (2010). "Pyrolytic products from rice straw and enzymatic/mild acidolysis lignin (EMAL)," BioRes. 5(4), 2184-2194. |
|
5(4)
2010 |
2195-2207 |
Gu, R., Kokta, B. V., Frankenfeld, K., and Schlufter, K. (2010). "Bacterial cellulose reinforced thermoplastic composites: Preliminary evaluation of fabrication and performance," BioRes. 5(4), 2195-2207. |
|
5(4)
2010 |
2208-2220 |
Attiogbe, F. K., Bose, S. K., Wang, W., McNeillie, A., and Francis, R. C. (2010). "The peroxymonocarbonate anions as pulp bleaching agents. Part 1. Results with lignin model compounds and chemical pulps," BioRes. 5(4), 2208-2220. |
|
5(4)
2010 |
2221-2231 |
Attiogbe, F. K., Wang, W., McNeillie, A., and Francis, R. C. (2010). "The peroxymonocarbonate anions as pulp bleaching agents. Part 2. Mechanical pulp brightening and effects of metal ions," BioRes. 5(4), 2208-2220. |
|
5(4)
2010 |
2232-2238 |
Farahani, M. R. M., and Taghizadeh, F. (2010). "Roughness of esterified eastern cottonwood," BioRes. 5(4), 2232-2238. |
|
5(4)
2010 |
2239-2247 |
Leger, C. A.., Chan, F. D., and Scheider, M. C. (2010). "Fractionation and characterisation of technical ammonium lignosulfonate," BioRes. 5(4), 2239-2247. |
|
5(4)
2010 |
2248-2257 |
Jia, B., and Wang, L. (2010). "Preparation of microwave absorbing nickel-based activated carbon by electroless plating with palladium-free activation," BioRes. 5(4), 2248-2257. |
|
5(4)
2010 |
2258-2267 |
Ghasemi, S., Eshkiki, R. B., Fatehi, P., and Ni, Y. (2010). "Impact of acid washing and chelation on Mg(OH)2-based hydrogen peroxide bleaching of mixed hardwoods CMP at high consistency," BioRes. 5(4), 2258-2267. |
|
5(4)
2010 |
2268-2277 |
López, Y., García, A., Karimi, K., Taherzadeh, M. J., and Martín, C. (2010). "Chemical characterisation and dilute-acid hydrolysis of rice hulls from an artisan mill," BioRes. 5(4), 2268-2277. |
|
5(4)
2010 |
2278-2296 |
Khalil, H. P. S. A., Bhat, I.-u.-H., and Sartika, M. Y. (2010). "Degradation, mechanico-physical, and morphological properties of empty fruit bunch reinforced polyester composites," BioRes. 5(4), 2278-2296. |
|
5(4)
2010 |
2297-2306 |
Ladeira, N. C., Peixoto, V. J., Penha, M. P., Barros, E. B. P., and Leite, S. G. F. (2010). "Optimization of 6-pentyl-alpha-pyrone production by solid state fermentation using sugarcane bagasse as residue," BioRes. 5(4), 2297-2306. |
|
5(4)
2010 |
2307-2322 |
Fan, M. (2010). "Characterization and performance of elementary hemp fibres: Factors influencing tensile strength," BioRes. 5(4), 2307-2322. |
|
5(4)
2010 |
2323-2336 |
Qu, P., Tang, H., Gao, Y., Zhang, L.-P., and Wang, S. (2010). "Polyethersulfone composite membrane blended with cellulose fibrils," BioRes. 5(4), 2323-2336. |
|
5(4)
2010 |
2337-2347 |
Schwartz, T. J., and Lawoko, M. (2010). "Removal of acid-soluble lignin from biomass extracts using Amberlite XAD-4 Resin," BioRes. 5(4), 2337-2347. |
|
5(4)
2010 |
2348-2361 |
Sasso, C., Beneventi, D., Zeno, E., Chaussy, D., Petit-Conil, M., Nortier, P., and Belgacem, N. (2010). "Polypyrrole synthesis via carboxymethylcellulose-iron complexes," BioRes. 5(4), 2348-2361. |
|
5(4)
2010 |
2362-2373 |
Stajić, M., Kukavica, G., Vukojević, J., Simonić, J., Veljović-Jovanović, S., and Duletić-Laušević, S. (2010). "Wheat straw conversion by enzymatic system of Ganoderma lucidum," BioRes. 5(4), 2362-2373. |
|
5(4)
2010 |
2374-2390 |
Pirraglia, A., Gonzalez, R., and Saloni, D. (2010). "Techno-economical analysis of wood pellets production for U.S. manufacturers," BioRes. 5(4), 2374-2390. |
|
5(4)
2010 |
2391-2403 |
Mahdavi, S., Kermanian, H., and Varshoei, A. (2010). "Comparison of mechanical properties of date palm fiber-polyethyelene composite," BioRes. 5(4), 2391-2403 |
|
5(4)
2010 |
2404-2416 |
Kurian, J. K., Minu, A. K., Banerji, A., and Kishore, V. V. N. (2010). "Bioconversion of hemicellulose hydrolysate of sweet sorghum bagasse to ethanol by using Pichia stipitis NCIM 3497 and Debaryomyces hansenii sp.," BioRes. 5(4), 2404-2416. |
|
5(4)
2010 |
2417-2430 |
Ogunsile, B. O., and Quintana, G. C. (2010). "Modeling of soda-ethanol pulps from Carpolobia lutea, BioRes. 5(4), 2417-2430. |
|
5(4)
2010 |
2431-2446 |
Zhong, L., Fu, S., Li, F., and Zhan, H. (2010). "Chlorine dioxide treatment of sisal fibre: Surface lignin and its influences on fibre surface characteristics and interfacial behaviour of sisal fibre/phenolic resin composites," BioRes. 5(4), 2431-2446. |
|
5(4)
2010 |
2447-2456 |
Hu, J., Xu, G., Liu, J., Lei, T., and Shen, S. (2010). "Finite element modeling simulation in the straw pellet cold compressing molding process," BioRes. 5(4), 2447-2456. |
|
5(4)
2010 |
2457-2469 |
Hoseinpour, H., Karimi, K., Zilouei, H., and Taherzadeh, M. J. (2010). "Simultaneous pretreatment of lignocellulose and hydrolysis of starch in mixtures to sugars," BioRes. 5(4), 2457-2469. |
|
5(4)
2010 |
2470-2477 |
Rao, M., Varma, A. J., and Deshmukh, S. S. (2010). "Production of single cell protein, essential amino acids, and xylanase by Penicillium janthinellum," BioRes. 5(4), 2470-2477. |
|
5(4)
2010 |
2478-2501 |
Esmeraldo, M. A., Barreto, A. C. H., Freitas, J. E. B., Fechine, P. B. A., Sombra, A. S. B., Corradini, E., Mele, G., Maffezzoli, A., and Massetto, S. E. (2010). "Dwarf-gren coconut fibers: A versatile natural renewable raw bioresource. Treatment, morphology, and physicochemical properties," BioRes. 5(4), 2478-2501. |
|
5(4)
2010 |
2502-2519 |
Kautto, J., Saukkonen, E., and Henricson, K. (2010). "Digestibility and paper-making properties of prehydrolyzed softwood chips," BioRes. 5(4), 2502-2519. |
|
5(4)
2010 |
2520-2534 |
Mayeli, N., and Talaeipour, M. (2010). "Effect of different HLB value and enzymatic treatment on the properties of old newspaper deinked pulp," BioRes. 5(4), 2520-2534. |
|
5(4)
2010 |
2535-2546 |
Rodriguez, M., Rodrigues, A., Bayer R., J., Vilaseca, F., Girones, J., and Mutje, P. (2010). "Determination of corn stalk fibers' strength through modeling of the mechanical properties of its composites," BioRes. 5(4), 2535-2546. |
|
5(4)
2010 |
2547-2555 |
Sharma, R. K., Singh, J., and Chauhan, G. S. (2010). "Study of immobilization of protease and sorption of BSA on cellulose, cellulose derivatives, and graft copolymers," BioRes. 5(4), 2547-2555. |
|
5(4)
2010 |
2556-2566 |
Jonoobi, M., Harun, J., Tahir, P. M., Zaini, L. H., SaifulAzry, S., and Makinejad, M. D. (2010). "Characteristics of nanofibers extracted from kenaf core," BioRes. 5(4), 2556-2566. |
|
5(4)
2010 |
2567-2580 |
Loureiro, P. E. G., Domingues, E. F., Evtuguin, D. V., and Carvalhol, M. G., V. S. (2010). "ECF bleaching with a final hydrogen peroxide stage: Impact of the chemical composition of Eucalyptus globulus kraft pulp," BioRes. 5(4), 2567-2580. |
|
5(4)
2010 |
2581-2590 |
Wu, G.-F., Lang, Q., Qu, P., Jiang, Y.-F., and Pu, J. (2010). "Effect of chemical modification and hot-press drying on poplar wood," BioRes. 5(4), 2581-2590. |
|
5(4)
2010 |
2591-2610 |
González, D., Campos, A. R., Cunha, A. M., Santos, V., and Parajó, J. C. (2010). "Utilization of fibers obtained by peroxyformic acid processing of broom as reinforcing agents for biocomposites," BioRes. 5(4), 2591-2610. |
|
5(4)
2010 |
2611-2624 |
Hamdan, S., Rahman, M. R., Ahmed, A. S., Talib, Z. A., and Islam, M. S. (2010). "Influence of N,N-dimethylacetamid on the thermal and mechanical properties of polymer-filled wood," BioRes. 5(4), 2611-2624. |
|
5(4)
2010 |
2625-2639 |
He, Z., Ni, Y., and Zhou, Y. (2010). "Presence of hardwood chips and its impact on pulp strength properties in the production of bleached softwood kraft pulp," BioRes. 5(4), 2625-2639. |
|
5(4)
2010 |
2640-2663 |
Dogu, D., Tirak, K., Candan, Z., and Unsal, O. (2010). "Anatomical investigation of thermally compressed wood panels," BioRes. 5(4), 2640-2663. |
|
5(4)
2010 |
2664-2680 |
Kiuru, J., Tukiainen, P., and Tsitko, I. (2010). "Electrochemically generated biocides for controlling contamination in papermaking," BioRes. 5(4), 2664-2680. |
|
5(4)
2010 |
2681-2689 |
Wang, Q., Chen, K., Li, J., Liu, S., and Wang, Z. (2010). "A rapid method for determination of silicon content in black liquor by UV spectroscopy," BioRes. 5(4), 2681-2689. |
|
5(4)
2010 |
2690-2701 |
Ozkaya, K., Burdurlu, E., Ilce, A. C., and Ciritcioglu, H. H. (2010). "Diagonal tensile strength of an oriented strand-board (OSB) frame with dovetail corner joint," BioRes. 5(4), 2690-2701. |
|
5(4)
2010 |
2702-2719 |
Allix, J., Beneventi, D., Zeno, E., and Nortier, P. (2010). "Flotation de-inking of 50% ONP/ 50% OMG recovered papers mixtures using nonionic surfactant, soap, and surfactant/soap blends," BioRes. 5(4), 2702-2719. |
|
5(4)
2010 |
2720-2737 |
Khalil, H. P. S. A., Bhat, I. H., and Awang, K. B. (2010). "Preliminary study on enhanced properties and biological resistance of chemically modified Acacia spp.,"BioRes. 5(4), 2720-2737. |
|
5(4)
2010 |
2738-2750 |
Popil, R. E. (2010). "High stiffness surface coating optimization through starch encapsulation of platy kaolin," BioRes. 5(4), 2738-2750. |
|
5(4)
2010 |
2751-2764 |
Bäckström, M., and Hammar, L.-A. (2010). "The influence of the counter-ions to the charged groups on the refinability of never-dried bleached pulps," BioRes. 5(4), 2751-2764. |
|
6(1)
2011 |
3-21 |
Sánchez, R., Ferrer, A., Serrano, L., Toledano, A., Labidi, J., and Rodríguez, A. (2011). "Hesperaloe funifera as a raw material for integral utilization of its components," BioRes. 6(1), 3-21. |
|
6(1)
2011 |
22-33 |
Mahdavi, M., Ahmad, M. B., Haron, M. J., and Rahman, M. Z. A. (2011). "Adsorption of Cr(III) from aqueous solutions by polyacrylamide-grafted rubberwood fibre: Kinetics, equilibrium, and thermodynamic studies," BioRes. 6(1), 22-33. |
|
6(1)
2011 |
34-47 |
Badger, P., Badger, S., Puettmann, M., Steele, P., and Cooper, J. (2011). "Techno-economic analysis: Preliminary assessment of pyrolysis oil production costs and material energy balance associated with a transportable fast pyrolysis system," BioRes. 6(1), 34-47. |
|
6(1)
2011 |
48-58 |
Jahan Latibari, A., Hossein, M. A., and Hosseinpour, R. (2011). "Application of alkaline sulfite pulping on corn stalks," BioRes. 6(1), 48-58. |
|
6(1)
2011 |
59-69 |
Hosseini Hashemi, S. K., and Jahan Latibari, A. (2011). "Evaluation and identification of walnut heartwood extractives for protection of poplar wood," BioRes. 6(1), 59-69. |
|
6(1)
2011 |
70-80 |
Jia, B., Su, L., Han, G., Wang, G., Zhang, J., and Wang, L. (2011). "Adsorption properties of nickel-based magnetic activated carbon prepared by Pd-free electroless plating," BioRes. 6(1), 70-80. |
|
6(1)
2011 |
81-102 |
Belhassen, R., Vilaseca, F., Mutjé, P., and Boufi, S. (2011). "Preparation and properties of starch-based biopolymers modified with difunctional isocyanates," BioRes. 6(1), 81-102. |
|
6(1)
2011 |
103-120 |
Kaur, H., Dutt, D., and Tyagi, C. H. (2011). "Optimization of soda pulping process of ligno-cellulosic residues of lemon and sofia grasses produced after steam distillation," BioRes. 6(1), 103-120. |
|
6(1)
2011 |
121-143 |
Mishra, S. P., Thirree, J., Manent, A.-S., Chabot, B., and Daneault, C. (2011). "Ultrasound-catalyzed TEMPO-mediated oxidation of native cellulose for the production of nanocellulose: Effect of process variables," BioRes. 6(1), 121-143. |
|
6(1)
2011 |
144-153 |
Gao, W.-H., Chen, K.-F., Yang, R.-D., Yang, F., and Han, W.-J. (2011). "Properties of bacterial cellulose and its influence on the physical properties of paper," BioRes. 6(1), 144-153. |
|
6(1)
2011 |
154-177 |
Singh, S., Dutt, D., and Tyagi, C. H. (2011). "Complete characterization of wheat straw (Triticum aestivum PBW-343 L. Emend. Fiori & Paul.) - A renewable source of fibers for pulp and paper making," BioRes. 6(1), 154-177. |
|
6(1)
2011 |
178-195 |
Ioelovich, M., and Leykin, A. (2011). "Study of sorption properties of cellulose and its derivatives," BioRes. 6(1), 178-195. |
|
6(1)
2011 |
196-206 |
Cheng, H., Zhan, H., Fu, S., and Lucia, L. A. (2011). "Alkali extraction of hemicellulose from depithed corn stover and effects on soda-AQ pulping," BioRes. 6(1), 196-206. |
|
6(1)
2011 |
207-218 |
Kumar, P., Negi, Y. S., and Singh, S. P. (2011). "Offset printing behavior of baggase and hardwood paper sheets loaded by in-situ precipitation," BioRes. 6(1), 207-218. |
|
6(1)
2011 |
219-231 |
Lyytikäinen, K., Saukkonen, E., Kajanto, I., and Käyhkö, J. (2011). "The effect of hemicellulose extraction on fiber charge properties and retention behavior of kraft pulp fibers," BioRes. 6(1), 219-231. |
|
6(1)
2011 |
232-242 |
Si, C.-L., Lu, Y.-Y., Zhang, Y., Xu, J., Qin, P.-P., Sun, R.-C., and Ni., Y.-H. (2011). "Antioxidative low molecular weight extractives from triploid Populus tomentosa xylem," BioRes. 6(1), 232-242. |
|
6(1)
2011 |
243-252 |
Kang, S., Li, B., Chang, J., and Fan, J. (2011). "Antioxidant abilities comparison of lignins with their hydrothermal liquefaction products," BioRes. 6(1), 243-252. |
|
6(1)
2011 |
253-264 |
Zhou, X., Tan, L, Zhang, W., Lv, C., Zheng, F., Zhang, R., Du, G., Tang, B., and Liu, X. (2011). "Enzymatic hydrolysis lignin derived from corn stover as an intrinsic binder for bio-composites manufacture: Effect of fiber moisture content and pressing temperature on boards' properties," BioRes. 6(1), 253-264. |
|
6(1)
2011 |
265-281 |
Khiari, R., Mauret, E., Belgacem, M. N., and Mhemmi, F. (2011). "Tunisian date palm rachis used as an alternative source of fibres for papermaking applications," BioRes. 6(1), 265-281. |
|
6(1)
2011 |
282-290 |
Díaz, R., Alonso, S., Sánchez, C., Tomasini, A., Bibbins-Martínez, M., and Díaz-Godínez, G. (2011). "Characterization of the growth and laccase activity of strains of Pleurotus ostreatus in submerged fermentation," BioRes. 6(1), 282-290. |
|
6(1)
2011 |
291-307 |
Shahriarinour, M., Wahab, M. N. A., Mustafa, S., Mohamad, R., and Ariff, A. B. (2011). "Effect of various pretreatments of oil palm empty fruit bunch fibres for subsequent use as substrate on the performance of cellulase production by Aspergillus terreus," BioRes. 6(1), 291-307. |
|
6(1)
2011 |
308-316 |
Candan, Z., Ayrilmis, N., and Akbulut, T. (2011). "Dimensional stability performance of fire retardant treated veneer-oriented strandboard composites," BioRes. 6(1), 308-316. |
|
6(1)
2011 |
317-328 |
Sun, R., Song, X., Sun, R., and Jiang, J. (2011). "Effect of lignin content on enzymatic hydrolysis of furfural residues," BioRes. 6(1), 317-328. |
|
6(1)
2011 |
329-343 |
Young, T. M., Zaretski, R. L., Perdue, J. H., Guess, F. M., and Liu, X. (2011). "Logistic regression models of factors influencing the location of bioenergy and biofuels plants," BioRes. 6(1), 329-343. |
|
6(1)
2011 |
344-355 |
Vargas Radillo, J. J., Ruiz-López, M. A., Rodríguez Macías, R., Barrientos Ramírez, L., García-López, P. M., and López-Dellamary Toral, F. A. (2011). "Fermentable sugars from lupinus rotundiflorus biomass by concentrated hydrochloric acid hydrolysis,"BioRes. 6(1), 344-355. |
|
6(1)
2011 |
356-372 |
Karlsson, O., Sidorova, E., and Morén, T. (2011). "Influence of heat transferring media on durability of thermally modified wood," BioRes. 6(1), 356-372. |
|
6(1)
2011 |
373-385 |
Fang. C.-H., Cloutier, A., Blanchet, P., Koubaa, A., and Mariotti, N. (2011). "Densification of wood veneers combined with oil-heat treatment. Part 1: Dimensional stability," BioRes. 6(1), 373-385. |
|
6(1)
2011 |
386-399 |
Roohnia, M., Hossein, M.-A., Alavi-Tabar, S.-E., Tajdini, A., Jahan-Latibari, A., and Manouchehri, N. (2011). "Acoustic properties in Arizona cypress logs: A tool to select wood for sounding board," BioRes. 6(1), 386-399. |
|
6(1)
2011 |
400-413 |
Spiridon, I., Teacă, C.-A., and Bodîrlău, R. (2011). "Structural changes evidenced by FTIR spectroscopy in cellulosic materials after pre-treatment with ionic liquid and enzymatic hydrolysis," BioRes. 6(1), 400-413. |
|
6(1)
2011 |
414-433 |
Yuan, T.-Q., Sun, S., Xu, F., and Sun, R.-C. (2011). "Isolation and physico-chemical characterization of lignins from ultrasound irradiated fast-growing poplar wood," BioRes. 6(1), 414-433. |
|
6(1)
2011 |
434-446 |
Miklečić, J., Jirouš-Rajković, V., Antonović, A., and Španić, N. (2011). "Discolouration of thermally modified wood during simulated indoor sunlight exposure," BioRes. 6(1), 434-446. |
|
6(1)
2011 |
447-463 |
Pathak, P., Bhardwaj, N. K., and Singh, A. K. (2011). "Optimization of chemical and enzymatic deinking of photocopier waste paper," BioRes. 6(1), 447-463. |
|
6(1)
2011 |
464-476 |
Zhang, Y., Gu, J., Tan, H., Di, M., Zhu, L, and Weng, X. (2011). "Straw based particleboard bonded with composite adhesives," BioRes. 6(1), 464-476. |
|
6(1)
2011 |
477-486 |
García-Ortuño, T., Andréu-Rodríguez, J., Ferrández-García, M. T., Ferrández-Villena, M.., and Ferrández-García, C. E. (2011). "Evaluation of the physical and mechanical properties of particleboard made from giant reed (Arundo donax L.)," BioRes. 6(1), 477-486. |
|
6(1)
2011 |
487-512 |
Frone, A. N., Panaitescu, D. M., Donescu, D., Spataru, C. I., Radovici, C., Trusca, R., and Somoghi, R. (2011). "Preparation and characterisization of PVA composites with cellulose nanofibers obtained by ultrasonication," BioRes. 6(1), 487-512. |
|
6(1)
2011 |
513-528 |
Martin-Sampedro, R., Eugenio, M. E., Revilla, E., Martín, J. A., and Villar, J. C. (2011). "Integration of kraft pulping on a forest biorefinery by the addition of a steam explosion pretreatment," BioRes. 6(1), 513-528. |
|
6(1)
2011 |
529-536 |
Ogundiran, M. B., Babayemi, J. O., and Nzeribe, C. G. (2011). "Determination of metal content and an assessment of the potential use of waste cashew nut ash (CNSA) as a source for potash production," BioRes.6(1), 529-536. |
|
6(1)
2011 |
537-551 |
Munusamy, K., Somani, R. S., and Bajaj, H. C. (2011). "Tamarind seeds carbon: Preparation and methane uptake," BioRes. 6(1), 537-551. |
|
6(1)
2011 |
552-569 |
Bansal, N., Tewari, R., Gupta, J. K., Soni, R., and Soni, S. K. (2011). "A novel strain of Aspergillus niger producing a cocktail of hydrolytic depolymerising enzymes for the production of second generation biofuels," BioRes. 6(1), 552-569. |
|
6(1)
2011 |
570-583 |
Mocchiutti, P., Galván, M. V., Inalbon, M. C., and Zanuttini, M. A. (2011). "Improvement of paper properties of recycled unbleached softwood kraft pulps by poly(allylamine hydrochloride), BioRes. 6(1), 570-583. |
|
6(1)
2011 |
584-593 |
Kord, B., Ismaeilimoghadam, S., and Malekian, B. (2011). "Effect of immersion temperature on the water uptake of polypropylene/ wood flour/ organoclay hybrid nanocoposite," BioRes. 6(1), 584-593. |
|
6(1)
2011 |
594-605 |
Zeng, J.-S., Chen, K.-F., and Li, J. (2011). "Study of the bulk density of high consistency pulp and engineering application in the bleaching tower," BioRes. 6(1), 594-605. |
|
6(1)
2011 |
606-614 |
Wang, J., Li, J., Li, S., Freitang, C., and Morrell, J. J. (2011). "Antifungal activities of Cunninghamia lanceolata heartwood extractives," BioRes. 6(1), 606-614. |
|
6(1)
2011 |
615-630 |
Niu, M., Zhao, G.-J., and Alma, M. H. (2011). "Thermogravimetric studies on condensed wood residues in polyhydric alcohols liquefaction," BioRes. 6(1), 615-630. |
|
6(1)
2011 |
631-640 |
Sun, Y., Lin, C.-X., Liu, M.-H., and Liu, Y.-F. (2011). "Equilibrium adsorption behaviors and kinetic characteristics of oxymatrine on a spherical cellulose adsorbert," BioRes. 6(1), 631-640. |
|
6(1)
2011 |
641-655 |
Rusu, M., Mörseburg, K., Gregersen, Ø., Yamakawa, A., and Liukkonen, S. (2011). "Relation between fibre flexibility and cross-sectional properties," BioRes. 641-655. |
|
6(1)
2011 |
656-671 |
Sang, Y., McQuaid, M., and Englezos, P. (2011). "Optimization of chemical use for highly filled mechanical grade papers with precipitated calcium carbonate," BioRes. 656-671. |
|
6(1)
2011 |
672-685 |
Laitinen, O., Kemppainen, K., Stoor, T., and Niinimäki, J. (2011). "Fractionation of pulp and paper particles selectively by size," BioRes. 6(1), 672-685. |
|
6(1)
2011 |
686-699 |
Gong, Y., Lin , L., and Yan, Z. (2011). "Catalytic hydrogenation and oxidation of biomass-derived levulinic acid," BioRes. 6(1), 686-699. |
|
6(1)
2011 |
700-706 |
Shnawa, H. A., Muhsen, M. G., Aldaeem, D. A., Ibraheem, I. K., Gumaa, F. M., and Saleh A. I. (2011). "Synthesis of barium tannate from eucalyptus bark and its use as a thermal stabilizer for poly(vinyl chloride)," BioRes. 6(1), 700-706. |
|
6(1)
2011 |
707-720 |
Xu, J., Chen, Y., Cheng, J. J., Sharma-Shivappa, R. R., and Burns, J. C. (2011). "Delignification of switchgrass cultivars for bioethanol production," BioRes. 6(1), 707-720. |
|
6(1)
2011 |
721-736 |
Li, L., Lee, S., Lee, H. L., and Youn, H. J. (2011). "Hydrogen peroxide bleaching of hardwood kraft pulp with adsorbed birch xylan and its effect on paper properties," BioRes. 6(1), 721-736. |
|
6(1)
2011 |
737-750 |
Islam, M. S., Hamdan, S., Rahman, M. R., Jusoh, I., Ahmed, A. S., and Idrus, M. (2011). "Dynamic Young's modulus, morphological, and thermal stability of 5 tropical light hardwoods modified by benzene diazonium salt treatment," BioRes. 6(1), 737-750. |
|
6(1)
2011 |
751-761 |
Udohitinah, J. S., and Oluwadare, A. O. (2011). "Pulping properties of kraft pulp of Nigerian-grown kenaf (Hibiscus cannabinus L.)," BioRes. 6(1), 751-761. |
|
6(1)
2011 |
762-790 |
Karunanithy, C., and Muthukumarappan, K. (2011). "Optimization of alkali, big bluestem particle size, and extruder parameters for maxium enzymatic sugar recovery using response surface methodology," BioRes. 6(1), 762-790. |
|
6(1)
2011 |
791-806 |
Vishtal, A., Rousu, P., Hultholm, T., Turku, K., Paananen, P., and Käyhkö, J. (2011). "Drainage and retention enhancement of a wheat straw-containing pulp furnish using microparticle retention aids," BioRes. 6(1), 791-806. |
|
6(1)
2011 |
807-822 |
Via, B. K., Fasina, O., and Pan, H. (2011). "Assessment of pine biomass density through mid-infrared spectroscopy and multivariate modeling," BioRes. 6(1), 807-822. |
|
6(1)
2011 |
823-840 |
Bose, S. K., Leavitt, A., Stromberg, B., Kanungo, D., and Francis, R. C. (2011). "Inclusion of a pressurized acidolysis stage in chemical pulp bleaching," BioRes. 6(1), 823-840. |
|
6(1)
2011 |
841-852 |
Farsheh, A. T., Talaeipour, M., Hemmasi, A. H., Khademieslam, H., and Ghasemi, I. (2011). "Investigation on the mechanical and morphological properties of foamed nanocomposites based on wood flour/PVC/multi-walled carbon nanotube," BioRes. 6(1), 841-852. |
|
6(1)
2011 |
853-866 |
Ko, C.-H., Chen, F.-J., Liao, W.-J., and Shih, T.-L. (2011). "Impacts of lignin contents and yeast extract addition on the interaction between spruce pulps and crude recombinant Paenibacillus endoglucanase," BioRes. 6(1), 853-866. |
|
6(1)
2011 |
867-878 |
Pereira, P. H. F., Voorwald, H. J. C., Cioffi, M. O. H., and Da Silva, M. L. C. P. (2011). "Novel cellulose/ NbOPO4.nH2O hybrid material from sugarcane bagasse," BioRes. 6(1), 867-878. |
|
6(1)
2011 |
879-890 |
Shi, S., Shi, S. Q., Barnes, H. M., and Pittman, C. U., Jr. (2011). "A chemical process for preparing cellulosic fibers hierarchically from kenaf bast fibers," BioRes. 6(1), 879-890. |
|
6(1)
2011 |
891-900 |
Imani, R., Talaiepour, M., Dutta, J., Ghobadinezhad, M. R., Hemmasi, A. H., and Nazhad, M. M. (2011). "Production of antibacterial filter paper from wood cellulose," BioRes. 6(1), 891-900. |
|
6(2)
2011 |
920-926 |
Lundquist, K., and Parkås, J. (2011). "Different types of phenolic units in lignins," BioRes. 6(2), 920-926. |
|
6(2)
2011 |
927-935 |
Kord, B., and Kord, B. (2011). "Heavy metal levels in pine (Pinus eldarica Medw.) tree barks as indicators of atmospheric pollution," BioRes. 6(2), 927-935. |
|
6(2)
2011 |
936-949 |
Yu, X., Zhang, G., Xie, C., Yu, Y., Cheng, T., and Zhou, Q. (2011). "Equilibrium, kinetic, and thermodynamic studies of hazardous dye neutral red biosorption by spent corncob substrate," BioRes. 6(2), 936-949. |
|
6(2)
2011 |
950-960 |
Nosbi, N., Akil, H. M., Mohd Ishak, Z. A., and Abu Baker, A. (2011). "Behavior of kenaf fibers after immersion in several water conditions," BioRes. 6(2), 950-960. |
|
6(2)
2011 |
961-970 |
Pervaiz, M., and Sain, M. (2011). "Protein extraction from secondary sludge of paper mill wastewater and its utilization as a wood adhesive," BioRes. 6(2), 961-970. |
|
6(2)
2011 |
971-986 |
García, J. C., Zamudio, M. A. M., Pérez, A., Feria, M. J., Gomide, J. L., Colodette, J. L., and López, F. (2011). "Soda-AQ pulping of Paulownia wood after hydrolysis treatment," BioRes. 6(2), 971-986. |
|
6(2)
2011 |
987-1018 |
Dogu, D., Kose, C., Kartal, S. N., and Erdin, N. (2011). "Wood identification of wooden marine piles from the ancient Byzantine port of Eleutherius/ Theodosius," BioRes. 6(2), 987-1018. |
|
6(2)
2011 |
1019-1028 |
Lal, M., Dutt, D., Tyagi, C. H., Kaur, H., and Kumar, A. (2011). "Bio-conventional bleaching of kraft-AQ pulp of A. cadamba by crude xylanases from Coprinellus disseminatus MLK-03 and effect of residual enzyme on effluent load," BioRes. 6(2), 1019-1028. |
|
6(2)
2011 |
1029-1042 |
Guo, W.-J., Wang, Y., Huang, M-Z., Wan, J.-Q., and Ma, Y.-W. (2011). "An investigation of the variation of pore structure in Eucalyptus fibre during recycling," BioRes. 6(2), 1029-1042. |
|
6(2)
2011 |
1043-1052 |
Abdul Khalil, H. P. S., Jawaid, M., and Abu Bakar, A. (2011). "Woven hybrid composites: Water absorption and thickness swelling behaviors," BioRes. 6(2), 1043-1052. |
|
6(2)
2011 |
1053-1068 |
Meza, P. R., Felissia, F. E., and Area, M. C. (2011). "Reduction of the recalcitrant COD of high yield pulp mills effluents by AOP. Part 1. Combination of ozone and activated sludge," BioRes. 6(2), 1053-1068. |
|
6(2)
2011 |
1069-1078 |
Tang, J., Chen, K., Xu, J., Li, J., and Zhao, C. (2011). "Effects of dilute acid hydrolysis on composition and structure of cellulose in Eulaliopsis binata," BioRes. 6(2), 1069-1078. |
|
6(2)
2011 |
1079-1093 |
Liu, J.-Y., Wu, S.-B., and Lou, R. (2011). "Chemical structure and pyrolysis response of beta-O-4 lignin model polymer," BioRes. 6(2), 1079-1093. |
|
6(2)
2011 |
1094-1104 |
Leponiemi, A., Johansson, A., and Sipilä, K. (2011). "Assessment of combined straw pulp and energy production," BioRes. 6(2), 1094-1104. |
|
6(2)
2011 |
1105-1121 |
van de Pas, D., Hickson, A., Donaldson, L, Lloyd-Jones, G., Tamminen, T., Fernyhough, A., and Mattinen, M.-L. (2011). "Characterization of fractionated lignins polymerized by fungal laccases," BioRes. 6(2), 1105-1121. |
|
6(2)
2011 |
1122-1135 |
Abdul Khalil, H. P. S., and Suraya, N. L. (2011). "Anhydride modification of cultivated kenaf bast fibers: Morphological, spectroscopic, and thermal studies," BioRes. 6(2), 1122-1135. |
|
6(2)
2011 |
1136-1146 |
Qin, Z.-Y., Tong, G.-L., Chin, Y. C. F., and Zhou, J.-C. (2011). "Preparation of ultrasonic-assisted high carboxylate content cellulose nanocrystals by TEMPO oxidation," BioRes. 6(2), 1136-1146. |
|
6(2)
2011 |
1147-1157 |
Kargarfard, A., and Jahan-Latibari, A. (2011). "The performance of corn and cotton stalks for medium density fiberboard production," BioRes. 6(2), 1147-1157. |
|
6(2)
2011 |
1158-1171 |
Vallejos, M. E., Felissia, F. E., Curvelo, A. A. S., Zambon, M. D., Ramos, L., and Area, M. C. (2011). "Chemical and physico-chemical characterization of lignins obtained from ethanol-water fractionation of bagasse," BioRes. 6(2), 1158-1171. |
|
6(2)
2011 |
1172-1185 |
Saadat-Nia, M. A., Brancheriau, L., Gallet, P., Enayati, A. A., Pourtahmasi, K., and Honarvar, F. (2011). "Ultrasonic wave parameter changes during propagation through poplar and spruce reaction wood," BioRes. 6(2), 1172-1185. |
|
6(2)
2011 |
1186-1195 |
Jia, N., Li, S.-M., Ma, M.-G., Zhu, J.-F., and Sun, R.-C. (2011). "Synthesis and characterization of cellulose-silica composite fiber in ethanol/water mixed solvents," BioRes. 6(2), 1186-1195. |
|
6(2)
2011 |
1196-1203 |
Zhou, Q., Cai, Y., Xu, Y., and Zhang, X. (2011). "Determination of moisture diffusion coefficient of larch board with finite difference method," BioRes. 6(2), 1196-1203. |
|
6(2)
2011 |
1204-1218 |
Pierre, F., Almeida, G., Brito, J. O., and Perré, P. (2011). "Influence of torrefaction on some chemical and energy properties of maritime pine and pedunculate oak," BioRes. 6(2), 1204-1218. |
|
6(2)
2011 |
1219-1229 |
Blanchard, V., and Blanchet, P. (2011). "Color stability for wood products during use: Effects of inorganic nanoparticles," BioRes. 6(2), 1219-1229. |
|
6(2)
2011 |
1230-1241 |
Liu, Y., Chen, K., Luo, K., Li, J., Mo, L., and Xu, J. (2011). "Using Mg(OH)2 in peroxide bleaching of wheat straw soda-AQ pulp," BioRes. 6(2), 1230-1241. |
|
6(2)
2011 |
1242-1250 |
Janardhnan, S., and Sain, M. (2011). "Targeted disruption of hydroxyl chemistry and crystallinity in natural fibers for the isolation of cellulose nano-fibers via enzymatic treatment," BioRes. 6(2), 1242-1250. |
|
6(2)
2011 |
1251-1261 |
Guo, S., Liu, Z., Hui, L.-F., Si, C.-L., and Pang, J.-J. (2011). "Application of polyoxometalate in hydrogen peroxide bleaching under acidic conditions," BioRes. 6(2), 1251-1261. |
|
6(2)
2011 |
1262-1272 |
Chen, F., Xu, M., Wang, L., and Li, J. (2011). "Preparation and characterization of organic aerogels from a lignin - resourcinol - formaldehyde copolymer," BioRes. 6(2), 1262-1272. |
|
6(2)
2011 |
1273-1287 |
Iqbal, H. M. N., Asgher, M., and Bhatti, H. N. (2011). "Optimization of physical and nutritional factors for synthesis of lignin degrading enzymes by a novel strain of Trametes vericolor," BioRes. 6(2), 1273-1287. |
|
6(2)
2011 |
1288-1297 |
Bhat, A. H., and Abdul Khalil, H. P. S. (2011). "Exploring 'nano filler' based on oil palm ash in polypropylene composites," BioRes. 6(2), 1288-1297. |
|
6(2)
2011 |
1298-1307 |
Ferrer, A., Rosal, A., Valls, C., Roncero, B., and Rodríguez, A. (2011). "Modeling hydrogen peroxide bleaching of soda pulp from oil-palm empty fruit bunches," BioRes. 6(2), 1298-1307. |
|
6(2)
2011 |
1308-1321 |
Aydemir, D., Gunduz, G., Altuntaş, E., Ertas, M., Şahin, H. T., and Hakki Alma, M. (2011). "Investigating changes in the chemical consitutents and dimensional stability of heat-treated hornbeam and uludag fir wood," BioRes. 6(2), 1308-1321. |
|
6(2)
2011 |
1322-1335 |
Tolba, R.., Wu, G., and Chen, A. (2011). "Adsorption of dietary oils onto lignin for promising pharameutical and nutritional applications," BioRes. 6(2), 1322-1335. |
|
6(2)
2011 |
1336-1350 |
Nyman, K., and Hakala, T. (2011). "Decolorization of inkjet ink and deinking of inkjet-printed paper with laccase-mediator system," BioRes. 6(2), 1336-1350. |
|
6(2)
2011 |
1351-1358 |
Kord, B. (2011). "Nanofiller reinforcement effects on the thermal, dynamic mechanical, and morphological behavior of HDPE/rice husk flour composites," BioRes. 6(2), 1351-1358. |
|
6(2)
2011 |
1359-1375 |
Basta, A. H., Sefain, M. Z., and El-Rewainy, I. (2011). "Role of some treatments on enhancing the eco-friendly utilization of lignocellulosic wastes in production of cement-fiber bricks," BioRes. 6(2), 1359-1375. |
|
6(2)
2011 |
1376-1391 |
Kaur, H., Dutt, D., and Tyagi, C. H. (2011). "Production of novel alkali-thermo-tolerant cellulase-poor xylanases from Coprinopsis cinerea HK-1 NFCCI-2032," BioRes. 6(2), 1376-1391. |
|
6(2)
2011 |
1392-1413 |
Wang, X., Chang, P. R., Li, Z., Wang, H., Liang, H., Cao, X., and Chen, Y. (2011). "Chitosan-coated cellulose/soy protein membranes with improved physical properties and hemocompatibility," BioRes. 6(2), 1392-1413. |
|
6(2)
2011 |
1414-1427 |
Yang, J., Wang, G., Qi, L., and Xu, J. (2011). "Optimizing sulfite pretreatment for saccharification of wheat straw using orthogonal design," BioRes. 6(2), 1414-1427. |
|
6(2)
2011 |
1428-1439 |
Ma, X., Huang, L., Chen, Y., Cao, S., and Chen, L. (2011). "Preparation of bamboo dissolving pulp for textile production. Part 1. Study on prehydrolysis of green bamboo for producing dissolving pulp," BioRes. 6(2), 1428-1439. |
|
6(2)
2011 |
1440-1453 |
Luduena, L., Fasce, D., Alvarez, V. A., and Stefani, P. M. (2011). "Nanocellulose from rice husk following alkaline treatment to remove silica," BioRes. 6(2), 1440-1453. |
|
6(2)
2011 |
1454-1474 |
Lam, Y. L., Kan, C. W., and Yuen, C. W. (2011). "Effect of oxygen plasma pretreatment and titanium dioxide overlay coating on flame retardant finished cotton fabrics," BioRes. 6(2), 1454-1474. |
|
6(2)
2011 |
1475-1483 |
Zabihzadeh, S. M., Omidvar, A., Marandi, M. A. B., Dastoorian, F., and Mirmehdi, S. M. (2011). "Effect of filler loading on physical and flexural properties of rapeseed stem/PP composites," BioRes. 6(2), 1475-1483. |
|
6(2)
2011 |
1484-1494 |
Liang, C., Zhan, H., Li, B., and Fu, S. (2011). "Characterization of bamboo SCMP alkaline extractives and the effects of peroxide bleaching," BioRes. 6(2), 1484-1494. |
|
6(2)
2011 |
1495-1504 |
Dutt, D., Jain, R. K., Maheshwari, A., and Kaur, H. (2011). "Cost reduction studies of decorative laminates," BioRes. 6(2), 1495-1504. |
|
6(2)
2011 |
1505-1519 |
Verma, N., Bansal, M. C., and Kumar, V. (2011). "Pea peel waste: A lignocellulosic waste and its utility in cellulase production by Tricoderma reesei under solid state cultivation," BioRes. 1505-1519. |
|
6(2)
2011 |
1520-1531 |
Akalin, M. K., and Karagöz, S. (2011). "Pyrolysis of tobacco residue: Part 1. Thermal," BioRes. 6(2), 1520-1531. |
|
6(2)
2011 |
1532-1542 |
Li, J., Li, S., Wang, H., Yang, Y., and Guo, G. (2011). "Preparation of a lignin-based composite and its properties," BioRes. 6(2), 1532-1542. |
|
6(2)
2011 |
1543-1555 |
Gunduz, G., Aydemir, D., Onat, S. M., and Akgun, K. (2011). "The effects of tannin and thermal treatment on physical and mechanical properties of laminated chestnut wood composites," BioRes. 6(2), 1543-1555. |
|
6(2)
2011 |
1556-1575 |
Ghosh, M. K., and Ghosh, U. K. (2011). "Utilization of pine needles as bed material in solid state fermentation for production of lactic acid by Lactobacillus strains," BioRes. 6(2), 1556-1575. |
|
6(2)
2011 |
1576-1598 |
Xiao, L.-P., Sun, Z.-J., Shi, Z.-J., Xu, F., and Sun, R.-C. (2011). "Impact of hot compressed water pretreatment on the structural changes of woody biomass for bioethanol production," BioRes. 6(2), 1576-1598. |
|
6(2)
2011 |
1599-1614 |
Gonzalez, R., Jameel, H., Chang, H.-M., Treasure, T., Pirraglia, A., and Saloni, D. (2011). "Thermo-mechanical pulping as a pretreatment for agricultural biomass as biochemical conversion," BioRes. 6(2), 1599-1614. |
|
6(2)
2011 |
1615-1630 |
Wan, J., Yang, J., Ma, Y., and Wang, Y. (2011). "Effects of pulp preparation and papermaking processes on the properties of OCC fibers," BioRes. 6(2), 1615-1630. |
|
6(2)
2011 |
1631-1647 |
Hrabalova, M., Schwanninger, M., Wimmer, R., Gregorova, A., Zimmermann, T., and Mundigler, N. (2011). "Effects on thermal, morphological, and viscoelastic properties of poly(vinylalcohol)/fibre composites," BioRes. 6(2), 1631-1647. |
|
6(2)
2011 |
1648-1658 |
Çakıcıer, N., Korkut, S., and Korkut, D. S. (2011). "Varnish layer hardness, scratch resistance, and glossiness of various wood species as affected by heat treatment," BioRes. 6(2), 1648-1658. |
|
6(2)
2011 |
1659-1669 |
Vilaseca, F., Puig, J., Pèlach, M. À., El Mansouri, N.-E., Alcalà, M., Roux, J.-C., and Mutjé, P. (2011). "Study and modeling of the disintegration kinetics of coated paper," BioRes. 6(2), 1659-1669. |
|
6(2)
2011 |
1670-1680 |
Li, S., Gao, Y., Bai, H., Zhang, L., Qu, P., and Bai, L. (2011). "Preparation and characteristics of polysulfone dialysis composite membranes modified with nanocrystalline cellulose," BioRes. 6(2), 1670-1680. |
|
6(2)
2011 |
1681-1695 |
Li, H., Liu, H., Fu, S., and Zhan, H. (2011). "Surface hydrophobicity modification of cellulose fibers by layer-by-layer self-assembly of lignosulfonates," BioRes. 6(2), 1681-1695. |
|
6(2)
2011 |
1696-1706 |
Shahriarinour, M., Wahab, M. N. A., Mohamad, R., Mustafa, S., and Ariff, A. B. (2011). "Cyanobacterial biomass as N-supplement to oil palm empty fruit bunch (OPEFB) fibre for improvement of cellulase production by Aspergillus terreus in submerged fermentation," BioRes. 6(2), 1696-1706. |
|
6(2)
2011 |
1707-1718 |
Saeed, A., Fatehi, P., Ni, Y., and van Heiningen, A. (2011). "Impact of furfural on the sugar analysis of prehydrolysis liquor of kraft-based dissolving pulp production process using the HPAEC technique," BioRes. 6(2), 1707-1718. |
|
6(2)
2011 |
1719-1740 |
Wanrosli, W. D., Kassim, H. H. M., and Seeni, A. (2011). "Cellulose phosphate from oil palm biomass as potential biomaterials," BioRes. 6(2), 1719-1740. |
|
6(2)
2011 |
1741-1751 |
Kord, B., and Hosseini Kiakojouri, S. M. (2011). "Effect of nanoclay dispersion on physical and mechanical properties of wood flour/ polypropylene/ glass fiber hybrid composites," BioRes. 6(2), 1741-1751. |
|
6(2)
2011 |
1752-1763 |
Bhat, I. H., Mustafa, M. T. B., Mohmod, A. L., and Abdul Khalil, H. P. S. (2011). "Spectroscopic, thermal, and anatomical characterization of cultivated bamboo (Gigantochloa spp.)," BioRes. 6(2), 1752-1763. |
|
6(2)
2011 |
1764-1772 |
Dai, Z., Court, G., Li, Z., and Ni, Y. (2011). "Effect of polymers and metal ions on the behavior of pitch from a spruce TMP-based specialty paper mill based on DSC and confocal LSM analysis," BioRes. 6(2), 1764-1772. |
|
6(2)
2011 |
1773-1805 |
Akalın, M. K., and Karagöz, S. (2011). "Pyrolysis of tobacco residue. Part 2: Catalytic," BioRes. 6(2), 1773-1805. |
|
6(2)
2011 |
1806-1815 |
Jové, P., Olivella, M. À., and Cano, L. (2011). "Study of the variability in chemical composition of bark layers of Quercus suber L. from different production areas," BioRes. 6(2), 1806-1815. |
|
6(2)
2011 |
1816-1829 |
Belini, U. L., Hein, P. R. G., Filho, M. T., Rodrigues, J. C., and Chaix, G. (2011). "Near infrared spectroscopy for estimating sugarcane bagasse content in medium density fiberboard," BioRes. 6(2), 1816-1829. |
|
6(2)
2011 |
1830-1842 |
Sánchez, C., Egüés, I., Llano-Ponte, R., and Labidi, J. (2011). "Acid- and base-catalized hydrolysis of corn stalk," BioRes. 6(2), 1830-1842. |
|
6(2)
2011 |
1843-1857 |
Hosseini Hashemi, S. K., and Kord, B. (2011). "Variation of within-stem biometrical and physical property indices of wood from Cupressus sempervirons L.," BioRes. 6(2), 1843-1857. |
|
6(2)
2011 |
1858-1867 |
Wang, Z., Lin, W., and Song, W. (2011). "Mechanistic study of the conversion from DMDFC to DOHE in the levulinic acid formation process by theoretical approaches," BioRes. 6(2), 1858-1867. |
|
6(2)
2011 |
1868-1879 |
Wang, Q., Chen, K., Li, J., Xu, J., and Liu, S. (2011). "Simultaneous determination of chlorine dioxide and hypochlorous acid in bleaching system," BioRes. 6(2), 1868-1879. |
|
6(2)
2011 |
1880-1889 |
Ding, T., Gu, L., and Liu, X. (2011). "Influence of steam pressure on chemical changes of heat-treated Mongolian pine wood," BioRes. 6(2), 1880-1889. |
|
6(2)
2011 |
1890-1903 |
Borrega, M., Nieminen, K., and Sixta, H. (2011). "Effects of hot water extraction in a batch reactor on the delignification of birch wood," BioRes. 6(2), 1890-1903. |
|
6(2)
2011 |
1904-1915 |
Ben Marzoug, I. B., Allègue, L., Sakli, F., and Roudesli, S. (2011). "Acid, acrylamide and zeolite modification of cellulosic esparto fibers for dyes decolourisation," BioRes. 6(2), 1904-1915. |
|
6(2)
2011 |
1916-1925 |
Gao, Y., Qin, M., Li, C., Yu, H., and Zhang, F. (2011). "Control of sticky contaminants with cationic talc in deinked pulp," BioRes. 6(2), 1916-1925. |
|
6(2)
2011 |
1926-1938 |
Wang, X.-Q., and Zhou, X.-F. (2011). "Novel starch solution prepared from the starch and NaOH/ thiourea/ urea aqueous solution and its application as surface sizing agent," BioRes. 6(2), 1926-1938. |
|
6(2)
2011 |
1939-1953 |
Han, M., Choi, G.-W., Kim, Y., and Koo, B.-C. (2011). "Bioethanol production by Miscanthus as a lignocellulosic biomass: Focus on high efficiency conversion to glucose and ethanol," BioRes. 6(2), 1939-1953. |
|
6(2)
2011 |
1954-1971 |
Karaoğlu, M. H., Uğurlu, M., and Kula, İ. (2011). "Adsorption characterization of Co(II) ions onto chemically treated Quercus coccifera shell: Equilibrium, kinetic, and thermodynamic studies," BioRes. 6(2), 1954-1971. |
|
6(2)
2011 |
1972-1987 |
Li, G., and Liu, W. (2011). "Adsorption of pitch and stickies on magnesium aluminum hydroxides treated at different temperatures," BioRes. 6(2), 1972-1987. |
|
6(2)
2011 |
1988-2003 |
Mohkami, M., and Talaeipour, M. (2011). "Investigation of the chemical structure of carboxylated and carboxymethylated fibers from waste paper via XRD and FTIR analysis," BioRes. 6(2), 1988-2003. |
|
6(2)
2011 |
2004-2021 |
Zambare, V. P., Zambare, A. V., Muthukumarappan, K., and Christopher, L. P. (2011). "Potential of thermostable cellulases in the bioprocessing of switchgrass to ethanol," BioRes. 6(2), 2004-2021. |
|
6(2)
2011 |
2022-2034 |
Yue, X., Chen, F., and Zhou, X. (2011). "Improved interfacial bonding of PVC/wood-flour composites by lignin amine modification," BioRes. 6(2), 2022-2034. |
|
6(2)
2011 |
2035-2044 |
Wang, L., and Liu, H. (2011). "Electroless nickel plating on chitosan-modified wood veneer," BioRes. 6(2), 2035-2044. |
|
6(2)
2011 |
2045-2054 |
Köse, C., Terzi, E., Büyüksarı, Ü, Avci, E., Ayrılmış, N., Kartal, S. N., and Imamura, Y. (2011). "Particleboard and MDF panels made from a mixture of wood and pinecones: Resistance to decay fungi and termites under laboratory conditions," BioRes. 6(2), 2045-2054. |
|
6(2)
2011 |
2055-2065 |
Roohnia, M., Hashemi-dizaji, S.-F., Brancheriau, L., Tajdini, A., Hemmasi, A.-H., and Manouchehri, N. (2011). "Effect of soaking process in water on the acoustical quality of wood for traditional musical instruments," BioRes. 6(2), 2055-2065. |
|
6(2)
2011 |
2066-2076 |
Khisti, U., Bastawde, K. B., and Gokhale, D. V. (2011). "Hyper-production of beta-glucosidase and beta-xylosidase by Aspergillus niger NCIM 1207 in xylan-containing media," BioRes. 6(2), 2066-2076. |
|
6(2)
2011 |
2077-2090 |
Area, M. C., Felissia, F. E., Carvalho, M. G. V. S., Ferreira, P. J., Barboza, O. M., and Bengoechea, D. I. (2011). "Caracterization of Eucalyptus grandis kraft pulps treated with phosphontates in different stages of TCF bleaching," BioRes. 6(2), 2077-2090. |
|
6(2)
2011 |
2091-2100 |
Sun, F., Zhou, Y, Bao, B., Chen., A., and Du, C. (2011). "Influence of solvent treatment on mould resistance of bamboo," BioRes. 6(2), 2091-2100. |
|
6(2)
2011 |
2101-2117 |
Singha, A. S., Kaith, B. S., and Khanna, A. J. (2011). "Synthesis and characterization of Cannabis indica fiber reinforced composites," BioRes. 6(2), 2101-2117. |
|
6(2)
2011 |
2118-2124 |
Gündüz, G., Yapıcı, F., Özçifçi, A., and Kalaycıoğlu, H. (2011). "The effects of adhesive ratio and pressure time on some properties of oriented strand board," BioRes. 6(2), 2118-2124. |
|
6(2)
2011 |
2125-2134 |
Horvath, B., Peralta, P., Frazier, C., and Peszlen, I. (2011). "Thermal softening of transgenic aspen," BioRes. 6(2), 2125-2134. |
|
6(2)
2011 |
2135-2144 |
de Palacios, P., Esteban, L. G., García Fernández, F., García-Iruela, A., González-Adrados, J. R., and Conde, M. (2011). "Comparative study of the 35 oC sorption Isotherms of cork stripped from the tree in 1968 and 2006," BioRes. 6(2), 2135-2144. |
|
6(2)
2011 |
2145-2160 |
Kiuru, J., Sievänen, J., Tsitko, I., Pajari, H., and Tukiainen, P. (2011). "A new dual biocide concept for fine papermaking," BioRes. 6(3), 2145-2160. |
|
6(3)
2011 |
2291-2308 |
Hemmasi, A. H., Khademi-Eslam, H., Pourabbasi, S., Ghasemi, I., and Talaiepour, M. (2011). "Cell morphology and physico-mechanical properties of HDPE/EVA/rice hull hybrid foamed composites," BioRes. 6(3), 2291-2308. |
|
6(3)
2011 |
2309-2322 |
Jawaid, M., and Abdul Khalil, H. P. S. (2011). "Effect of layering pattern on the dynamic mechanical properties and thermal degradation of oil palm-jute fibers reinforced epoxy hybrid composite," BioRes. 6(3), 2309-2322. |
|
6(3)
2011 |
2323-2339 |
Xie, Y., Hill, C. A. S., Sun, D., Jalaludin, Z., Wang, Q., and Mai, C. (2011). "Effects of dynamic aging (hydrolysis and condensation) behaviour of organofunctional silanes in the aqeous solution on their penetrability into the cells walls of wood," BioRes. 6(3), 2323-2339. |
|
6(3)
2011 |
2340-2355 |
Orblin, E., and Fardim, P. (2011). "Interactions between cationic polyelectrolyte and pulp fines," BioRes. 6(3), 2340-2355. |
|
6(3)
2011 |
2356-2365 |
Nenkova, S., Velev, P., Dragnevska, M., Nikolova, D., and Dimitrov, K. (2011). "Lignocellulose nanocomposite containing copper sulfide," BioRes. 6(3), 2356-2365. |
|
6(3)
2011 |
2366-2374 |
Wang, Q., Chen, K., Liu, S., Li, J., and Xu, J. (2011). "Kinetics of bagasse delignification by using high-boiling solvent," BioRes. 6(3), 2366-2374. |
|
6(3)
2011 |
2375-2385 |
Li, W., Wu, L., Di, C., Liu, C., and Sun, R. (2011). "DMAP-catalyzed phthalylation of cellulose with with phthalic anhydride in [bmim]Cl," BioRes. 6(3), 2375-2385. |
|
6(3)
2011 |
2386-2398 |
Tammelin, T., Harlin, A., Vehviläinen, M., Nousiainen, P., and Kolppo, K. (2011). "Method to prepare smooth and even cellulose-lignophenol films," BioRes. 6(3), 2386-2398. |
|
6(3)
2011 |
2399-2410 |
Chen, H., Chen, K., Yang, R., Yang, F., and Gao, W. (2011). "Use of aluminum trihydrate filler to improve the strength properties of cellulosic paper exposed to high temperature treatment," BioRes. 6(3), 2399-2410. |
|
6(3)
2011 |
2411-2424 |
Najafi, A., and Khademi-Eslam, H. (2011). "Lignocellulosic filler/recycled HDPI composites: Effect of filler type of physical and flexural properties," BioRes. 6(3), 2411-2424. |
|
6(3)
2011 |
2425-2434 |
Wang, Y., Lindström, M. E., and Henriksson, G. (2011). "Mild alkaline treatment activates spruce wood for enzymatic processing: A possible stage in biorefinery processes," BioRes. 6(3), 2425-2434. |
|
6(3)
2011 |
2435-2447 |
Chen, X., Qian, X., and An, X. (2011). "Using calcium carbonate whiskers as papermaking filler," BioRes. 6(3), 2435-2447. |
|
6(3)
2011 |
2448-2459 |
Sanchez, R. A., and Espósito, B. P. (2011). "Preparation of sugarcane bagasse modified with the thiophosphoryl function and its capacity for cadmium adsorption," BioRes. 6(2), 2448-2459. |
|
6(3)
2011 |
2460-2470 |
Xu, X., Shang, S., Song, Z., Cui, S., Wang, H., and Wang, D. (2011). "Preparation and characterization of rosin-based waterborne polyurethane from maleopimaric acid polyester polyol," BioRes. 6(3), 2460-2470. |
|
6(3)
2011 |
2471-2482 |
Pereira, P. H. F., Voorwald, H. C. J., Cioffi, M. O. H., Mulinari, D. R., Da Luz, S. M., and Da Silva, M. L. C. P. (2011). "Sugarcane bagasse pulping and bleaching: Thermal and chemical characterization," BioRes. 6(3), 2471-2482. |
|
6(3)
2011 |
2483-2491 |
Jafari-Petroudy, S. R., Resalati, H., and Rezayati-Charani, P. (2011). "Newsprint from soda bagasse pulp in admixture with hardwood CMP pulp," BioRes. 6(3), 2483-2491. |
|
6(3)
2011 |
2492-2503 |
El Mansouri, N.-E., Yuan, Q., and Huang, F. (2011). "Synthesis and characterization of kraft lignin-based epoxy resins," BioRes. 6(3), 2492-2503. |
|
6(3)
2011 |
2504-2521 |
Yildiz, S., Yildiz, U. C., and Tomak, E. D. (2011). "The effects of natural weathering on the properties of heat-treated alder wood," BioRes. 6(3), 2504-2521. |
|
6(3)
2011 |
2522-2538 |
Saleem, N., and Bhatti, H. N. (2011). "Adsorptive removal and recovery of U(VI) by citrus waste biomass," BioRes. 6(3), 2522-2538. |
|
6(3)
2011 |
2539-2550 |
Guo, Z., Wang, S., Xu, G., and Cai, G. (2011). "Upgrading of bio-oil molecular distillation fraction with solid acid catalyst," BioRes. 6(3), 2539-2550. |
|
6(3)
2011 |
2551-2567 |
Gonzalez, R., Treasure, T., Phillips, R., Jameel, H., and Saloni, D. (2011). "Economics of cellulosic ethanol production: Green liquor pretreatment for softwood and hardwood, greenfield and repurpose scenarios," BioRes. 6(3), 2551-2567. |
|
6(3)
2011 |
2568-2580 |
Yang, G., Lucia, L. A., Chen, J., Cao, X., and Liu, Y. (2011). "Effects of enzyme pretreatment on the beatability of fast-growing poplar APMP pulp," BioRes. 6(3), 2568-2580. |
|
6(3)
2011 |
2581-2591 |
Javed, M. A., and Germgård, U. (2011). "The reactivity of prehydrolyzed softwood kraft pulps after prolonged cooking followed by chlorite delignification," BioRes. 6(3), 2581-2591. |
|
6(3)
2011 |
2592-2604 |
Liu, H.-M., Xie, X.-A., Feng, B., and Sun, R.-C. (2011). "Effect of catalysts on 5-lump distribution of constalk liquefaction in sub-critical ethanol," BioRes. 6(3), 2592-2604. |
|
6(3)
2011 |
2605-2618 |
Cui, L., Li, L., Zhang, A., Pan, G., Bao, D., and Chang, A. (2011). "Biochar amendment greatly reduces rice Cd uptake in a contaminated paddy soil: A two-year field experiment," BioRes. 6(3), 2605-2618. |
|
6(3)
2011 |
2619-2631 |
Dai, L., Dai, H., Yuan, Y., Sun, X., and Zhu, Z. (2011). "Effects of TEMPO oxidation system on kinetic constants of cotton fibers," BioRes. 6(3), 2619-2631. |
|
6(3)
2011 |
2632-2646 |
Abdolahian Sohi, A. M., Khademi-Eslam, H., Hemmasi, A. H., Roohnia, M., and Talaiepour, M. (2011). "Nondestructive detection of the effect of drilling on acoustic performance of wood," BioRes. 6(3), 2632-2646. |
|
6(3)
2011 |
2647-2662 |
El Mansouri, N.-E., Yuan, Q., and Huang, F. (2011). "Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins," BioRes. 6(3), 2647-2662. |
|
6(3)
2011 |
2663-2675 |
Shahriarinour, M., Ramanan, R. N., Abdul Wahab, M. N., Mohamad, R., Mustafa, S., and Ariff, A. B. (2011). "Improved cellulase production by Aspergillus terreus using oil palm empty fruit bunch fiber as substrate in a stirred tank bioreactor through optimization of the fermentation conditions," Biores. 6(3), 2663-2675. |
|
6(3)
2011 |
2676-2689 |
Espinoza, O., Buehlmann, U., Bumgardner, M., and Smith, B. (2011). "Assessing changes in the U.S. hardwood sawmill industry with a focus on markets and distribution," BioRes. 6(3), 2676-2689. |
|
6(3)
2011 |
2690-2702 |
Li, Y, and He, B. (2011). "Characterization of ink pigment penetration and distribution related to surface topography of paper using confocal laser scanning microscopy," BioRes. 6(3), 2690-2702. |
|
6(3)
2011 |
2703-2710 |
Rivilli, P. L., Yranzo, G. I., and Pérez, J. D. (2011). "Stepwise isothermal fast pyrolysis (SIFP) of biomass. Part 1. SIFP of pine sawdust," BioRes.6(3), 2703-2710. |
|
6(3)
2011 |
2711-2718 |
Ghafarzade Mollabashi, O., Saraeian, A. R., and Resalati, H. (2011). "The effect of surfactants application on soda pulping of wheat straw," BioRes. 6(3), 2711-2718. |
|
6(3)
2011 |
2719-2731 |
Teoh, Y. P., Don, M. M., and Ujang, S. (2011). "Media selection for mycelia growth, antifungal activity against wood-degrading fungi, and GC-MS study by Pycnoporus sanguineus," BioRes. 6(3), 2719-2731. |
|
6(3)
2011 |
2732-2743 |
Singh, J., Mishra, N. S., Uma, Banerjee, S., and Sharma, Y. C. (2011). "Comparative studies of physical characteristics of raw and modified sawdust for their use as adsorbents for removal of acid dye," BioRes. 6(3), 2732-2743. |
|
6(3)
2011 |
2744-2756 |
Lin, Y.-S., and Lee, W.-C. (2011). "Simultaneous saccharification and fermentation of alkali-pretreated cogongrass for bioethanon production," BioRes. 6(3), 2744-2756. |
|
6(3)
2011 |
2757-2762 |
Yapici, F., Ozcifci, A., Esen, R., and Kurt, S. (2011). "The effect of grain angle and species on thermal conductivity of some selected wood species," BioRes. 6(3), 2757-2762. |
|
6(3)
2011 |
2763-2775 |
Saloni, D. E., Lemaster, R., and Jackson, S. (2011). "Control system evaluation and implementation for the abrasive machining process on wood," BioRes. 6(3), 2763-2775. |
|
6(3)
2011 |
2776-2789 |
Feng,Y., Liu, H.-Q., Sun, R.-C., and Jiang, J.-X. (2011). "Enzymatic hydrolysis of cellulose from steam-pretreated Lespedeza stalk (Lespedeza crytobotrya) with four Trichoderma cellulases," BioRes 6(3), 2776-2789. |
|
6(3)
2011 |
2790-2804 |
Yuan, G., Dai, H., Ye, C., Zhang, Y., and Wang, Z. (2011). "Adsorption of Ca(II) from aqueous solution onto cellulosic fibers and its impact on the papermaking process," BioRes. 6(3), 2790-2804. |
|
6(3)
2011 |
2805-2817 |
Kılıç, M. (2011). "The effects of the force loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL)," BioRes. 6(3), 2805-2817. |
|
6(3)
2011 |
2818-2835 |
Ioeovich, M., and Morag, E. (2011). "Effect of cellulose structure on enzymatic hydrolysis," BioRes. 6(3), 2818-2835. |
|
6(3)
2011 |
2836-2850 |
Kuutti, L., Haavisto, S., Hyvärinen, S., Mikkonen, H., Koski, R., Peltonen, S., Suortti, T., and Kyllönen, H. (2011). "Properties and flocculation efficiency of cationized biopolymers and their applicability in papermaking and in conditioning of pulp and paper sludge," BioRes. 6(3), 2836-2850. |
|
6(3)
2011 |
2851-2860 |
Mancera, C., El Mansouri, N-E., Vilaseca, F., Ferrando, F., and Salvado, J. (2011). "The effect of lignin as a natural adhesive on the physico-mechanical properties of Vitis vinifera fiberboards," BioRes. 6(3), 2851-2860. |
|
6(3)
2011 |
2861-2873 |
Irshad, M., Asgher, M., Scheikh, M. A., and Nawaz, H. (2011). "Purification and characterization of laccase produced by Schyzophylum commune IBL-06 in solid state culture of banana stalks," BioRes. 6(3), 2861-2873. |
|
6(3)
2011 |
2874-2884 |
Fang, R., Cheng, X.-S., and Lin, W.-S. (2011). "Preparation and application of dimer acid/lignin graft copolymer," BioRes. 6(3), 2874-2884. |
|
6(3)
2011 |
2885-2895 |
Ćilerdžić, J., Stajić, M., Vukojević, J., Duletić-Laušević, S., and Knežević, A. (2011). "Potential of Trametes hirsuta to produce ligninolytic enzymes during degradation of agricultural residues," BioRes. 6(3), 2885-2895. |
|
6(3)
2011 |
2896-2911 |
Cao, X.-F., Yuan, T., Sun, S., and Sun, R.-C. (2011). "Isolation and characterization of soluble polysaccharides from Calamagrostis angustifolia Kom," BioRes. 6(3), 2896-2911. |
|
6(3)
2011 |
2912-2931 |
Pánek, M., and Reinprecht, L. (2011). "Bacillus subtilis for improving spruce wood impregnability," BioRes. 6(3), 2912-2931. |
|
6(3)
2011 |
2932-2940 |
Khanam, Z., Adam, F., Singh, O., and Ahmad, J. (2011). "A novel acylated flavonoidic glycoside from the wood of cultivated Acacia nilotica (L.) Willd. Ex. Delile.," BioRes. 6(3), 2932-2940. |
|
6(3)
2011 |
2941-2953 |
Xin, T.-T., Yuan, T., Xiao, S., and He, J. (2011). "Synthesis of cellulose-graft-poly(methyl methacrylate) via homogeneous ATRP," BioRes. 6(3), 2941-2953. |
|
6(3)
2011 |
2954-2976 |
Gonzalez, R., Phillips, R., Saloni, D., Jameel, H., Abt, R., Pirraglia, A., and Wright, J. (2011). "Biomass to energy in the southern United States: Supply chain and delivered cost," BioRes. 6(3), 2954-2976. |
|
6(3)
2011 |
2977-2989 |
Kemppainen, K., Körkkö, M., and Niinimäki, J. (2011). "Fractional pulping of toner and pigment-based injet ink printed papers - Ink and dirt behavior," BioRes. 6(3), 2977-2989. |
|
6(3)
2011 |
2990-3003 |
Xu, J., Wang, Z., Sharma-Shivappa, R. R., and Cheng, J. J. (2011). "Enzymatic hydrolysis of switchgrass and coastal Bermuda grass pretreated using different chemical methods," BioRes. 6(3), 2990-3003. |
|
6(3)
2011 |
3004-3018 |
Kowaluk, G., Fuczek, D., Beer, P., and Grzeskiewicz, M. (2011). "Influence of the raw materials and production parameters on chosen standard properties for furniture panels of biocomposites from fibrous chips," BioRes. 6(3), 3004-3018. |
|
6(3)
2011 |
3019-3033 |
Danish, M., Hashim, R., Ibrahim, M. N. M., Rafatullah, M., Ahmad, T., and Sulaiman, O. (2011). "Characterization of Acacia mangium wood based activated carbons prepared in the presence of basic activating agents," BioRes. 6(3), 3019-3033. |
|
6(3)
2011 |
3034-3043 |
Wang, Q., Chen, K., Li, J., Yang, G., Liu, S., and Xu, J. (2011). "The solubility of lignin from bagasse in a 1,4-butanediol/water system," BioRes. 6(3), 3034-3043. |
|
6(3)
2011 |
3044-3054 |
Zhang, Y., Cao, C.-Y., Feng, W.-Y., Xue, G.-X., and Xu, M. (2011). "Performance of a pilot-scale membrane process for the concentration of effluent from alkaline peroxide mechanical pulping plants," BioRes. 6(3), 3044-3054. |
|
6(3)
2011 |
3055-3065 |
Kord, B. (2011). "Evaluation on the effect of wood flour and coupling agent content on the hygroscopic thickness swelling rate of polypropylene composites," BioRes. 6(3), 3055-3065. |
|
6(3)
2011 |
3066-3079 |
Xi, E.-H., and Zhao, G.-J. (2011). "Research on differentiated xylem cells based on fractal dimension," BioRes. 6(3), 3066-3079. |
|
6(3)
2011 |
3080-3086 |
Mirski, R., and Dziurka, D. (2011). "Applicability of strand subsitution in the core of OSB," BioRes. 6(3), 3080-3086. |
|
6(3)
2011 |
3087-3095 |
Wang, Y., Chen, K., Mo, L., and Hu, H. (2011). "A cationic polyacrylamide dispersion synthesis by dispersion polymerization in aqueous solution," BioRes. 6(3), 3087-3095. |
|
6(3)
2011 |
3096-3114 |
Gullón, P., Salazar, N., González Muñoz, M. J., Gueimonde, M., Ruas-Madiedo, P., de los Reyes-Gavilán, C. G., and Parajó, J. C. (2011). "Assessment on the fermentability of xylooligosaccharides from rice husks," Biores. 6(3), 3096-3114. |
|
6(3)
2011 |
3115-3131 |
Chaochanchaikul, K., Rosarpitak, V., and Sombatsompop, N. (2011). "Structural and thermal stabilizations of PVC and wood/PVC composites by metal stearates and organotin," BioRes. 6(3), 3115-3131. |
|
6(3)
2011 |
3132-3141 |
Morrison, D., van Dyk, J. S., and Pletschke, B. I. (2011). "The effect of alcohols, lignin and phenolic compounds on the enzyme activity of Clostridium cellulovorans XynA," BioRes. 6(3), 3132-3141. |
|
6(3)
2011 |
3142-3154 |
Ravindran, C., Varatharajan, G. R., and Karthikeyan, A. (2011). "Role of alkaline-tolerant fungal cellulases in release of total antioxidants from agro-wastes under solid state fermentation," BioRes. 6(3), 3142-3154. |
|
6(3)
2011 |
3155-3165 |
Acharya, S. K., Mishra, P., and Mehar, S. K. (2011). "Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite," BioRes. 6(3), 3155-3165. |
|
6(3)
2011 |
3166-3177 |
Sönmez, A., Budakçı, M., and Pelit, H. (2011). "The effect of the moisture content of wood on the layer performance of water-borne varnishes," BioRes. 6(3), 3166-3177.
|
|
6(3)
2011 |
3178-3187 |
Ayrilmis, N. (2011). "Effect of fire retardants on surface roughness and wettability of wood plastic composite panels," BioRes. 6(3), 3178-3187. |
|
6(3)
2011 |
3188-3198 |
Cheng, F., and Hu, Y. (2011). "Reliability analysis of timber structure design of poplar lumber with nondestructive testing methods," BioRes. 6(3), 3188-3198. |
|
6(3)
2011 |
3199-3209 |
Tajdini, A., Tavakkoli, A., Jahan Latibari, A., Roohnia, M., and Tayeb, S. A. H. M. (2011). "Application of simultaneous equations model to estimate particleboard demand and supply," BioRes. 6(3), 3199-3209. |
|
6(3)
2011 |
3210-3230 |
Huang, H.-J., and Ramaswamy, S. (2011). "Thermodynamic analysis of black liquor steam gasification," BioRes. 6(3), 3210-3230. |
|
6(3)
2011 |
3231-3241 |
Eugenio, M. E., Hernández, M., Moya, R., Martín-Sampedro, R., Villar, J. C., and Arias, M. E. (2011). "Evaluation of a new laccase produced by Streptomyces ipomoea on biobleaching and ageing of kraft pulps," BioRes. 6(3), 3231-3241. |
|
6(3)
2011 |
3242-3251 |
Klasson, K. T., Uchimiya, M., Lima, I. M., and Boihem, Jr., L. L. (2011). "Feasibility of removing furfurals from sugar solutions using activated biochars made from agricultural residues," BioRes. 6(3), 3242-3251. |
|
6(3)
2011 |
3252-3259 |
Guo, H., Ma, A., Zhao, G., Yun, J., Liu, X., Zhang, H., and Zhuang, G. (2011). "Effects of farnesol on Penicillium decumbens's morphology and cellulase production," BioRes. 6(3), 3252-3259. |
|
6(3)
2011 |
3260-3271 |
Viet Cao, X., Ismail, H., Rashid, A. A., Takeichi, T., and Vo-Huu, T. (2011). "Mechanical properties and water absorption of kenaf powder filled recycled high density polyethylene/natural rubber biocomposites using MAPE as a compatibilizer," BioRes. 6(3), 3260-3271. |
|
6(3)
2011 |
3272-3288 |
Kilulya, K. F., Msagati, T. A. M., Mamba, B. B., Ngila, J. C., and Bush, T. (2011). "Imidazolium ionic liquids as dissolving solvents for chemical-grade cellulose in the determination of fatty acids using gas chromatography-mass spectrometry," BioRes. 6(3), 3272-3288. |
|
6(3)
2011 |
3289-3299 |
Hosseinihashemi, S. K., Modirzare, M., Safdari, V., and Kord, B. (2011). "Decay resistance, hardness, water absorption, and thickness swelling of a bagasse fiber/plastic composite," BioRes. 6(3), 3289-3299. |
|
6(3)
2011 |
3300-3312 |
Chen, X., Shen, W., Kou, S., and Liu, H. (2010). "GC-MS study of the removal of dissolved and colloidal substances in recycled papermaking by flocculation with nano-size TiO2 Colloids," BioRes. 6(3), 3300-3312. |
|
6(3)
2011 |
3313-3323 |
Samariha, A., and Khakifirooz, A. (2011). "Application of NSSC pulping to sugarcane bagasse," BioRes. 6(3), 3313-3323. |
|
6(3)
2011 |
3324-3338 |
Mahajan, G., and Sud, D. (2011). "Kinetics and equilibrium studies of Cr(VI) metal ion remediation by Arachis hypogea shells: A green approach," BioRes. 6(3), 3324-3338. |
PDF |
6(3)
2011 |
3339-3351 |
Wang, W., Zhao, Z., Gao, Z., and Guo, M. (2011). "Whey protein-based water-resistant and environmentally safe adhesives for plywood," BioRes. 6(3), 3339-3351. |
PDF |
6(3)
2011 |
3352-3362 |
Hein, P. R. G., and Brancheriau, L. (2011). "Radial variation of microfibril angle and wood density and their relationships in 14-year-old Eucalyptus urophylla S. t. Blake wood," BioRes. 6(3), 3352-3362. |
PDF |
6(3)
2011 |
3363-3375 |
Olivella, M. À., Jové, P., Şen, A., Pereira, H., Villaescusa, I., and Fiol, N. (2011). "Sorption performance of Quercus cerris cork with polycyclic aromatic hydrocarbons and toxicity testing," BioRes. 6(3) 3363-3375. |
PDF |
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
Researchers interested in submitting research articles need to be aware that BioResources employs a rigorous system of peer-reviewing. To be accepted, articles must be relevant to the scope of the journal, well written, containing new information, and providing new, useful insights. The context of the work, relative to other published research, must be adequately described, with sufficient literature citations. The work must have not appeared elsewhere, with the exception of minor parts of an authors previous work, with suitable citations. Figures must be original, with the exception of figures from the authors' own work, in cases where suitable permissions have been obtained. Such permissions are the responsibility of the author(s). More information is available at the "Author Instructions" link in the navigation area at left.
|
