BioResources: Peer-reviewed online journal for lignocellulosic science

BioResources
(http://ncsu.edu/bioresources; ISSN: 1930-2126)

A Peer-Reviewed Online Journal Devoted to the Science and Engineering of Biomass from Lignocellulosic Sources for New End Uses and New Capabilities

Features of issue no. 3(3), Aug. 2008:
(currently in the process of building)

Cheng, S., and Zhu, S. (2008). "Use of lignocellulosic materials for a sustainable chemical industry," BioRes. 3(3), 666-667.	PDF
Lucia, L. A., and Hubbe, M. A. (2008). *"Book review: 'Materials, chemicals & energy from forest biomass'* ,"** BioRes. 3(3), 668-669.	PDF
Martín, C., Marcet, M., and Thomsen, A. B. (2008). "Comparison between wet oxidation and steam explosion as pretreatment methods for enyzmatic hydrolysis of sugarcane bagasse," BioRes. 3(3), 670-683.	PDF
Porankiewicz, B., and Wieloch, G. (2008). *"Sanding of Fagus silvatica L.* wood perpendicularly to the grains,"** BioRes. 3(3), 684-700.	PDF

Features of issue no. 3(2), May 2008:

Hubbe, M. A. (2008). "Are lignocellulosic resources too valuable to burn?" BioRes. 3(2), 295-296.	PDF
Sun, Y., Lin, L., Deng, H., Li, J., He, B., Sun, R., and Ouyang, P. (2008). "Structural changes of bamboo cellulose in formic acid," BioRes. 3(2), 297-315.	PDF
Quintero, O. L., Amicarelli, A. A., di Sciascio, F., and Scaglia, G. (2008). *"State estimation in alcoholic continuous fermentation of Zymomonas mobilus* using recursive Bayesian filtering: A simulation approach,"** BioRes. 3(2), 316-334.	PDF
Giese, E. C., Dekker, R. F. H., and Barbosa, A. M. (2008). *"Orange bagasse as substrate for the production of pectinase and laccase by Botryosphaeria rhodina* MAMB-05 in submerged and solid state fermentation,"** BioRes. 3(2), 335-345.	PDF
Deka, M., and Petrič, M. (2008). "Photo-degradation of water borne acrylic coated modified and non-modified wood during artificial light exposure," BioRes. 3(2), 346-362.	PDF
Xu, C., Su, H., and Cang, D. (2008). "Liquefaction of corn distillers dried grains with solubles (DDGS) in hot-compressed phenol," BioRes. 3(2), 363-382.	PDF
Ekhtera, M. H., Rezayati Charani, P., Ramezani, O., and Azadfallah, M. (2008). "Effects of poly-aluminum chloride, starch, alum, and rosin on the rosin sizing, strength, and microscopic appearance of paper prepared from old corrugated container (OCC) pulp," BioRes. 3(2), 383-402.	PDF
El-Sharkawy, K., Haavisto, S., Koskenkely, K., and Paulapuro, H. (2008). "Effect of fiber flocculation and filling design on refiner loadability and refining characteristics," BioRes. 3(2), 403-424.	PDF
Porankiewicz, B., and Wieloch, G. (2008). "Drill wear during the boring of particle board: A multi-factor analysis including effects of mineral contaminants," BioRes. 3(2), 425-436.	PDF
Brännström, M., Manninen, J., and Oja, J. (2008). "Predicting the strength of sawn wood by tracheid laser scattering," BioRes. 3(2), 437-451.	PDF
Dawson, L., and Boopathy, R. (2008). "Cellulosic ethanol production from sugarcane bagassed without enzymatic saccharification," BioRes. 3(2), 452-460.	PDF
Ni, W., Chen, J., and Xu, Q. (2008). "Synthesis and characterization of hierarchically porous silica with poplar tissue as template with assistance of supercritical CO2," BioRes. 3(2), 461-476.	PDF
Ander, P., Hildén, L., and Daniel, G. (2008). "Cleavage of softwood kraft pulp fibers by HCl and cellulases," BioRes. 3(2), 477-490.	PDF
Peters, J., Fischer, K., and Fischer, S. (2008). "Characterization of emissions from thermally modified wood and their reduction by chemical treatment," BioRes. 3(2), 491-502.	PDF
Singh, S. P. (2008). "A comparison of different methods of paper surface smoothness evaluation," BioRes. 3(2), 503-516.	PDF
Kocaefe, D., Poncsak, S., and Boluk, Y. (2008). "Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen," BioRes. 3(2), 517-537.	PDF
Nada, A. M. A., Kassem, N. F., and Mohamed, S. H. (2008). "Characterization and properties of ion exchangers produced from lignin precipitated after peroxyacid pulping," BioRes. 3(2), 538-548.	PDF
Mattinen, M.-L., Suortti, T., Gosselink, R., Argyropoulos, D. S., Evtuguin, D., Suurnäkki, A., de Jong, E., and Tamminen, T. (2008). "Polymerization of different lignins by laccase," BioRes. 3(2), 549-565.	PDF
Khambalkar, V. P., Karale, D. S., Gadge, S. R., and Dahatonde, S. B. (2008). "Assessment of bioenergy potential of a rural village for self energy generation," BioRes. 3(2), 566-575.	PDF
Liebert, T., and Heinze, T. (2008). "Interactions of ionic liquids with polysaccharides. 5. Solvents and reaction media for the modification of cellulose," BioRes. 3(2), 576-601.	PDF
Frybort, S. Mauritz, R., Teischinger, A., and Müller, U. (2008). "Cement bonded composites - A mechanical review," BioRes. 3(2), 602-626.	PDF
Hubbe, M. A., Pawlak, J. J., and Koukoulas, A. A. (2008). "Paper's appearance: A review," BioRes. 3(2), 627-665.	PDF

Features of issue no. 3(1), February 2008:

Pawlak, J. J. (2008). "A sustainable economy," BioRes. 3(1), 1-2.	PDF
Wang, H., Li, B., and Shi, B. (2008). "Preparation and surface acid-base properties of porous cellulose," BioRes. 3(1), 3-12.	PDF
Malutan, T., Nicu, R., and Popa, V. I. (2008). "Contribution to the study of hydroxymethylation reaction of alkali lignin," BioRes. 3(1), 13-20.	PDF
Zoia, L., Canevali, C., Orlandi, M., Tolppa, E.-L., Sipila, J., and Morazzoni, F., "Radical formation on TMP fibers and related lignin chemical changes," BioRes. 3(1), 21-33.	PDF
Kontturi, E., Mitikka-Eklund, M., and Vuorinen, T. (2008). "Strength enhancement of a fiber network by carboxymethyl cellulose during oxygen delignification of kraft pulp," BioRes. 3(1), 34-45.	PDF
Nada, A.-A. M. A., Alkady, M. Y., and Fekry, H. M. (2008). "Synthesis and characterization of grafted cellulose for use in water and metal ions sorption," BioRes. 3(1), 46-59.	PDF
Ebringerová, A., Hromádková, Z., Košťálová, Z., and Sasinková, V. (2008). "Chemical valorization of agricultural by-products: Isolation and characterization of xylan-based antioxidants from almond shell biomass," BioRes. 3(1), 60-70.	PDF
Hromádková, Z., Malovíková, A., Mozeš, Š., Sroková, I., and Ebringerová, A. (2008). "Hydrophobically modified pectates as novel functional polymers in food and non-food applications," BioRes. 3(1), 71-78.	PDF
Heinze, T., Pfeifer, A., and Petzold, K. (2008). "Functionalization pattern of tert-butyldimethyl-silyl cellulose evaluated by NMR spectroscopy," BioRes. 3(1), 79-90.	PDF
Csóka, L., Lorincz, A., and Winkler, A. (2008). "Sonochemically modified wheat straw for pulp and papermaking to increase its economical performance and reduce environmental issues," BioRes. 3(1), 91-97.	PDF
Galgut, P. N. (2008). "Radiographic observations on the use of two different regeneration materials in a single subject: Case study," BioRes. 3(1), 98-107.	PDF
Talebnia, F., Pourbafrani, M., Lundin, M., and Taherzadeh, M. J. (2008). "Optimization study of citrus wastes saccharification by dilute-acid hydrolysis," BioRes. 3(1), 108-122.	PDF
Montoneri, E., Boffa, V., Quagliotto, P., Mendichi, R., Chierotti, M. R., Gobetto, R., and Medana, C. (2008). "Humic acid-like matter isolated from green urban wastes. Part 1. Structure and surfactant properties," BioRes. 3(1), 123-141.	PDF
Esteves, B. M., Domingos, I. J., and Pereira, H. M. (2008). "Pine wood modification by heat treatment in air," BioRes. 3(1), 142-154.	PDF
Foulk, J. A., Akin, D. E., and Dodd, R. B. (2008). "Influence of pectinolytic enzymes on retting effectiveness and resultant fiber properties," BioRes. 3(1), 155-169.	PDF
Ioelovich, M., and Leykin, A. (2008). "Structural investigations of various cotton fibers and cotton celluloses," BioRes. 3(1), 170-177.	PDF
Mikkonen, K. S., Yadav, M. P., Cooke, P., Willför, S., Hicks, K. B., and Tenkanen, M. (2008). "Films from spruce galactogluccomannan blended with poly(vinyl alcohol), corn arabonoxylan, and konjac glucomannan," BioRes. 3(1), 178-191.	PDF
Subramanian, R., Kononov, A., Kang, T., Paltakari, J., and Paulapuro, H. (2008). "Structure and properties of some natural cellulosic fibrils," BioRes. 3(1), 192-203.	PDF
McSweeny, J. D., Rowell, R. M., Chen, G. C., Eberhardt, T. L., and Min, S.-H. (2008). "Periodate and hypobromite modification of Southern Pine wood to improve sorption of copper ion," BioRes. 3(1), 204-216.	PDF
Montoneri, E., Savarino, P., Bottigliengo, S., Musso, G., Boffa, V., Prevot, A. B., Fabri, D., and Pramauro, E. (2008). "Humic acid-like matter isolated from green urban wastes. Part II: Performance in chemical and environmental technologies," BioRes. 3(1), 217-233.	PDF
Soni, R., Nazir, A., Chadha, B. S., and Saini, H. S. (2008). "Novel sources of fungal cellulases for efficient deinking of composite paper waste," BioRes. 3(1), 234-246.	PDF
Chen, Y., Liu, Y.-F., and Tan, H.-M. (2008). "Preparation of macroporous cellulose-based superabsorbent polymer through the precipitation method," BioRes. 3(1), 247-254.	PDF
Gonzalez, R. W., Saloni, D., Dasmohapatra, S., and Cubbage, F. (2008). "South America: Industrial roundwood supply potential," BioRes. 3(1), 255-269.	PDF
Hu, G., Heitmann, J. A., and Rojas, O. J. (2008). "Feedstock pretreatment strategies for producing ethanol from wood, bark, and forest residues," BioRes. (3(1), 270-294.	PDF
Download entire issue 3(1) as a single file.	PDF

Features of issue no. 2(4), November 2007:

Hubbe, M. A., and Lucia, L. A. (2007). "The 'love-hate' relationship present in lignocellulosic materials," BioRes. 2(4), 534-535.	PDF
Tschirner, J., Barsness, J., and Keeler, T. (2007). "Recycling of chemical pulp from wheat straw and corn stover," BioRes. 2(4), 536-543.	PDF
Zhu, J. Y., Scott, C. T., Gleisner, R., Mann, D., Dykstra, D. P., Quinn, G. H., and Edwards, L. L. (2007). "Mill demonstration of TMP production from forest thinnings: Pulp quality, refining energy, and handsheet properties," BioRes. 2(4), 544-559.	PDF
Chauhan, V. S., Singh, S. P., and Bajpai, P. K. (2007). "Fiber loading of hardwood pulp by in-situ precipitation of aluminosilicate," BioRes. 2(4), 560-571.	PDF
Shulga, G., Betkers, T., Shakels, V., Neiberte, B., Verovkins, A., Brovkina, J., Belous, O., Ambrazaintene, D., and Žukauskaite, A. (2007). "Effect of the modification of lignocellulosic materials with a lignin-polymer complex on their mulching properties," BioRes. 2(4), 572-582.	PDF
Laka, M., and Chernyavskaya, S. (2007). "Obtaining microcrystalline cellulose from softwood and hardwood pulp," BioRes. 2(4), 583-589.	PDF
Langer, V., Lundquist, K., and Parkås, J. (2007). "The stereochemistry and conformation of lignin as judged by X-ray crystallographic investigations of lignin model compounds: Arylglycerol beta-guaiacyl ethers," BioRes. 2(4), 590-597.	PDF
Xie, J., Feng, L., Xu, N., Zhu, G., Yang, J., Xu, X., and Fu, S. (2007). "Studies on the fusion of ligninolytic ezyme cDNAs and their expression," BioRes. 2(4), 598-604.	PDF
Riedlinger, D. A., Sun, N., and Frazier, C. E. (2007). "Tg as an index of conversion in PMDI-impregnated wood," BioRes. 2(4), 605-615.	PDF
da Silva, T. A., Mocchiutti, P., Zanuttini, M. A., and Ramos, L. P. (2007). "Chemical characterization of pulp components in unbleached softwood kraft fibers recycled with the assistance of laccase/HBT system," BioRes. 2(4), 616-629.	PDF
Bianchini, R., Catelani, G., Frino, E., Isaad, J., and Rolla, M. (2007). "Lactose to naturalize textile dyes," BioRes. 2(4), 630-637.	PDF
Saarimaa, V. J., Pranovich, A. V., Sundberg, A. C., and Holmbom, B. R. (2007). "Isolation of pectic acids from bleached TMP water and aggregation of model and TMP pectic acids by calcium," BioRes. 2(4), 638-651.	PDF
Lindfors, J., Salmi, J., Laine, J., and Stenius, P. (2007). "AKD and ASA model surfaces: Preparation and characterization," BioRes. 2(4), 652-670.	PDF
Porankiewicz, B., Bermudez, J. C., and Tanaka, C. (2007). "Cutting forces by peripheral cutting of low density wood species," BioRes. 2(4), 671-681.	PDF
Yang, Q., Zhan, H., Wang, S., Fu, S., and Li, K. (2007). "Bio-modification of eucalyptus chemithermo-mechanical pulp with different white-rot fungi," BioRes. 2(4), 682-692.	PDF
Dwivedi, U. K., Ghosh, A., and Chand, N. (2007). *"Abrasive wear behaviour of bamboo (dendrocalamus strictus) powder filled polyester composites,"* BioRes. 2(4), 693-698.	PDF
Dobele, G., Urbanovich, I., Volpert, A., Kampars, V. and Samulis, E. (2007). "Fast pyrolysis - Effect of wood drying on the yield and properties of bio-oil," BioRes. 2(4), 699-706.	PDF
Taherzadeh, M. J., and Karimi, K. (2007). "Enzyme-based hydrolysis processes for ethanol from lignocellulosic materials: A review," BioRes. 2(4), 707-738.	PDF
Hubbe, M. A., Venditti, R. A., and Rojas, O. J. (2007). "What happens to cellulosic fibers during papermaking and recycling? A review," BioRes. 2(4), 739-788.	PDF
Oltean, L., Teischinger, A., and Hansmann, C. (2007). "Influence of temperature on cracking and mechanical properties of wood during wood drying - A review," BioRes. 2(4), 789-811.	PDF
Download entire issue 2(4) as a single file.	PDF

Features of issue no. 2(3), August 2007:

Hubbe, M. A. (2007). "When is a tree not a resource?" BioRes. 2(3), 332-333.	PDF
Lundquist, K., Parkås, J., Paulsson, M., and Heitner, C. (2007). "Reactions of lignin chromophores of the enal and enone type with sulfite," BioRes. 2(3), 334-350.	PDF
Law, K.-N., Wan Daud, W. R., and Ghazali, A. (2007). "Morphological and chemical nature of fiber strands of oil palm empty-fruit-bunch (OPEFB)," BioRes. 2(3), 351-362.	PDF
Bălaş, A., and Popa, V. I. (2007). *"The influence of natural aromatic compounds on the development of Lycopersicon esculentum* plantlets,"** BioRes. 2(3), 363-370.	PDF
Wang, B., and Sain, M. (2007). "The effect of chemically coated nanofiber reinforcement on biopolymer based nanocomposites," BioRes. 2(3), 371-388.	PDF
Yao, R., Qi, B., Deng, S., Liu, N., Peng, S., and Cui, Q. (2007). "Use of surfactants in enzymatic hydrolysis of rice straw and lactic acid production from rice straw by simultaneous saccharification and fermentation," BioRes. 2(3), 389-398.	PDF
Mocchiutti, P., and Zanuttini, M. A. (2007). "Key considerations in the determination of polyelectrolyte concentration by the colloidal titration method," BioRes. 2(3), 399-407.	PDF
Nenkova, S. (2007). "Study of sorption properties of lignin-derived fibrous composites for the remediation of oil polluted receiving waters," BioRes. 2(3), 408-418.	PDF
Qi, B., and Yao, R. (2007). *"L-lactic acid production from Lactobacillus casei* by solid state fermentation using rice straw,"** BioRes. 2(3), 419-429.	PDF
Thomas, R., Singh, S. P., and Subrahmanyam, S. V. (2007)."A study on oxygen delignification of melocanna baccifera (muli bamboo) kraft pulp," BioRes. 2(3), 430-441.	PDF
Vainio, A. K., and Paulapuro, H. (2007). "Interfiber bonding and fiber segment activation in paper," BioRes. 2(3), 442-458.	PDF
Parasuraman, P., Singh, R., Bolton, T. S., Omori, S., and Francis, R. C. (2007). "Estimation of hardwood lignin concentrations by UV spectroscopy and chlorine demethylation," BioRes. 2(3), 459-471.	PDF
Taherdazeh, M. J., and Karimi, K. (2007). "Acid-based hydrolysis processes for ethanol from lignocellulosic materials: A review," BioRes. 2(3), 472-499.	PDF
Hubbe, M. A., and Heitmann, J. A. (2007). "Review of factors affecting the release of water from cellulosic fibers during paper manufacture," BioRes. 2(3), 500-533.	PDF
Download entire issue 2(3) as a single file.	PDF

Features of issue no. 2(2), May 2007:

Hubbe, M. A. (2007). "Appropriate technology in an age of renewables ," BioRes. 2(2), 146-147.	PDF
Hervillard, T., Cao, Q., and Laborie, M.-P. G. (2007). "Improving water resistance of wheat straw-based medium density fiberboards bonded with aminoplastic and phenolic resins," BioRes. 2(2), 148-156.	PDF
Siverio, F. O., Barbosa, L. C. A., Maltha, C. R. A., Silvestre, A. J. D., Pilo-Veloso, D., and Gomide, J. L. (2007). *"Characterization of lipophilic wood extractives from clones of Eucalyptus urograndis* cultivate in Brazil,"**BioRes. 2(2), 157-168.	PDF
Parkås, J., Brunow, G., and Lundquist, K. (2007). "Quantitative lignin analysis based on permanganate oxidation," BioRes. 2(2), 169-178.	PDF
Sridach, W., Hodgson, K. T., and Nazhad, M. (2007). "Biodegradation and recycling potential of barrier coated paperboards," BioRes. 2(2), 179-192.	PDF
Khezami, L., Ould-Dris, A., and Capart, R. (2007). "Activated carbon from thermo-compressed wood and other lignocellulosic precursors," BioRes. 2(2), 193-209.	PDF
Chakraborty, A., Sain, M. M., Kortschot, M. T., and Ghosh, S. B. (2007). "Modeling energy consumption for the generation of microfibres from bleached kraft pulp fibres in a PFI mill," BioRes. 2(2), 210-222.	PDF
Colodette, J. L., Gomide, J. L., Júnior, D. L., and Pedrazzi, C. (2007). "Effect of pulp delignification degree on fiber line performance and bleaching effluent load," BioRes. 2(2), 223-234.	PDF
Ruelle, J., Yamamoto, H., and Thibaut, B. (2007). "Growth stresses and cellulose structural parameters in tension and normal wood from three tropical rainforest angiosperm species," BioRes. 2(2), 235-251.	PDF
Felissia, F. E., Area, M. C., Barboza, O. M., and Bengoechea, D. I. (2007). "Anti-scaling agents in kraft pulping," BioRes. 2(2), 252-264.	PDF
Alma, M. H., Ertaş, M., Nitz, S., and Kollmannsberger, H. (2007). "Chemical composition and content of essential oil from the bud of cultivated Turkish clove," BioRes. 2(2), 265-269.	PDF
Pérez, J. M., Rodríguez, F., Alonso, M. V., Oliet, M., and Echeverría, J. M. (2007). "Characterization of a novolac resin substituting phenol by ammonium lignosulfonate as filler or extender," BioRes. 2(2), 270-283.	PDF
Altaner, C., Knox, J. P., and Jarvis, M. C. (2007). *"In situ detection of cell wall polysaccharides in sitka spruce (Picea sitchensis* (Bong.) Carrière) wood tissue,"** BioRes. 2(2), 284-295.	PDF
Hubbe, M. A. (2007). "Flocculation and redispersion of cellulosic fiber suspensions: A review of effects of hydrodynamic shear and polyelectrolytes," BioRes. 2(2), 296-331.	PDF
Download entire issue 2(2) as a single file.	PDF

Features of issue no. 2(1), February 2007:

Hubbe, M. A. (2007). "Incinerate, recycle, or wash and reuse," BioRes. 2(1), 1-2.	PDF
Bi, W., and Coffin, D. W., (2007). "Racking strength of paperboard based sheathing materials," BioRes. 2(1), 3-19.	PDF
Lee, J. M., Heitmann, J. A., and Pawlak, J. J. (2007). "Rheology of carboxymethyl cellulose solutions treated with cellulases," BioRes. 2(1), 20-33.	PDF
Boeva-Spiridonova, R., Petkova, E., Georgieva, N., Yotova, L., and Spiridonov, I. (2007). "Utilization of a chemical-mechanical pulp with improved properties from poplar wood in the composition of packing papers," BioRes. 2(1), 34-40	PDF
Bodirlau, R., Spiridon, I., and Teaca, C. A. (2007). "Chemical investigation on wood tree species in a temperate forest, east-northern Romania," BioRes. 2(1), 41-57.	PDF
Betcheva, R. I., Hadzhiyska, H. A., Georgieva, N. V., and Yotova, L. K. (2007). "Biobleaching of flax by degradation of lignin with laccase," BioRes. 2(1), 58-65.	PDF
Oh, M., and Tshabalala, M. A. (2007). "Pelletized ponderosa pine bark for adsorption of toxic heavy metals from water," BioRes. 2(1), 66-81.	PDF
Marshall, W. E., Wartelle, L. H., and Akin, D. E. (2007). "Flax shive as a sources of activated carbon for metals remediation," BioRes. 2(1), 82-90.	PDF
Subramanian, R., Fordsmand, H., and Paulapuro, H. (2007). "Precipitated calcium carbonate (PCC) - cellulose composite fillers: Effects of PCC particle structure on the production and properties of uncoated fine paper," BioRes. 2(1), 91-105.	PDF
Hubbe, M. A. (2007). "Paper's resistance to wetting - A review of internal sizing chemicals and their effects," BioRes. 2(1), 106-145.	PDF
Download entire issue 2(1) as a single file.	PDF

Features of our second issue (Nov. 2006):

Hubbe, M. A. (2006). "From here to sustainability," BioRes. 1(2), 172-173.	PDF
Green, C. (2006). "Improved pulp evaluations using a combination of free and restrained drying of handsheets," BioRes. 1(2), 174-175.	PDF
Janardhnan, S., and Sain, M. (2006). "Isolation of cellulose microfibrils - An enzymatic approach," BioRes. 1(2), 176-188.	PDF
Wu, B., Zhao, Y., and Gao, P. J. (2006). "A new approach to measurement of saccharifying capacities of crude cellulase," BioRes. 1(2), 189-200	PDF
Papadopoulos, A. N. (2006). "Property comparisons and bonding efficiency of UF and PMDI bonded particleboards as affected by key process variables," BioRes. 1(2), 201-208.	PDF
Dobreva, D., Nenkova, S., and Vasileva, St., "Morphology and mechanical properties of polypropylene-wood flour composites," BioRes. 1(2), 209-219.	PDF
Abdul Khalil, H. P. S., Siti Alwani, M., and Mohd Omar, A. K. (2006). "Chemical composition, anatomy, lignin distribution, and cell wall structure of Malaysian plant waste fibers," BioRes. 1(2), 220-232.	PDF
Gruver, T. M., and Brown, N. R. (2006). "Penetration and performance of isocyanate wood binders on selected wood species," BioRes. 1(2), 233-247.	PDF
Liang, L., Mao, Z., Li, Y., Wan, C., Wang, T., Zhang, L., and Zang, L. (2006). "Liquefaction of crop residues for polyol production," BioRes. 1(2), 248-256.	PDF
Huang, C. B., Jeng, R., Sain, M., Saville, B. A., and Hubbes, M. (2006). *"Production, characterization, and mechanical properties of starch modified by Ophiostoma spp.,"* BioRes. 1 (2), 257-269.	PDF
Hoenich, N. (2006). "Cellulose for medical applications: Past, present, and future," BioRes. 1 (2), 270-280.	PDF
Hubbe, M. A. (2006). "Bonding between cellulosic fibers in the absence and presence of dry-strength agents - A review," BioRes. 1(2), 281-318.	PDF
Download entire issue 1(2) as a single file.	PDF

Features of our first issue (July 2006):

Hubbe, M. A. and Lucia, L. A. (2006). "BioResources - An online scientific journal devoted to lignocellulosic materials for new end uses and new capabilities" BioRes. 1(1), 1-2.	PDF
Freire, C. S. R., Pinto, P. C. R., Santiago, A. S., Silvestre, A. J. D., Evtuguin, D. V., and Pascoal Neto, C. (2006). "Comparative study of lipophilic extractives of hardwoods and corresponding ECF bleached kraft pulps," BioRes. 1(1), 3-17.	PDF
Ghatora, S. K., Chadha, B. S., Badhan, A. K., Saini, H. S., and Bhat, M. K. (2006). "Identification and characterization of diverse xylanases from thermophilic and thermotolerant fungi," BioRes. 1(1), 18-33.	PDF
Bajpai, P., Anand, A., Sharma, N., Mishra, S. P., Bajpai, P. K., and Lachenal, D. (2006). "Enzymes improve ECF bleaching of pulp," BioRes. 1(1), 34-44.	PDF
Shatalov, A. A., and Pereira, H. (2006). "Papermaking fibers from giant reed (Arundo donax L.) by advanced ecologically friendly pulping and bleaching technologies," BioRes. 1(1), 45-61.	PDF
Papadopoulos, A. N. (2006). "Decay resistance of cement-bonded oriented strand board," BioRes. 1(1), 62-66.	PDF
Papadopoulos, A. N. (2006). "Chemical modification of pine wood with propionic anhydride: Effect on decay resistance and sorption of water vapour," BioRes. 1(1), 67-74.	PDF
Lucia, L. A., Willett, B., and Korppi-Tommola, J. (2006). "Laser-induced plasma emission spectroscopy (LIPS): A useful analytical tool for the surface chemical characterization of coated paper materials," BioRes. 1(1), 75-92.	PDF
Moghtaderi, B., Sheng, C., and Wall, T. F. (2006). "An overview of the Australian biomass resources and utilization technologies," BioRes. 1(1), 93-115.	PDF
Hubbe, M. A. (2006). "Sensing the electrokinetic potential of cellulosic fiber surfaces," BioRes. 1(1), 116-149.	PDF
Lee, S. Y., Hubbe, M. A., and Saka, H., (2006). "Prospects for biodiesel as a byproduct of wood pulping - A review," BioRes. 1(1), 150-171.	PDF
Download entire inaugural issue as a single file.	PDF

Purpose: To promote scientific discourse and foster scientific developments related to sustainable manufacture involving lignocellulosic or woody biomass resources, including crop residues.

Focus: Advances in the science and technology of utilization of biomass obtained from wood, crop residues and other materials containing cellulose, lignin, and related biomaterials. Emphasis is placed on bioproducts, bioenergy, papermaking technology, new manufacturing materials, composite structures, and chemicals derived from lignocellulosic biomass.

Format: An open-access, web-based journal, with abstracts appearing in hypertext meta-language (HTML), and full articles downloadable for free as Adobe portable document format (PDF) files. Authors use a template to prepare article in final format.

Peer-Review Policy: All research articles and scholarly review articles subject to a peer review process managed by the co-editors, with oversight by the Editorial Board. BioResources employs an automated system for web-based submission of articles.

Co-Editors: Dr. Lucian A. Lucia and Dr. Martin A. Hubbe, Department of Wood and Paper Science, College of Natural Resources, North Carolina State University, Box 8005, Raleigh, NC 27695-8005. USA.