DRAWING LIMITS Command:

The DRAWING LIMITS command allows you to configure the size of the drawing space in AutoCAD.

To access the Drawing Limits command you can:

type limits at a Command: prompt

OR

select Drawing Limits under the Format Menu.

--Prompt: Reset Model space limits
ON/ OFF/ <Lower left corner> <0,0 or current setting here>: Type in an absolute coordinate or press Enter to select default setting. NOTE: It is best to leave the Lower Left setting at the 0,0 .

--Prompt: Upper right corner <12,9 or current setting here>: Type in a new absolute coordinate value for this corner and press Enter. NOTE: The default limits values in AutoCAD are 12 and 9. If you change to Metric units, the numbers change to the equivalent value in millimeters.