The following set of images demonstrates how to complete the connection of the LabPro to a personal computer (pc) using a serial connection. You will need the following cable:

A serial cable which may be used with a Macintosh or a personal computer and is packaged with the LabPro.

The serial connection on the back of the computer should look similar to the image to the right.
The serial cable is then attached to the serial connection on the back of the computer. The serial cable is then attached to the LabPro by sliding the door on the side of the LabPro so that the serial connection is visible.

©2000-2002 April A. Cleveland for Science Junction, NC State University.
All rights reserved.
URL: http://www.ncsu.edu/sciencejunction/route/usetech/MBL/connections/serialconpc.html
Last updated 07/30/02

Microcomputer-Based Laboratories  | Learning to Use Technology  | Teaching With Technology |