NS State University logo
College of Natural Resources
A peer-reviewed journal devoted to the science of lignocellulosic materials, chemicals, and applications
B i o R e s o u r c e s

ARTICLES & Keyword Search

Author instructions

Author submissions

Editorial board

Editorial policies

Files on university server:
- Back & current issues
- Editorials
- Research articles
- Scholarly reviews

Letters to editor

Reviewer and editor functions

Opportunities for graduate study and research

Print edition

Home page, this site

Cover May 2007

Cover, Volume 2, Issue 1

Cover of issue 2, vol. 1

Cover, Vol. 1, Issue 1

BioResources Volume 1, Issue 1

July 2006

Article Type
Pages
Item
Ab-stract
Full article
    Download entire issue as file  
Editorial
1-2
Hubbe, M. A. and Lucia, L. A. (2006). "BioResources - An online scientific journal devoted to lignocellulosic materials for new end uses and new capabilities" BioRes. 1(1), 1-2.
Research article
3-17
Freire, C. S. R., Pinto, P. C. R., Santiago, A. S., Silvestre, A. J. D., Evtuguin, D. V., and Pascoal Neto, C. (2006). "Comparative study of lipophilic extractives of hardwoods and corresponding ECF bleached kraft pulps," BioRes. 1(1), 3-17.
Research article
18-33
Ghatora, S. K., Chadha, B. S., Badhan, A. K., Saini, H. S., and Bhat, M. K. (2006). "Identification and characterization of diverse xylanases from thermophilic and thermotolerant fungi," BioRes. 1(1), 18-33.
Research article
34-44
Bajpai, P., Anand, A., Sharma, N., Mishra, S. P., Bajpai, P. K., and Lachenal, D. (2006). "Enzymes improve ECF bleaching of pulp," BioRes. 1(1), 34-44.
Research article
45-61
Shatalov, A. A., and Pereira, H. (2006). "Papermaking fibers from giant reed (Arundo donax L.) by advanced ecologically friendly pulping and bleaching technologies," BioRes. 1(1), 45-61.
Research article
62-66
Papadopoulos, A. N. (2006). "Decay resistance of cement-bonded oriented strand board," BioRes. 1(1), 62-66.
Research article
67-74
Papadopoulos, A. N. (2006). "Chemical modification of pine wood with propionic anhydride: Effect on decay resistance and sorption of water vapour," BioRes. 1(1), 67-74.
Research article
75-92
Lucia, L. A., Willett, B., and Korppi-Tommola, J. (2006). "Laser-induced plasma emission spectroscopy (LIPS): A useful analytical tool for the surface chemical characterization of coated paper materials," BioRes. 1(1), 75-92.
Review
93-115

Moghtaderi, B., Sheng, C., and Wall, T. F. (2006). "An overview of the Australian biomass resources and utilization technologies," BioRes. 1(1), 93-115.

Review
116-149
Hubbe, M. A. (2006). "Sensing the electrokinetic potential of cellulosic fiber surfaces," BioRes. 1(1), 116-149.
Review
150-171
Lee, S. Y., Hubbe, M. A., and Saka, H. (2006). "Prospects for biodiesel as a byproduct of wood pulping - A review," BioRes. 1(1), 150-171

NOTE: Each current issue of BioResources continues to build as new articles are approved.

ABSTRACTS

Hubbe, M. A., and Lucia, L. A. (2006). "BioResources - an online scientific journal devoted to lignocellulosic materials for new uses and new capabilities," BioRes. 1(1), 1-2.

In this inaugural issue, the Co-Editors of BioResources would like to welcome you. In your role as a reader, we welcome you to download scholarly articles and opinion pieces; this is an open-access journal, providing a maximum of potential impact. BioResources will deal with new and emerging uses of materials from lignocellulosic sources, including wood and crop residues. Topics will include biofuels, biomass-derived chemical products, papermaking technology, and other new or improved uses of biomaterials. We also would like to welcome you as a prospective author. Our goal is to maintain very high standards of peer-review, as well as providing a mix of scholarly research articles, review articles, and editorials. By using an automated, online system of review and publication, we hope to accelerate scientific discourse. Our hope is to contribute to progress in the direction of a post-petroleum economy, taking advantage of the renewable, biodegradable, and relatively abundant nature of materials from lignocellulosic sources. FULL TEXT (pdf)

Freire, C. S. R., Pinto, P. C. R., Santiago, A. S., Silvestre, A. J. D., Evtuguin, D. V., and Pacoal Neto, C. (2006). "Comparative study of lipophilic extractives of hardwoods and corresponding ECF bleached kraft pulps," BioRes. 1(1), 3-17; FULL TEXT (pdf)

The lipophilic extractives of Eucalyptus globulus , Eucalyptus grandis , Eucalyptus urograndis , Betula verrucosa and Acacia mangium woods and of the corresponding ECF bleached kraft pulps, were characterised by GC-MS. The five hardwoods showed significant differences in the content and composition of the main families of extractives, namely fatty acids, long chain aliphatic alcohols and sterols. Significant differences in the composition persist after wood pulping and ECF bleaching of pulps. The fate of the various types of extractives during the wood and pulp processing is discussed. Long chain aliphatic acids and alcohols are quite stable during the pulp production and are retained to a great extent in the final bleached pulp; delta 5 sterols are mostly oxidised and partially retained in the pulps, while delta 7 sterols are completely degraded and/or dissolved. B. verrucosa and A. mangium bleached pulps show contents of fatty acids about 4 and 20 times higher than that of Eucalyptus pulps, respectively, while the content of long chain aliphatic alcohols in A. mangium pulp is of the order of 100 times higher than Eucalyptus and B. verrucosa pulps. FULL TEXT (pdf)

Ghatora, S. K., Chadha, B. S., Badhan, A. K., Saini, H. S., and Bhat, M. K. (2006). "Identification and characterization of diverse xylanases from thermophilic and thermotolerant fungi," BioRes. 1(1), 18-33; FULL TEXT (pdf)

Thirteen fungal isolates included in this study expressed multiple xylanase isoforms as observed by xylan zymograms of polyacrylamide gel electrophoresis (PAGE) and isoelectrofocussing (IEF) fractionated proteins. Eighty-three xylanases produced by these thermophilic and thermotolerant strains were detected using the IEF profiling technique. Xylanases identified on the basis of their isoelectric points (pI) were functionally diverse and exhibited differential catalytic activities against various xylan types (birch wood xylan, larch wood xylan, oat spelt xylan, rye arabino xylan and wheat arabino xylan) as well as debranched arabinan. Thermophilic isolates, Chaetomium thermophilum , Humicola insolens , Melanocarpus sp., Malbranchea sp. and Thermoascus aurantiacus , were found to produce alkaline active xylanases that showed a bleach boosting effect on Decker pulp resulting in increased brightness (1.60-2.04 ISO units). FULL TEXT (pdf)

Bajpai, P., Anand, A., Sharma, N., Mishra, S. P., Bajpai, P. K., and Lachenal, D. (2006). "Enzymes improve ECF bleaching of pulp," BioRes. 1(1), 34-44. FULL TEXT (pdf)

The delignification efficiency of different laccase enzymes was examined on the eucalyptus Kraft pulp. The laccase enzyme from Trametes versicolor showing the highest delignification efficiency was selected and used in the elemental chlorine-free bleaching sequence for improving the pulp bleachability. A n appreciable reduction in chlorine dioxide consumption was also obtained. Further reduction in chlorine dioxide consumption was obtained when the same laccase treated pulp was subjected to an acid treatment after the extraction stage followed by the DE P D sequence. Elemental-chlorine free bleaching was also performed using the xylanase-laccase treated pulp. Xylanase treatment was incorporated to the laccase mediator system in the elemental-chlorine free bleaching both sequentially and simultaneously. The bleaching sequence DE P D followed and in both the cases, the reduction in chlorine dioxide consumption was greater in comparison to the control. The chlorine dioxide consumption was reduced further when xylanase-laccase treated pulp was given an additional acid treatment. The final pulp properties of the treated pulps were comparable to the control pulp. FULL TEXT (pdf)

Shatalov, A. A., and Pereira, H. (2006). "Papermaking fibers from giant reed (Arundo donax L.) by advanced ecologically friendly pulping and bleaching technologies," BioRes. 1(1), 45-61. FULL TEXT (pdf)

The anatomical structure and chemical composition of the stem-wall material of giant reed is considered from the viewpoint of raw material characterization for industrial fiber production. The effect of stem morphology (nodes and internodes) on pulping results and general pulp properties is discussed. The advantages of application of modern organic solvent based (organosolv) pulping technologies to giant reed are shown in comparison with the conventional (kraft) method. The conditions optimization for Ethanol-Alkali pulping (a selected organosolv pulping process) is given, and the chemical kinetics of the principal macromolecular components during ethanol-alkali pulping is described. The bleachability of organosolv pulps by short totally chlorine free (TCF) bleaching sequences using hydrogen peroxide and ozone as the active bleaching chemicals without pulp pre-delignification is examined and compared with kraft pulps. The enzymatic pre-treatment of reed organosolv pulps by commercial xylanase preparation is considered as a possibility toward the improvement of pulp bleachability. FULL TEXT (pdf)

Papadopoulos, A. N. (2006). "Decay resistance of cement-bonded oriented strand board," BioRes. 1(1), 62-66. FULL TEXT (pdf)

The objective of this study was to evaluate the decay resistance of cement bonded oriented strand board (OSB) against brown ( Coniophora puteana) and white rot ( Termites versicolor ) fungi. Overall, both fungi failed to attack the cement-bonded OSB. Boards made with 3.0 cement-to-wood ratio showed weight gain instead of weight loss. Therefore, it is recommended that cement-bonded OSB is technically suitable for exterior use where both moisture and favourable conditions for fungi development are present. FULL TEXT (pdf)

Papadopoulos, A. N. (2006). "Chemical modification of pine wood with propionic anhydride: Effect on decay resistance and sorption of water vapour," BioRes. 1(1), 67-74.

The purpose of this paper is to show the effects of level of substitution with a linear chain anhydride (propionic anhydride) on decay resistance and on water vapour sorption of modified Scots pine sapwood. The work described herein has demonstrated that chemically modified Scots pine sapwood with propionic anhydride afforded substantial bioprotection against Coniophora puteana . It required a weight gain of approximately 17% following reaction to ensure complete protection. The sorption of water vapour of propionic anhydride modified wood was greatly reduced.

Lucia, L. A., Willett, B., and Korppi-Tommola, J. (2006). "Laser-induced plasma emission spectroscopy (LIPS): A useful analytical tool for the surface chemical characterization of coated paper materials," BioRes. 1(1), 75-92. FULL TEXT (pdf)

A nontraditional method for chemical analysis of light weight coated (LWC) grade paper is described. Laser-induced plasma emission spectrometry (LIPS) produces three-dimensional profiles of coatings and fillers. The technique ablates the coating from the top to the paper base with a laser beam. LIPS provides spatial resolution and characterization of the chemical homogeneity of the paper coating and relates that information to the efficiency of the coating method. It provides information on binder migration which is a hindrance for improved stable coatings. Herein, several commercial LWC paper grades and their base papers were analyzed. Pigment identification of light weight paper coatings, coat weight distribution maps, and profiles were obtained. Blade and film coating generate different coating distribution profiles that are detected by LIPS. The phenomenon of binder migration was demonstrated by observing its masking effects on Si spectra. An investigation of filler content in base papers involved analysis of base paper used in LWC grades. The papers represented two different types of formers, but because of confidentiality issues, little else was revealed. A significantly higher amount of filler was observed at the surface of the base stock in Former A than in Former B, as indicated from Mg spectra of the filler. FULL TEXT (pdf)

Moghtaderi, B., Sheng, C., and Wall, T. F., "An Overview of the Australian Biomass Resources and Utilization Technologies," BioRes. 1(1), 93-115. FULL TEXT (pdf)

Information on Australian biomass resources including bagasse, black liquor from paper pulp production, wood waste and forestry residues, energy crops, crop wastes, food and agricultural wet waste, and municipal solid wastes is provided in the review. The characteristics of the Australian biomass are typical of those of other countries, i.e. high moisture and volatile matter, low heating value and density, and low sulfur and nitrogen content, but high Ca and Mg for woody biomass. The characteristics influence biomass utilization. Biomass is used extensively at present within Australia , primarily for domestic heating, as bagasse in the sugar industry, and for electricity generation. Biomass usage for electricity generation is increasing and is expected to reach 5.2 Mt/year by 2019-20. Exports, as wood chips, are approximately 10 Mt/year in 2000-01. Forestry residues have been estimated to be 23 Mt/year. Current technologies that utilize biomass in Australia include those for electricity and heat by direct combustion, cofiring with coal and fluidized bed combustion), for biogas generation (from landfills, and aerobic digestion, and as bio-liquids. Related to bio-liquid fuels, ethanol production from molasses and wheat is making progress. The resultant ethanol is used as a petrol extender, and a bio-diesel process is under development. FULL TEXT (pdf)

Hubbe, M. A. (2006). "Sensing the electrokinetic potential of cellulosic fiber surfaces," BioRes. 1(1), 116-149. FULL TEXT (pdf)

The charged nature of a cellulosic fiber surface is expected to play major roles in such phenomena as fiber dispersion, flocculation, adhesion, and adsorption of polyelectrolytes. This review focuses on the evaluation of such charges by means of electrokinetic measurements, with emphasis on the fiber-pad streaming potential technique. Results of recent experiments suggest that a continuous network or networks of pores below the outer surface of a kraft fiber can significantly contribute to observed streaming potential data. At present it is not clear whether the main subsurface contributions to the observed electrokinetic effects come from fibrillar layers on the fiber surfaces or from systems of nanopores within the cell walls of fibers. Based on the literature it is possible to suggest two conceptual models to account for the fact that the streaming potential of polymer-treated fibers can change in sign, dependent on the concentration of salt. Additional research is needed to clarify various theoretical and practical points. There may be oppor-tunities to make more effective use of streaming potential tests in the future by carrying out such tests at reduced salt levels. FULL TEXT (pdf)

Lee, S. Y., Hubbe, M. A., and Saka, H., "Prospects for biodiesel as a byproduct of wood pulping - A review," BioRes. 1(1), 150-171. FULL TEXT (pdf)

Effective utilization of byproducts can affect the profitability of kraft pulping to produce cellulosic fibers from wood. This review considers opportunities to use tall oil components, obtained from kraft pulping, as a source of raw material for biodiesel fuel, or as a source of additives for petrodiesel. Considerable progress has been achieved with respect to converting vegetable oils to diesel fuel, and some of what has been learned appears to have potential application for processing of wood-derived fatty acids and related compounds. Alkaline - catalyzed trans esterification strategies, while seemingly well adapted for relatively pure vegetable oil source materials, may not be the best fit for the processing of tall oil fractions. The promising strategies to consider include acid - catalyzed esterification, enzymatic processes, hydrogenation, and the use of supercritical methanol . FULL TEXT (pdf)